kix76

Hi tom I have no t_hum parts installed yet. ( sent yestarday an email, waiting) It's stock, just a custom prometheus barrel installed. Thanks for the tip, now I'm sure it's piston cup. Kinda unusable now ( I used the gun w/ propane ), I tryed to refurbish it, heated w/ a lighter and rebuild the mushroom. It's working now, with a lot of silicon grease, but it's for another 1000 or so bbs i suppose. (now I'm at 5-6000 bbs total , all with propane & 1 can of GG) I will install t_hum piston ...

I have 4 magazines and already checked that. It's ok.. but still 20 bbs fired , low and slow recoil after 10bbs...

Hi, Today, at 20 Celsius, I had a great decrease in power. With a full filled magazine (gas&bbs) , I just get gas to fire 20-25 bbs, and a loose of 20% at bb speed also. Usualy it shoots like 60bbs per fill. Any suggestions ?

what about hopup issue ? my bbs even with max hop just go straight and after 35-40m drops. anyone else got this problem ? - i did not siliconed the mag or the hopup bucking and this is still happening after 1500 bbs . - i used 0.20, 0.23, 0,25, 0.3 , same result just bigger range as weight increases ( so practicaly i dont have a hop up system) . - as temporary fix, I used teflon tape to squish a little the gum, but the precision is too bad now.

nonono, the cuts are made as perfect as possible ... and this issue I had with the stock barrel also. Out of the box, even with max hop and 0.2 bb, the trajectory was straight and down at 35-40 m. no "up" .

Hi guys, I have one , what ?! this awesome GBB . Today i took it for the first time at the field. Totaly I shooted about 1200 rounds ( 200 0.25 and 1000 0.3 ). Prior to play I made some mods - hopup teflon tape mod .That's because I think I have the hopup issue. I didnt know there was such an issue, I was thinking that's normal ( all bbs, even 0.20, 0.23, 0.25 drop about 40m away even with max. hop, I was thinking something like "maby this is the way TK loves it" ) ). Anyway, w/ teflon tape after a lot of testing I've found a "position" , but it's now fixed for 0.3 . - barrel SR

I got a lemon ( cracked hop-up chamber, the rubber taped w/ paper tape rubbe! , bbs falling). bolt stop (catch?) not functional , i repaired the mag "bolt pusher" but that one needs too much force so i suppose it's "bugged" (are any guide to fix this available? before i try my way ) I have good know-how w/ AEGs but this is my first GBB rifle. I need some help w/ parts and terminology. can someone point me ?