AG1212

Took it apart just there, as far as I could get it, I didn't notice any o-rings in the first place. I think maybe the valve spring isn't strong enough, I'm going to try it replacing it.

My mag is leaking out of the fill-valve. Not around the edges, but from the little nozzle itself, like it isn't closing properly after filling. I've taken the mag apart and lubed it, still no luck. Is there anyway to fix it?

That orange/red tip makes me want to cry..

Bit of an update: One mag spontaneously decided to leak after I filled it with gas, will probably just have to take it down, oil the valve and o-ring and it'll be back to normal. A more worrying development is that when cocking the rifle whilst on FA, the trigger won't engage and drop the hammer, I have to switch to Semi or Safe and back again for it to engage. I've noticed that the trigger goes marginally a bit farther forward when cocking on FA than on Semi. Anyone else experience this?

Haha yes indeed! Tend to hurt a bit more too in my experience, the extra mass must conserve more energy over distance.

Had a wee go at FA there just to reconfirm. 3 round bursts are OK, pointless if not wasteful really, but OK. Anything beyond that is just suppressing fire, more so due to the noise off of it than actual rounds on target Well I'm going to skirmish with this on the weekend, up against all kinds of spray-and-prayers. Now if only I can convince my team to go GBBR only, imagine all the money I can save if we all chip in for 20 or so mags...

Really?? That's terrible Oh well, not much I can do about it, I need NPAS. But I wouldn't really use FA regardless with only 30-round per mag and recoil to contend with.

Now, the WE G39c may be the exception, but why does this company get some much hate? This thing is amazing! Efficiency: loaded up my 4 mags with gas and every day I expended them once for testing and adjusting hop/scope etc to get it perfect. Lasted 3 days, so 3 fills of bbs per mag apart from one which failed to fire the last bb in mag no. 3 Some still have gas left, I might even be able to go to 4! And the temp is between 10 and 15 degrees celsius. I even used it in the snow a while back. Accuracy and range: NPAS tuned to around 328 FPS with a .2 at 15-20 degrees celsius. At approx

Thanks

Any good places to get some FG ATACS in the EU? Thanks.

Haha, true enough Think I'll go for the polymer version though, save a bit of dosh for mags (and maybe a real eotech...)

Is it a little insane to buy a ''real-steel'' 150e hand-guard for an airsoft replica? Those hand-guards are exactly what I want/need. A bit risky though, might not fit at all (and the rails that come with the G39c might not fit it).

Thanks

WE G39c, inspired in part by TerranCmdr http://i.imgur.com/tFonELR.jpg

WE G39c: http://i.imgur.com/tFonELR.jpg

WE G39c: http://i.imgur.com/tFonELR.jpg

Indeed, I think it's the most aesthetically appealing cut to possibly make, sanding certainly helps in that department. Updated picture: http://i.imgur.com/tFonELR.jpg

Hmm, I might as well give it a go, and it's not too expensive to replace if I mess it up. Cheers! Will update with pics, hopefully it won't look too silly if I make it a wee bit longer (to make room for my 3x magnifier). ------------------------------------------------------------------- Before: http://i.imgur.com/jvsHsID.jpg After (excuse the crappy pics): http://i.imgur.com/I51YWGf.jpg, http://i.imgur.com/xK8bWzV.jpg A little rough and in need of some sanding, but I think it looks good enough. Thanks TerranCmdr

Does anyone know where I can get a replica of the KAC split top rail with built-in iron-sights? Like this: Thanks

550-650e I'd say, well that's what I'd sell it for.

What tool is needed to tighten the barrelnut? My barrel is getting rather wobbly.

Fantastic

What's the lowest FPS I can get using NPAS and a K-length barrel?

This thing is a beast O_o Anyone know if this will fit? Don't shoot me I just prefer M4 stocks.

oops