lance201

Oh yes, my real steel experiences whilst my millitary service were, that I can not hit a target in man size at a distance of 50 meters with a 9mm Pistol even with iron sights steadily, maybe one of three and so did all my comrades! So with just sighting over the barel I asume to hit nothing, only making some shot noice ! Lance

Hi, I do not want to offend you, but to you really want to call this a review? With thw wobble from the mag in the mag well, may be you can put some polster tape in the mag in the right place to prevent it, I did this with my Classic Army M15, and it works well. All the other AEGs that i have and are compatible to M4 mags (Star FNC, Aimtop M4) have a right tight fit and with a real tight fit you will get other problems... And I think the KA M4A1 has the same iron sights as all the other M4A1 airsoft guns out there isn't it? I think for airsoft they should do their job, may be you will need a

arggh where is the review? Thought this is the review section? Lance Btw. the SD97 is a well MB05 and this is 100% VSR10 compatible

thank you steaktipz, that sounds good to me. Lance

ok, I understand that the advice is to stick with the Cyma RPK highcaps. So does anybody know, how many BBs this mag feeds until you have to turn the spinning wheel again? Thx Lance

thx for the source of the bibod. And with the magazines, it`s the CM HCs or electrical drum mags. will the cyma drum mags fit? Lance

One other thing worries me, the mag compatibilty of the gun. I own a cyma AKM (CM 048M) which is very picky even with the CM-Mags I bought. I don't like usual Highcaps so the question is, will the MAG Mid Caps for RPK74 fit end feet and what about the cyma AK electrical drum mags? And are there any adivces for the internals beyond reshimming and changing the hop up rubber? Thx Lance BTW. at gunfire.pl is this thing at sale for a very low price in my opinion...

Do you now any source for a real steel bipod kit? Don't like the thought of a fast broken bipod when going prone... Lance

replacing with what? original parts? thx lance

aeh... where is the review in this threat? Lance

..they fit if they are they were for the right "gassystem", System7/NS2 and without this. Lance

these ones will fit: http://www.begadishop.de/catalog/product_info.php?cPath=585_88_81_413&products_id=5779 http://shop.ehobbyasia.com/tokyo-marui-7-2v-500mah-hydride-battery-for-electric-fixed-slide-pistols.html and this is a real nice one: http://www.bilder-space.de/bilder/92293a-1287139490.jpg available at konrad.technik@hotmail.com Lance

Do you mean ARES in the US or in HK? Because last time I emailed ARES in HK for a spare part or for accessories the answer was to go to the local dealer... Thx Lance

thx, yes I meant the bipod folded. What metal ring? can you make a picture of the pin with the metal ring, cause I think there is no metal ring at mine. Lance

hi somegirls, is this rust on the screw and the long pin holding the dustcover in this picture here? Lance

Hi, when I attach the bipod to the metalframe under the barrel, there is still enough room for the bipod to woble from side to side a bit, is this normal? And the pin which fixes upper and lower together gets loose very easily, so I am afraid to loose it in the field. thx Lance

One question, does the burst-mode always work with your M93? It doesn't with mine, sometimes the gun shoots full auto although the selector is at burst... Thx Lance

Hi, when you look at the KWA-USA-Website at the M93R: http://www.kwausa.com/products_m93r_ns2.html they also say: Slide Material = Metal Alloy Frame Material = Composite Polymer (plastic ) Outer Barrel = High Impact Polymer (plastic ) So if you have one with a metal barrel and -frame, I would like to know where you have it from. thx Lance

Hi, you must have a different version than I have, because the KWA M93R NS2 that I have, has only a metal slide and the folding foregrip is made from steel, the rest (frame, barrel etc. is plastic). Nevertheless I like the gun also very much. If you understand german you can read my review here: KWA M93R at vabok Lance

It is in stock at RSOV now, but only in dark earth: MagPul PTS ACR Lance

Any hint how to "properly setup" this thing? thx lance

I was wrong and Ed-Skar was right, there is a railmount in the package. So I think I will use this new elcan spectre dr clone from EB. I also bought a original SA80 sling... but there must be better slings for this, what sling is used in this review? thx Lance

No, I think only the starter releases came with the additional rail... Lance

Ok, thx for the answer, I ordered it. What I like to know from the owners is, if I better install a susat (is the acm produkt ok?) or a rail with some other optic not in the terms of looks but in the terms of usability. Lance

Hi, I am thinking about buying one, can it take 11,1 V Lipos out oft the box? Thx lance