Eliminator

Maximum 55rounds

it's on the Wiki

Not recommended as well for nozzle fitted with the 300fps floating valve and brass nozzle? For those who wish to test your BBs is there anything to pay?

Wetti I recently bough a lower receiver from AB and all the fake pins are missing....Top of that, the takedown pin hole is way too tight(nearly 2mm in diameter...) Do you know who is the manufacturer? About the BBs do you have any pricing infos?

Et c'est du bon?

Any pricing informations?(especially for the 0.28g)

Wetti I just saw on Airsoft news that WE will launch a large batch of BBs (every grammage)for the GBBs very soon...any info of these BBs? Have they been tested on the M4?

As previously said, there are nearly 50% of the guns working OOB and the remaining 50% that need some fixes. A team mate who brought his at the Belgium retailer got a Gen 3 gun(without markings) wich works fine in its "very own" configuration. I explain what I mean: The guy did not know how to set up the hop up, and his Bolt Catch did not works when firing. Ok I said I'm gonna take a look at this. For the hop up, no problem, it was set pretty high, so I lowered the set and the 0.20 BB he used flew nearly 60meters away. So 1st "fix" wich was only a set up. Now the Bolt Catch(steel version)I too

70°F?how much °C?

How many mags did you shot?

I just come back home from a French major OP. he hop rubber seems to be very soft material....Before the OP I was able to see the 2 lips of the rubber. After nearly 50 mags in 3 fays, it becomes barely visible...and, every day began like the previous one...setting the hop one more step up on the 1st mag...without doing this, the BBs falls after only betwin 3 and 15meters...After this initial mag, thing seem to sort out, since the gun become a bit more accurate, but there are BBs flying to the sky...

Personally, I carry 7 mags: one engaged and the 6 remaining in the mag pouches

I guess Green Gas can be available almost at every UK's airsoft retailer

60-70 shots from what I readed somewhere, wich is less than the regular gas mags, wich shots 4 mags full of BBs(33) with one fill

Just a suggestion:maybe schould you buy a new trigger group? it costs $45. Beside this, I have an issue with a trigger unit too(the original one in fact)with the hammer at rest, I'm still able to put the selector in the AUTO position...Another surprizing issue: a team mate recently bought an M4 from a Belgian retailer(I guess his gun is a Gen3 because of the hop up wich seems to be a V2 when looking trough the barell). His gun has a Bolt Catch issue. I tested it by putting on my upper and the BC works fine, either with my mags and his...but the more surprising thing is that when I try to

Oh ok...If any third party producer's here...you got a market fot the Mags!

The Magpul magazines are very interresting! Where to buy them?(I'm looking forward to build up a full Magpul custom around my M4, with MOE Stock and Handguard and MIAD grip with a CR123 Core)

Easy! take a Graphics Card adaptator and cut it at 3mm and you'll get a nice and stable power reductor(simply screw it on the rod)

Nice receiver! Are any other sheduled? I would like a Novesque or a Bushmaster or a Troy...

I have an ACM Aimpoint M2 and it simply turned off... for tune the power down I use the nuts that are on the Graphics Cards adapters and cut and sand it until I have the right power

Here is my temporary fix(could be a definitive one as well but the gun will be in SEMI only) Sorry about the quality, I took that pic with my phone's camera(at least you can see the part of steel I used...) The hole diameter is 4mm

The problem is that's a temporary fix for the broken part#59. Mine lost both legs. Despite not being able to shoot in automatic mode, the Semi works pretty well.

Small edit about my part#59 fix: it works in semi mode only...

Hey I just found a fix wich seems to works pretty well Take a metal sheet(I used one from a paint brush set, the thing to clean the roll) cut in it a 16 x 12mm part and use the rear of the part wich is under the cover to trace where to drill the hole. Next, drill the hole(I drilled a 4mm hole) and put the new part in the place of the legs of part 59, but keep the rest(the cover as...cover)

That's I'm actually doing. I got one set at 280fps and one at 400. But for now my gun is out of service, waiting for a new part#59 wich is on the way...