AG1212

Recoil kit? What a novel way to make money!

Kewl, I will probably end up selling it for more than I paid anyways Best way to do airsoft; buy broken guns or bits or really good deals and make enough selling them to buy a different gun each month.

And when did these problems occur? I am buying one of these second-hand and apparently it's in ''perfect condition''. I just want to know at which round count I should be concerned.

Sound, just PM me your address and I'll post it over to you Thanks again.

Sound I think I might just send it to you then, whenever suits you best. But I warn you, it's in a state and not all due to my hand! It definitely needs new part no. 9 (the posts for the nozzle springs have been removed somehow/for some reason by the previous owner. It also had numerous other issues, probably due to not having nozzle-return springs (which I will supply). Thanks a lot!

Well I really appreciate the offer, but I'd rather not go through the hassle of postage etc. Unless you feel like keeping it for a certain sum of money? (or is this against forum rules?)

OR, you could please help me fix it and change my mind

Ugh FML. After hours of trying to get the bloody bolt pins out, turns out my MP9 doesn't want to fire. The trigger doesn't engage the hammer. I have to push the dis-connector forward for it to fire. I fired about a mag through it, semi and bursts. How do I fix this PITA POS MP9? I'm just going to sell the two of them methinks and go for a nice spring action, nothing can go with spring powered rifles, right? RIGHT?

Please let it be 20rd mags! Or normal looking mags, or PMAGs

Inari, where did you order yours from? And how much did it cost including taxes (if you had to pay)? What happened to that import ban they were implementing...

Thoughts on the NPO AEGs? Are they worth the ridiculous price-tag? If I could fit some sort of GBB system into one of those...

I don't think we get Duster over here, to import it from the UK would be pricey AFAIK. As for breakages, as tooler said, there are several in the country without any reported failures.

Well I'm replacing my rubber eventually anyway, but you're right. Did some testing again today. First semi and burst fire towards the end: all mags fired flawlessly (Well not flawlessly, there was one failure to lock-back, but that's not that big a deal) apart from mag C, which also stopped leaking after leaving it over-night filled with gas. I got double and triple feeding during full auto, IE it would stop spitting out bbs then suddenly 2-3 would come out instantaneously, with some bbs rolling out the front. This only happened with this one mag, it was also low on gas at the time.

AIrsofteire and airsoftguns.ie both sell 144a (same as 134a), but it's a wee bit pricey at 13 a bottle (without postage).

Update: Magazine A: Works 100% Magazine B: Works 99%, failure to lock back during full auto burst, locked back when firing recommenced. Magazine C: Was leaking and not feeding properly. Striped down, sprayed in silicon oil, lubed part no.143, sanded 137 and lubed with silicon oil, as well as the channel. Wiped it mostly dry. Works 99%, still leaks. Magazine D: Didn't feed. Did same as above bar sanding the follower, works 99%, one missfire. Magazine E: Didn't feed. Just took apart and did nothing to it as a control. Works 100% The only remaining issues I have with the magazines are

Thanks for the advice, I'll try it all out. The odd thing is that sometimes one mag works 100%, then fails to feed at the end. Most failures occur when the mag starts to run out of gas: the bolt becomes sluggish, and stops sending bbs out the barrel, instead they get stuck in the rubber till enough of them force their way through and the remainder roll out the barrel. Then the mag stops feeding altogether but still cycles the bolt, eventually it runs out of gas, the bolt gets stuck and vents the remaining gas. With one of the mags the last 6 bbs got physically jammed in the feed-tube thin

oops

Over hopping .28s? Well I'm glad mine isn't doing that. The one that works has a decent trajectory. I also managed to get 2 out of 5 mags to work by lubing the follower. Only problem is that if I fire too fast they miss-feed, I have no idea why. EDIT: Is this any good? Anything else aside from rubbers and springs that are worth getting?

Thanks for the link. I tried a cheaper brand of BBs and ironically the feed a little better. One of the mags is 100% now, the rest still don't feed from time to time though. When I load up the BBs and let the follower go up, sometimes it moves very slowly as if it's moving through heaps of grease or something. I am getting so fed up with airsoft at this stage, my 50e POS DE shotgun is working 100% to this day, and my TM Glock is still working despite the front of the slide being cracked from green gas. I must be one of the unluckiest guys in airsoft Anywho, I'll soak the rubbe

Got some gas today, so far not so good: the gun doesn't load a bb into the chamber from time to time, I think either I am leaving gaps between the bbs or the follower is getting stuck. The latter seems more likely due to it not locking back from time to time, but that might be due to cool-down. Also when in auto, the bolt doesn't lock back, I have to stop firing my burst then fire again for it to lock. This may be due to sticky followers or gas cooldown, not sure. One of the mags is leaking anyway, are they easy to take apart? Don't see any screws or pins. Update: When the mag stops fe

Well I'll give the latter a go if the former doesn't work out. Thanks. As a side note, electrical tape is your friend! 2 layers made the stock as solid as it will ever be, and 1 small layer on the barrel reduced wobble on the silencer by like 90%

Yikes, and I just put the thing back together Thanks for the help! Only remaining issue is that the bolt won't go fully forward until the hammer is released, I suspect the hop rubber is swollen :/ Think I'll give the Falcon rubber a chance.

Well I'll find out about the nozzle soon enough. The problem is that I have the railed version, going to be a PITA. Also, for the third time, receiver wobble normal yes or no? Thanks. If I keep these I think I might find a way to get an M4 stock tube on it....

Thanks guys. What about play between the upper and lower receiver? Also one of the MP9s came without nozzle springs...(second hand), don't have any gas to see if it can even fire without them. On the same MP9, there is WAY too much play on the barrel, the posts that the bolt/barrel assembly slots into has a lot of up and down movement :/ How is it attached? I saw no screws.

Just got mine Question time: is the stock and magazine supposed to wobble? The silencer I got with it also wobbles. Also, does anyone else have play between the upper and lower receiver? Thanks.