Rob15

Nope, it clocks in at over 300fps on green so no need for the hammer spring, assuming it would even fit of course.

Guarder TM Sig P226 recoil spring will work, i got one for mine but foolishly cut it down because i thought it was too long and stopping the slide lock working, turned out it was the mag. Get one of those, stick it in and leave it and enjoy the awe inspiringly fast cycle rate it'll give you

I am also running propane in my TK USP which is stock, if you look at the slide design the front of it isn't going to snap off anytime soon

2 of me from SYA Proteus today...

Usually its just the currency convertor on the left that makes it appear to refresh...or at least thats the case with me.

Me also at SYA Proteus on the 31st

Clone of the G&G RIS then Is it all metal or plastic?

Very nice, G&G RIS?

Yes, a few people have put SD front ends on MC51s to replicate G3 SBS models, won't be any different for other G3s.

That is a very good price, when i was looking around for those scopes i found that just the mount base without the scope ran into $80 - $120 alone!

Does it click into place properly though? I've found TM selectors too flimsy to click properly.

CA selectors don't work properly with the G&G lower, nor do TM :/ The Elcan is a guarder replica, it was about £70/$140 The waffle king arms highcaps and standards are by all accounts far better than TM and CA mags, their plastic mids aren't as good as that though.

My 4 main AEGs Stock TM MC51 <3 MC51 and my rather modded ICS V4 SD3

Some more pictures

Got it from firesupport, WGC also have them if you're not in the UK Yep, thats the one, it'll fit TM G3s/MC51s, CA G3s and MC51 type things and JG G3s too and its much better than the 2 part reciever and grip set up., just beware the selectors don't always work with the G&G lower. Aye, my eye needs to be about 6 inches away to see through it clearly. Its a replica of a real scope and mount anyway so if that position is good enough for real military forces then it must work I'd hardly call it tiny either, its nearly as big and bulky as the elcan

New scopage

New scopage

Its a good job i don't and won't need any help with it then Erm no, it IS pot metal. KWA has always used pot metal (zinc/alu mix iirc) on their stock metal slides, its strong enough for GBBs but its no where near as good as a CNC slide. Also, how many times are you going to get steel mixed up with magnesium, alu, pot metal etc and be told you're wrong before you learn?

i'd say what i put in there but i know you'd give me a lecture on how i'm not using custom machined titanium gearsets and nuclear motors etc so i won't bother. I'm perfectly happy with 670rpm, i could get more out of it but i don't want to because i don't want any high rof AEGs. Probably, its my sisters old (about 5 years old) camera so its a bit dodgy.

Well i was a bit unsure about UMPs before, but now they are a new love of mine <3 My DE UMP which has had a ftk and new hopup rubber and bucking fitted, hits around 300fps at 670rpm

Nothing but 240 sounds about right for 134a on a cold day, i never thought it cycled that well on 134a though as it was a bit slow (probably due to the weight of the slide!) Green gas really releases the beast inside it.

Only 240fps? My TK clocks in at 300 - 330 with .2s Frame is glass fiber iirc like the real one, hence it feeling like win.

You can use whichever you want.

Its a PSG-1 Mag Should fit and feed fine in any CA G3, TM mags certainly work fine in my CA