Jump to content

stickyittoyou

Regular Poster
  • Content Count

    262
  • Joined

  • Last visited

Everything posted by stickyittoyou

  1. If anyone is interested I have a link to my sale page in my signature.
  2. I regret to inform you all that I must give up my KJW M4 CQB rifle... I've come to this decision because I am going through money issues, and I need to pay bills off.
  3. http://www.youtube.com/watch?v=XmXq7LYGc30&playnext=1&videos=Vco-EMh_I-M&feature=sub Hey T_Hum... have you watched this yet? Let's just say this should help your sales
  4. Remember guys that there is a new receiver that will be available. This probably means they are doing a BIT of remodeling on parts; this would mean that new parts are being replaced with newer versions and are no longer being stocked; and produced... Wait it out guys... wait it out. Either that or you're not getting any compression Donut... Is your BCG even actuating? Must be stuck closed then; if it didn't have the rubber band above the BCG the piston cup, the rest of the bolt would extend too far from the cup; This is what causes most problems with the cup being chipped on either si
  5. i mean the small plastic loaders that you click to load fast; If you hold your thumb in the right spot you can do it.
  6. I have to skirmish on 1 mag tomorrow. hahaha This is why I carry 3 speed loaders that are full. Going to be weird having to be precise on my shots; it'll make for good training
  7. I use an ATN Ultra Sight; it's pricey... lol 200 when I bought it, but I think Walmart has it on sale for 130 now.
  8. You're worrying too much. Mine came in fine...
  9. It's not that bad up here... lol, it's only in the 80's. Not going to be muggy this week; so it's prime time to play Airsoft.
  10. Where did you buy it from? I got mine off of Ehobbyasia; took it 5 to 6 days to get to my doorstep. 3 day shipping through USPS; about 3-4 days in Customs; just wait until tonight for a tracking update... because they don't update the tracking numbers until almost midnight.
  11. No what he meant was lubricating the piston with say... vasoline or another lubricant that is thick, once you fire it the lubricant will fly off of the piston and go down barrel. This is why I use Liquid Wrench Silicone Spray (it's thin; and not thick like other lubricants), it's what I clean the barrel with and put into my magazine as a propane additive. I haven't had issues what so ever with my hop-up. I although need to get .28 or greater for BB's since all I have is .20's so I tend to have fliers, other then the fliers though it shoots where I want it. P.S. Even on a real steel gun aft
  12. Did you not use thread lock?
  13. Nah... mine was there for a couple days as well... passed with flying colors.
  14. okay sorry, messed up then NOT READY to be sold yet;but He's making one obviously... since he changed the FPS on the NPAS like on WA style GBB's.
  15. NPAS Kit is available through RA-Tech now. http://www.youtube.com/watch?v=h_xxdGfONjQ&playnext_from=TL&videos=TCEtjLJ3-7Y&feature=sub
  16. NPAS Kit is available through RA-Tech now. http://www.youtube.com/watch?v=h_xxdGfONjQ&playnext_from=TL&videos=TCEtjLJ3-7Y&feature=sub
  17. Trust me, I have a 323 - 6.01mm barrel; and that was made by T_Hum... Most likely the stock barrel is around 6.03-6.05mm.
  18. The hop up is made of 5 pieces. The hop-up rubber, Barrel, 2 Metal pieces that clamp over the rubber and barrel, and then a brass ring that goes over the 2 metal pieces. It's so much more easier than AEG hop-up units. Just make sure after its all together that when you press down on the rubber that the nub on the inside is straight with the barrel.
  19. Let's not speculate... something as of this could spark a rumor; and which is not true. So let's keep this sort of stuff down. Simple Questions - Like "Are Magazines still available anywhere?" is fine... but a Question like "Was production cut?" will cause some people to speculate and go for the worse deals AKA- WE, INOKATSU, WA, G&P.
  20. I would say the easy way would be to unscrew the end cap of the butt stock and then take the screw driver and push the buffer forward.
  21. Ooooooooooooo DAMN! POOPSTANIA! ME LIKEY!
  22. Was there a picture? What page is it on?
  23. You've come to the right place
  24. Sorry it's rather dark... I decided to take off the EASY-MAG holder because I'm afraid that it'll be too abrasive, and break the front pin mounts... plus it was cutting into the paintjob! Also I had to tighten up the buffer tube, there was a slight wobble to it. Other then that it is rock solid now (EDIT) Whomever was wondering if the sling mount would work on the other models... it's a yes. It's a drop on piece to replace the original back plate. As for a part number.... my manual is only M4 Specific. Doesn't go into multiple models.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.