steaktipz

Just found out on mine that the charging handle (the part that swings out sideways) can be locked to the left or right by rotating it outwards, and then pushing it in perpendicular to the bore. No real use, but points for realism.

Does it take a standard AEG piston?

Did it come with a black flash hider? Or did you find an after market CW one?

My SRC G36 with a few CA/JG parts and Star mid caps I almost wish I wasn't selling it. . .but I want the new Ares G36!

To get it started: My launcher! Made out of PVC bits and a few pins and screws. Shoots M203 shells, I can also use it to launch smokes using a bit of paper for wadding and the gas from the shells. To load, just pull the clevis pin back, rotate it down, and extend the barrel. The grenade is then inserted into the inner PVC pipe. Once that's done, push the barrel back in so that the grenade is right against the "firing pin" (the screw and the nut), and pull it backwards. Once shooting is done, extend the barrel, turn the launcher over, and let the grenade fa

Seriously? Come on. This thread is specifically for homemade LAUNCHERS. Just because the first thing on the thread happened to be a launcher doesn't make that thread the same thing as this one. I don't wanna see any AKs, M16s, snipers, or pistols. Just launchers.

Let's see your homemade launchers! All launchers in this thread must be made from scratch; NO off the shelf launchers. Should it be gas powered or spring, shoot m203 shells or rubber slugs, be pretty or ugly, post pictures of it here!

Folded Unfolded In Holster Loose lever pins One more beauty shot:)

I picked up a KSC Folding Stock for my KWA 93r a while back, and figured I'd do a quick little review for anyone looking into buying one of these things. Purchasing: I ordered the stock from evike. It costs $30 there, which is a pretty good price, considering that I've seen it for $60 at other places. Wasn't actually in stock when I ordered it, so they sent it as soon as it was back in stock. KSC M93r Stock First Impressions: When I first received the stock, it came in a plain white cardboard box. The cardboard used was pretty thin, and I don't think it offered too much pr

That looks really great. It's shame my JG AUG is a piece of ###### and has to go. I should have gone with marui. ): Also, not to be a nerd, but the only version in MW2 is the A2, the scoped version(if you look closely) is just the A2 with some weird scope/mount combo mounted on the rail that looks like the A1 scope.

That looks really great. It's shame my JG AUG is a piece of ###### and has to go. I should have gone with marui. ): Also, not to be a nerd, but the only version in MW2 is the A2, the scoped version(if you look closely) is just the A2 with some weird scope/mount combo mounted on the rail that looks like the A1 scope.

I'd been looking around for decent midcaps for my AK74u at a reasonable price, as well as having a somewhat unique feel. I did some research and narrowed my choices down to 3: -KA AK midcaps -TM AK lowcaps -MAG AK midcaps I had heard that KA midcaps are so horrible that they require modding right out of the box, TM lowcaps are ridiculously expensive for midcaps (in my opinion; I know, I know you get what you pay for) and I certainly didn't waht to spend $125 for 5 mags and only 350 shots, so that left me with the MAG midcaps. I want to take a little detour here, and just

Yep, I had a SRC g36c a while back, sold it, missed it, and now I'm almost ready to buy a new SRC g36kv! And about the spring guide, I also realized that it was advertised as metal and came with a plastic one, so Airsoft GI sent me a free metal spring guide, with bearings! Awesome review, I thouroughly agree with everything stated in the review, EXCEPT the piston. My G36c came with a total ###### green piston that stripped after about 200 shots after I installed a modify sp110 spring, so G36 buyers beware!(this piston is also included in the GEN III models, so be careful) -AWESOME REVI

hey, awesome review! Do you know if it comes with metal bushings? Thanks!