Jump to content

Batmause

Regular Poster
  • Content Count

    302
  • Joined

  • Last visited

  • Days Won

    11

Everything posted by Batmause

  1. Somebody know the o-ring sizes which are used in the gas cylinder? There is two o-rings which seal in the two end of cylinder. Front is around ID 9mm with 2mm thickness, and the back o-ring which is on the valve is around ID 10 or ID11? And other o-ring which are seal on the valve at front-middle position.
  2. WiiTech also released a lot parts for WE P90. You're able to buying the parts separately and the build quality is always good from WiiTech. http://www.wiitech.com.hk/product-list.shtml?path=57_150
  3. They are ok. I ordered items from this shop on their webshop and on eBay too. I got, what I ordered.
  4. That nozzle spring is really weak. If your have much more stronger nozzle springs the nozzle will going backward fully and that help on the feeding issues. When you had jams then the nozzle movement was not good, it was in half position, a bit backward as the feeding lip is. I think that cause your issue. Modification of feeding lip helps a bit but if you can unload the BB easier then it not your problem...
  5. http://www.kyairsoft.com/ or try on WGCshop.com.
  6. http://gunfire.pl/product-eng-1152209273-G74A-GBBR-subcarbine-replica.html?product=1152209273 Cheap copy from the Well. One of my friend have this one, it is looks to be the same as the WE AKs74UN is. It has the following steel parts: receiver, front-set holder, stock, dust cover, hammer, sear, fire-pin. The lower has an addictional buffer. The first test, results seem to be good. The build quality is much better as the Army's G36 copy has - much, much better....
  7. Army R36 is a copy of WE G39 but it is copy of first generation G39s. It has not reinforcement in the hammer, firepin-locker. The magazine tightened by two pin not with screw. The nozzle spring also weak as the G39 has. If you get double-feed then you nozzle and hopup chamber will damage. t is cheap for parts and for basic gun if you want to upgrade it but this build quality and the inner quality is much worst.
  8. I know this feelings. My teamnate tried to put the magazine "with reversed side" into my Marui SCAR-L. After the finished attempt the bolt catch parts broke appart so I try to find replacement for month without any good results.
  9. Chinese copy arrived? http://www.asiaairsoft.com/index_eproduct_view.php?products_id=7467
  10. This year I ordered a backpack and some replacement parts for WE G39. I got the package without any problem.
  11. I saw it on other webshops too - tiger111hk, asiaairsoft, etc.
  12. Last weekend we made a comparision video about using 2nd gen VFC magazine or GHK G5 magazine. There are a few guns but you can see the difference when we use two HK416.
  13. - The VF416 has a bit slow ROF I think. - I polished the bolt carrier's outer and the upper receiver's inner surface and the ROF raised a bit. If you have time then do the same on the piston/nozzle area too - BC's inner surface. - Currently I ordered a few buffer and buffer spring to test which setup is the best for my gun. If I used to strong buffer spring I got cycling problems - the bolt catch won't work perfectly. - I got good experiences with VFC high speed buffer with King Arms rubber-spacer (medium sized). I tried the VFC's buffer with the original addictional spacer (aluminium one)
  14. - The previous model also had steel internals - the trigger was made of "monkey metal". The FCG (except trigger) - bolt catch - bolt catch holder/locker - valve kocker & locker was made from steel. The bolt carrier has a steel insert as reinforcment at the bolt catch's contact area which do it really long-lasting. The internals are really good out-of-box. - The older magazine had the same upper design with copy of RS-like feeding lip, they are/was really tight also - on my gun had the same problem but currently I use it with GHK G5 magazines so this problem was solved.
  15. Batmause

    WE P226 R

    Somebody tried WE P226 magazine in TM/Guarder P226? How perform WE's mag in Marui?
  16. What about cooldown effect? I have bad experiences with the stock magazine compared to GHK's magazine. Anybody tried to compare them? I saw a few video about G&P's PMag and it was really likable but more expensive than GHK's magazines. The latest magazine seems to be good but it isn't released yet.
  17. I have a GHK PDW too so I don't want to spend money to buy magazines again. When I made my decision to buy a VFC HK416 then I read really bad reviews about VFC's magazine. When I got my gun then I check my gun and magazine - it's not a good design I think. I read that it much better to buy G&P PMAGs if you won't modificate your gun to use WA-system magazines. One replacement fire pin is around 6-8 bucks so it's not to much for a short try.
  18. Mine is the same with Azimuth valve. I started to test mine with powerup silencer to do a bit powerful gun to woodland. There is a lot problems with the nozzle guide. Just use a bit screw locker or locktite to fix it - just use a very few. Point is to be easy to break the glue when you want to disassembly your BCG. I think RA-Tech valve's is really unstable and easy to break. I made a shooting video with the stock magazine and GHK G5 to compare them - on my own language. The VFC magazine was used on much better temperature but work much worst then GHK G5.
  19. I'll do the VSR-mod on it, that will be the 3rd thing which I'll do. I was hoping that VFC has enough brain to change the hopup system to VSR-compatible. They can do the HK417 with VSR-system... Yesterday I ordered one 2014 model which is shipped today. I can't wait to arrive.
  20. Has the V4/2014 model the same hopup chamber/rubber as the last 2013/V3 model?
  21. I want to upgrade one of my Glock which made by KJ Works. I have four questions: - I saw on the WGC some Guarder-made slides. I`m interested to buy one OD colored slied but I can`t find everywhere one KJ Glock with that slide - because I want to see the color different. If anybody has picture about one of same gun I will be happy. - The Guarder`s SSA slide isn`t gay, what do you think? - Anybody tried GM ZeroHammer V2 in KJ Glocks? I tried V1 but I have lot of compatibility problem so I sold that parts. Now I interest to buy the new one to this build but I don`t want to waste my money a
  22. Not yet fully complete. Little bit more to spend on it to be perfect - need leight weight parts (BBU, etc). Thanks!
  23. "Silver Shark" Based on TM with some custom parts. This is the second phase...
  24. Batmause

    AGM M4 GBB

    http://rsov.com/index.php?target=products&product_id=5506 I have ordered one.
  25. Batmause

    OCP Spring Guides for HiCapas

    Hey There, I made a new spring guide for Marui-system HiCapas with my frined. Our goal was that to made the lightest spring guide for raceguns.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.