Batmause
-
Content Count
302 -
Joined
-
Last visited
-
Days Won
11
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Everything posted by Batmause
-
Because the OTs-14 project, I bought another one WELL G74A from Gunfire.pl. I will share the photos about it, comming soon.
-
And we got more and more experiences with them. - The WELL-made magazines has issues with the dry-fire switch. Take out the switch and file the locking arms to let them move more easier. - The rivets need to fixed properly. If they wasn't fixed, the back part can move a lot and after time the stock hinge and the base of recoil spring guide can break appart. There are 3 broken part from around 12 G74A. I'm working hard to find a new source for replacement parts, maybe KYairsoft will help to get stock, WE part. - The CO2 magazine work much better as the GG version. I highly recommend it. I
-
From the album: OTS-14 Conversion Kit
We made the newest version with leftside charging handle and with side rails. It seems to be sooooo tactical.© Owned and produced by GBB Hungary
-
On stock again, this time at asiaairsoft. They have AK74MN too. http://www.asiaairsoft.com/index_eproduct_view.php?products_id=9367 http://www.asiaairsoft.com/index_eproduct_view.php?products_id=9369
-
New handguards. An OTs-14 like and a tactical version. Now the old, AMD-65-like is discontinued and we never made that version - except if somebody ask to do it.
-
From the album: OTS-14 Conversion Kit
Few parts to let see how they looks like before painting, after painting, etc.© Owned and produced by GBB Hungary.
-
From the album: OTS-14 Conversion Kit
We made a tactical version, just for fun. This set is lighter and has two rail on the side - for lamps, for example.© Owned and produced by GBB Hungary.
-
From the album: OTS-14 Conversion Kit
We made the new lower handguard, now the OTs-14 conversation is finished.© Owned and produced by GBB Hungary.
-
Yes, its is a modified AMD-65 handguard and we reinforced it. We choosed this handguard because the original design is to "labor-intensive". If you saw an Hepa OTS-14 then you know that the lower handguard has a big wooble. We use this solution to make a rock-solid gun. 3D-printing is expensive in this size. If we had own, good-quality printer then we made with 3D-printer - but currently we have only a FF FDM printer which isn't a good one. The print oftern warp or fallout from the printing bed. Basically I use that printer to check the size for the small parts - for example, I made an au
-
No, 250€ - I made this mistake by phone, sorry.
-
We finished the first two conversion kit and we know the price, it's 350€. exluded the shipping cost. The shipping cost is around $30 into the EU. It is drop-in fit with WE and WELL AKs74u but also compatible with GHK, VFC, E&L guns. You can also use this with V6 gearbox on AEGs which made with E&L- or VFC-standards. Here you can find few photo about the conversion kit.
-
From the album: OTS-14 Conversion Kit
Here is the first batch with the final design. This conversion kit based on the size of WELL/WE AK platform but it will fit to the standard VFC-GHK system too. A few, light modification may needed for this conversion kit but we spent a lot time to make it drop-in fit (as it is possible).© Owned and produced by GBB Hungary
-
From the album: OTS-14 Conversion Kit
Here is the first batch with the final design. This conversion kit based on the size of WELL/WE AK platform but it will fit to the standard VFC-GHK system too. A few, light modification may needed for this conversion kit but we spent a lot time to make it drop-in fit (as it is possible).© Owned and produced by GBB Hungary
-
From the album: OTS-14 Conversion Kit
Here is the first batch with the final design. This conversion kit based on the size of WELL/WE AK platform but it will fit to the standard VFC-GHK system too. A few, light modification may needed for this conversion kit but we spent a lot time to make it drop-in fit (as it is possible).© Owned and produced by GBB Hungary
-
From the album: OTS-14 Conversion Kit
Here is the first batch with the final design. This conversion kit based on the size of WELL/WE AK platform but it will fit to the standard VFC-GHK system too. A few, light modification may needed for this conversion kit but we spent a lot time to make it drop-in fit (as it is possible).© Owned and produced by GBB Hungary
-
From the album: OTS-14 Conversion Kit
Here is the first batch with the final design. This conversion kit based on the size of WELL/WE AK platform but it will fit to the standard VFC-GHK system too. A few, light modification may needed for this conversion kit but we spent a lot time to make it drop-in fit (as it is possible).© Owned and produced by GBB Hungary
-
From the album: OTS-14 Conversion Kit
Here is the first batch with the final design. This conversion kit based on the size of WELL/WE AK platform but it will fit to the standard VFC-GHK system too. A few, light modification may needed for this conversion kit but we spent a lot time to make it drop-in fit (as it is possible).© Owned and produced by GBB Hungary
-
From the album: OTS-14 Conversion Kit
Here is the first batch with the final design. This conversion kit based on the size of WELL/WE AK platform but it will fit to the standard VFC-GHK system too. A few, light modification may needed for this conversion kit but we spent a lot time to make it drop-in fit (as it is possible).© Owned and produced by GBB Hungary
-
From the album: OTS-14 Conversion Kit
Here is the first batch with the final design. This conversion kit based on the size of WELL/WE AK platform but it will fit to the standard VFC-GHK system too. A few, light modification may needed for this conversion kit but we spent a lot time to make it drop-in fit (as it is possible).© Owned and produced by GBB Hungary
-
From the album: BST Works
It isn't custom made parts, they are mass-produced reinforcements for your TM SR-10 or for your JG BAR-10. It was made from stainless steel. We worked a lot to reach the current size because we want to do it compatible with any of VSR hopup rubber. The newest version is totally compatible with the o-ring grooved hopup rubbers, like Modify or NineBall. It has a soft, buffer to keep the piston quiet and make it more long-lasting.© Owned by BST Works and GBB Hungary
-
Here I will upload photos about items which made and designed by the hungarian BST Works. BST Works is a hungarian workshop which specializated to rebuild spring snipers (for example VSR-10, Bar-10, MB-03) and other airsoft guns (for example TM M870-series). They has a lot, high quality parts which tested and produced in the highest quality as possible.
-
-
From the album: BST Works
It isn't custom made parts, they are mass-produced reinforcements for your TM SR-10 or for your JG BAR-10. Reinforced trigger guide made from a solid aluminium piece. The parts has black eloxated finish. Drop-in fit even with Zero Triggers. You can saw how it fit with our Zero Trigger.© Owned by BST Works and GBB Hungary
-
From the album: BST Works
It isn't custom made parts, they are mass-produced reinforcements for your TM SR-10 or for your JG BAR-10. The side panels were made from reinforced, alloyed aluminium. The pins were made from brezon which is really hard material. The other parts were made from ST-37 steel. You can adjust the trigger force - trigger lenght. The trigger move really smoothly. Basically we sold them with 5 years warranty.© Owned by BST Works and GBB Hungary
-
BST Works - VSR-10 piston, cylinder, cylinder head and spring guide
Batmause posted a gallery image in Member's Gallery
From the album: BST Works
It isn't custom made parts, they are mass-produced reinforcements for your TM SR-10 or for your JG BAR-10. The cylinder also was made from stainless steel. We polished it very well, looks like a mirror which reach smooth action. The end is welded, it won't fall out. We recommend to use it with our own parts for the best performance.© Owned by BST Works and GBB Hungary
-
BST Works - VSR-10 piston, cylinder head and spring guide
Batmause posted a gallery image in Member's Gallery
From the album: BST Works
It isn't custom made parts, they are mass-produced reinforcements for your TM SR-10 or for your JG BAR-10. We produced the piston from three different material. The body was made from high strengt, alloyed aluminium. The back-part connected with glued screw-thead and it was made from high strenght stainless steel and at last, we placed "plastic" spacers on the piston to reach the really smooth movement in the cylinder. This parts tested and it won't be never worned, we haven't any replacement issue in the past (even after 10 year of use). We recommend to use it with our own parts for the best© Owned by BST Works and GBB Hungary
