Kalmar

The height over bore is higher, but the sight plane in relation to the 12 o'clock rail is the same.

The SCAR lower has a different curvature than an AR above the rear of the pistol grip meaning high back straps won't fit. Though five minutes with a dremel can easily fix that.

I thought that fad had died out by now...

The WE SCAR bolt does not reciprocate the full length as on the real weapon, I'd say about 3/4 the distance at most.

Tokyo Marui - The only Gen III replica that matches form and function of the real deal. I use mine for fun and for training as well.

Affording one is only half the battle, finding it is usually much harder.

Internal: Prometheus 363mm Barrel, Hard Piston, Piston Head, Aero Cylinder Head, Stainless Type C Hard Cylinder, Air Seal Nozzle, Bearing Spring Guide, Double Torque Hard Gear Set, Enhanced Anti-Reversal Latch and 6mm Bushings. LayLax Adjustable Length Outer Barrel. Echigoya Tourque-Up motor and Eagle6 M120 Spring. External: Insight Technology PEQ-15 ATPIAL, M3X and Dual Remote Switch. EOTech 553/ Elcan Specter DR 1-4x w/Docter Reflex II. Tango Down Stubby Grip and Rail Panels, Blue Force Gear Padded VCAS 2-Point Sling.

Are the pistol grips on the SCAR the same as for the SOPMOD? I also found a replacement bolt catch, so hopefully I'll be back in operation soon.

I wish, at least then I could understand how it broke. I noticed this crack today after installing a new Eagle6 spring and screwing the pistol grip back on - Had not even shot it yet... (There's another small fracture just in front of the grip on the lower receiver.)

So is there any way to fix this? My mag release button is also broken, any way to get replacement parts without buying a whole new gun?

Having problems installing the Prometheus Type A cylinder, seems about 1mm too long. Any ideas? My first time upgrading an AEG so might be doing something wrong.

The Tango Down "Extended Modula Rail System" is actually a replacement for the entire bottom rail. The only points at which it is connected to the reciever are the barrel trunnion and front barrel removal screws. That means it is able to retain the SCAR's quick change capability. The Nitro rail looks to be an extension of the side rails, meaning in order to remove the barrel you would have to take off those as well (not an easy process) - But this is only airsoft so it shouldn't be an issue!

New project gun: EOTech 553/Elcan Specter DR w/ Docter Insight ATPIAL, M3X, RMT Tango Down rail panels and grip

I should be able to find out the difference for you, will be posting an in depth photo comparison soon... You could say I'm a bit SCAR obsessed.

The real SCAR can not accept standard AR pistol grips without slight modification to the lower receiver grip tang - TM is just being true to the actual design.

This should help...

The SCAR-H receiver is about an inch longer than the L. The military is currently fielding a 5.56mm conversion kit for the Heavy, however the Mk16 receiver can not be upgraded to 7.62mm. This is one of the reasons SOCOM no longer needs the SCAR-L, when the Mk17 can shoot both calibers and everything in between.

Apparently there were a few left floating around off the production line, you just gotta know where to find em

I've got the one you see converted with GHK gas internals and yes it is operable. The rest have not been converted yet and I've simply decided to keep them that way for the time being.

Yeah rest assured it wasn't cheap. The PMAG's are an ongoing project but I've decided to stop converting them now that I'm getting into RS.

This is airsoft lol, no such thing as overkill. Our whole sport is based on the premise of things you don't actually need.. but does that stop people from spending thousands on night vision or high speed setups? Not in the least. With that said, I'll agree the Elcan isn't the most practical for airsoft - rather I got it for a 5.56 mm project I'm working towards

Ok I haven't contributed to this thread yet but I think my offering is worthy especially considering it's been in every other thread so far but this one.. Here is my WA Troy M7A1 Gas Blow Back, in several configurations - Iron sights, EOTech 553, and Elcan SpecterDR. All Mappul accessories are real deal (including PMAG), no PTS here

No. This is a brand new, SOCOM overrun model, which fixed the issues with previous generation sights.

..posting this on every relevant thread, you can tell I'm quite happy with my newest addition to the collection

Ok well I didn't think Seraphim would spoil the surprise that quickly but here it is anyway; My new Elcan SpecterDR - SOCOM variant ...and now it's time to post this on every single weapon thread