-
Content Count
279 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Posts posted by lance201
-
-
Hi, I do not want to offend you, but to you really want to call this a review? With thw wobble from the mag in the mag well, may be you can put some polster tape in the mag in the right place to prevent it, I did this with my Classic Army M15, and it works well. All the other AEGs that i have and are compatible to M4 mags (Star FNC, Aimtop M4) have a right tight fit and with a real tight fit you will get other problems...
And I think the KA M4A1 has the same iron sights as all the other M4A1 airsoft guns out there isn't it? I think for airsoft they should do their job, may be you will need a little practice and try to zero in your sights first.
Lance
-
arggh where is the review? Thought this is the review section?
Lance
Btw. the SD97 is a well MB05 and this is 100% VSR10 compatible
-
thank you steaktipz, that sounds good to me.
Lance
-
ok, I understand that the advice is to stick with the Cyma RPK highcaps. So does anybody know, how many BBs this mag feeds until you have to turn the spinning wheel again?
Thx Lance
-
thx for the source of the bibod. And with the magazines, it`s the CM HCs or electrical drum mags. will the cyma drum mags fit?
Lance
-
One other thing worries me, the mag compatibilty of the gun. I own a cyma AKM (CM 048M) which is very picky even with the CM-Mags I bought. I don't like usual Highcaps so the question is, will the MAG Mid Caps for RPK74 fit end feet and what about the cyma AK electrical drum mags?
And are there any adivces for the internals beyond reshimming and changing the hop up rubber?
Thx Lance
BTW. at gunfire.pl is this thing at sale for a very low price in my opinion...
-
Do you now any source for a real steel bipod kit? Don't like the thought of a fast broken bipod when going prone...
Lance
-
You wrote "8.4 lipo"...
Also, I highly recommend replacing the part that connects the bipod to the barrel, it is potmetal and will break by simply leaving your gun tilted on the bipod(as it happened many times to many people; including to myself at Operation EastWind IV).
replacing with what? original parts?
thx lance
-
aeh... where is the review in this threat?
Lance
-
..they fit if they are they were for the right "gassystem", System7/NS2 and without this.
Lance
-
these ones will fit:
http://www.begadishop.de/catalog/product_info.php?cPath=585_88_81_413&products_id=5779
and this is a real nice one:
http://www.bilder-space.de/bilder/92293a-1287139490.jpg
available at konrad.technik@hotmail.com
Lance
-
In case anyone is interested, I emailed ARES directly about getting a G36C stock for my K, because I like the shorter pull. I paypaled them and they shipped it pretty quickly. So you can get extra barrels, stocks, whutevers directly from them pretty easily
also TM/CA buttpads fit on the ARES but not the other way around.
Do you mean ARES in the US or in HK? Because last time I emailed ARES in HK for a spare part or for accessories the answer was to go to the local dealer...
Thx Lance
-
Do you mean when the bipod is folded away it has a little play, yes they all do that.
The middle pin should have a metal ring to fix it in place, the rear pin dosn't have this and can be loose. I use a little strip of electrical tape to fix it in place.
thx, yes I meant the bipod folded. What metal ring? can you make a picture of the pin with the metal ring, cause I think there is no metal ring at mine.
Lance
-
hi somegirls,
is this rust on the screw and the long pin holding the dustcover in this picture here?
Lance
-
Hi,
when I attach the bipod to the metalframe under the barrel, there is still enough room for the bipod to woble from side to side a bit, is this normal? And the pin which fixes upper and lower together gets loose very easily, so I am afraid to loose it in the field.
thx Lance
-
One question, does the burst-mode always work with your M93? It doesn't with mine, sometimes the gun shoots full auto although the selector is at burst...
Thx Lance
-
Hi,
when you look at the KWA-USA-Website at the M93R:
http://www.kwausa.com/products_m93r_ns2.html
they also say:
- Slide Material = Metal Alloy
- Frame Material = Composite Polymer (plastic )
- Outer Barrel = High Impact Polymer (plastic )
So if you have one with a metal barrel and -frame, I would like to know where you have it from.
thx Lance
-
Look and Feel:
The look of the gun, is just phenomenal, it looks like the real Baretta m93r and in plain simple words its just sick! It weights in about 2 lbs, which isn't heavy at all for a pistol, some of you may wonder why it may be heavier then others GBP its because its full metal (except a few parts).
Hi,
you must have a different version than I have, because the KWA M93R NS2 that I have, has only a metal slide and the folding foregrip is made from steel, the rest (frame, barrel etc. is plastic). Nevertheless I like the gun also very much. If you understand german you can read my review here:
Lance
-
-
The sling used in this review is an Urban ERT two point/one point sling. However, I've used the original SA-80 sling on it as well and that's fine when properly setup.
Any hint how to "properly setup" this thing?
thx lance
-
I was wrong and Ed-Skar was right, there is a railmount in the package. So I think I will use this new elcan spectre dr clone from EB.
I also bought a original SA80 sling... but there must be better slings for this, what sling is used in this review?
thx Lance
-
PS, the ICS L86 comes with both the 19mm doverail and a 20mm RIS. I assume the other ICS Saties do as well.
No, I think only the starter releases came with the additional rail...
Lance
-
Ok, thx for the answer, I ordered it. What I like to know from the owners is, if I better install a susat (is the acm produkt ok?) or a rail with some other optic not in the terms of looks but in the terms of usability.
Lance
-
Hi,
I am thinking about buying one, can it take 11,1 V Lipos out oft the box?
Thx lance
Magpul PTS PDR-C
in Rifles (AEG)
Posted · Edited by lance201
Oh yes, my real steel experiences whilst my millitary service were, that I can not hit a target in man size at a distance of 50 meters with a 9mm Pistol even with iron sights steadily, maybe one of three and so did all my comrades! So with just sighting over the barel I asume to hit nothing, only making some shot noice !
Lance