PoleCat

Well mine wont zero in, it moves perfectly up and down, but not down as much as it needs to, im wondering if im gona open up the scope and try to fix it, or just leave it be, now its pretty useless.

EOL, i have almost the same setup, il post pictures later on, only diffrence is that i have battle axe wood kit. But i have a question about the scope, you have the same scope as I, but mine wont zero in, its aiming like 4 scope dots to high, so i have to use the lowest dot in the scope. You know how to zero in that perticular scope ?, on real POSP scopes you can loosen some screwes and thus zero the scope. But on this replica, those arent there, so how do i do that ? its really frustrating. Are yours the same ?

I kind of solved 2 problems. It wasnt that the nozzle got stuck, it just looked that way, the problem was that the nozzle got pretty far out of the BC that it shifted upwards, and the sharp edge from the nozzle's back (im using a NPAS, and its the edge of plastic nozzle not the NPAS), got caught on the bottom edge of the BC making it unable to go back into the BC once cycled. This was solved by sandpaper that edge down and bending out the bottom in the whole of the BC (apperently when firing with another Bolt catch unit, it was sitting a little high, and thus bending that part of the a

Yea it cycles lovely without the magazine in. Might give shaving the mag catch a thought. But ive also thought about it, if i cycle it manually both fast and slow i cant seem to get the result that the nozzle stays and the boltcarrier goes back, but i guess i cant replicate what happens when gas is used and what forces are in play. The full alu nozzle came with a plastic lock plate, i think thats kinda stupid, any idea where to find a metal one ? also it doesnt seem to work very well, im gona go back to the plastic nozzle until ive sorted out this issue.

Hey guys, im gona ask for your help on a mather, and in return il show you a picture of my setup. Problem: The nozzle gets stuck in the front while the BC cycles backwards thus breaking the plastic bit that holdes the nozzle from going out of the BC. I have 2 possible explanations to why it does this. First, if i cycle manually, theres quite a bit of resistance to get the BCG into place, its really tight fit over the magazine, if id guess its like 2-3 mm to tight. Second, its because ive changed the upper to a Vltor upper from AABB/G&P dont remember the brand. I didnt have this p

http://www.px-airsoft.com/index.do Ive ordered from them from time to time, they are really fast. but not the same quantity of products as EBB. I'm sure there are plenty of other web shops for WA parts.

@ratio Well first of the thickness of the front attachment ring, is much smaller than the agm, thus making the whole on the lower reciever alot bigger, so i had to manufacture some sort of spacers, im not quite happy with the result yet, im gona look into something rubberish instead. but its not that big of a issue. the attachment ring on the back of the upper was also not shaped to fit the agm lower, so i hade to file that ring down quite a bit, until it fit as i wanted it to. one thing that cost me just time, and a small amount of money, was that the hopup "housing" ? dont relly

Finally got mine to work exceptionally well: Kitlist: AGM M4 RIS GBBR 5ku Outer barrel 5ku Hopup unit NoName Hopup housing G&P hopup rubber 5ku Bolt carrier 5ku NPAS Element RA-Tech clone Nozzle G&P Vltor Upper Reciever G&P Acog red-dot Dboy flip-up rear sight NoName G27 grip NoName short front grip AGM Magazine I had a lot of problems on the way, the original AGM nozzle gave me trouble when using the NPAS and the G&P Vltor upper (the upper was tricky to install in the original AGM lower aswell). Overall the gun now perfo

I've solved my problem, atleast one, and that is the gas venting. i realized that the upper wasnt properly aligned with the lower, well... basicly the the the nozzle didnt puick up the BB correctly, instead it crashed into the thing that holds the bb on the mag (just a tiny bit thou) and thus ludged the BB into the wrong place. I alligned it better with some filing and spacers on the front pin, and now it works. thanks for the respons.

Im using the standard AGM recoil spring, and buffertube, the one that came with the gun. the spring is actually a good idea, some round spacers could also work, but as it fires ,and damn accurate i might add, atm i need to make sure that its the problem, if i push the hopupunit further into the upper, it might break the nozzle if it comes in contact with it way to soon. il try to switch back to the regular AGM bolt carrier, to see if its the fast cycle or maybe it doesnt fit as well as it should.

Internally i have installed a 5ku CNC hopup, using the old parts of the AGM. ive changed outer barrel to a 5ku WA style, as i have a G&P WA Vltor Upper. Im also using a 5ku Vltor alu Carrier, with the 5ku NPAS and the original AGM nozzle. im gona try the G&G 0.25 wich is the ones i will be using in the summer. currently looks like this: I hope i can eliminate the problem, one concern of mine is that the Hop UP unit is too far into the outer barrel so the space for the nozzle to pickup the BB is to long before it reaches the hopup unit. But i dont fully under

yea im using G&G .20g i shot 2-3 mags yesterday, and it didnt jam once. so it seems like its just bad luck, but should be able to avoid it somehow

Anyone else had problems with BB's dont manage to load into the gun quickly enough ? Im using the 5ku alu Bolt Carrier, and yesterday i shot some shots of on single fire and after a couple of rounds the bb got stuck between the hopup chamber and the nozzle. its like the mag doesnt have the speed to load a BB in the time the BCG cycles. But it could maybe be that the hopup chamber is too far back into the outter barrel ? anyway, when this happens, it vents all gas from the mag, wich is kinda annoying to say the least.

Well, alot better than a plastic one, thats for sure. RA-tech one could be a good alternative, but its not really a cheap alterantive, and it is said to only fit their own Bolt Carrier

Id say: once this is available for sale (mid december is what i heard): http://www.ebairsoft.com/aabb-aluminum-loa...ure-p-2635.html Then you pair that with the heaviest aluminium bolt carrier or a good steel one. BC seems there is plenty of, but aluminium nozzles is hard to come by.

@Jhonny2400 Some quick answers: I bought this replacement hopup: http://www.ebairsoft.com/aluminum-chamber-p-2300.html It fixed all my problems of dripping BB's (just use the the leaver arm and the rubber, and also the barrel from the AGM). to fix mags, all you really have to do, is take them apart, soak the o-rings in silicon oil, then reassemble the mags, and always store them with gas in them.

Well i can do a compare, but in general i find myself thinking "isnt the mag empty yet ?". so in overall its better gas efficiency, but how much i cant tell without doing a full comparison. Donno why the movie is out of sync, its in sync on my computer so im guessing youtube screwed it up.

Heres my movie guys, http://www.youtube.com/watch?v=IEcchRqdfd8...e=youtube_gdata apologize about the quality of the content in the movie, but i was in a hurry and wanted to get it up today. One thing ive noticed are that the bolt catch works really well now, with the lighter BC, before it never ever catched, i could fire for days without it catching the bolt. Now thou, with the lighter 5ku carrier, it catches like every second cycle, as you see in the movie. i really like this BC, i think its great. in it you can also see a small glimsk of my clone NPAS, it workes gre

Ive got some big troubles related to the delta rings and barrels and uppers. Delta rings 1 stock AGM deltaring wich has bad threading. 1 Dboys deltaring (i think its for AEG, but that shouldnt mather in my eyes) that is brand new. Uppers 2x AGM original uppers, both with bad threadings. 1x WA M4 Vltor upper, its brand new. Barrels 1x Stock AGM barrel Now to the problem (il explain as well as i can, if it doesnt make sense, il try posting a video instead): On the 2x stock AGM uppers, the Dboys delta ring fit perfectly, but the ring tha

@mental medic sure i could make a video real quick of my current setup. the aluminium nozzle isnt available to buy yet on ebairsoft, sadly. il post it tonight.

ye very duster-friendly. I will go with the aluminium nozzle once its available on ebairsoft. so that will give it some little extra weight(not much) and would probably last a fair while.

I got mine today. I installed the original AGM nozzle into it. I testfired it on single fire, and wow, you can really feel that its way lighter. the quality seems really really nice. the ROF is as expected with a aluminium carrier(high) I think this setup is way more friendly to the internals. But i personally think it was more fun to fire the more heavier BC. Optimal would be a heavier recoil while the rof and speed is still there.

hum true, it might work, i thought it was a solid piece, but they just flipped it so i didnt see the pins that holds the npas in place. yea defenetly gona get one of those, whenever they are on sale

Yea its part #1 im refering to... Was saying that this: http://www.ebairsoft.com/aabb-aluminum-loa...ure-p-2635.html Does not work with the NPAS. Ok thats very intreresting, i will defenetly try to find one of those replacement AGM ones. you know where to find one ?

Actually any nozzle is fine by me as long as its compatible with the NPAS, the thing im looking for is durability. AGM one broke, at the back so purchasing a new AGM nozzle might not be my first choice, the "alu" one att Ebairsoft looks promesing but doesnt seem to be a NPS. So im torn between what nozzle to get.