Kowalsky

It's a shame, because i used my M16A3 yesterday for the first time (i had to run on CO2, -5ºC) and it went so smooth it still amazes me. Managed to get my NPAS to ~300ish FPS (to avoid any unnecessary pain) and got some pretty nice kills (plus a lot of "woah, cool stuff you have here"). I'll see how well performs on my next match. Btw, a friend of mine has my exact M16A3, with the very same NPAS (except he has an extra o-ring inside the NPAS, in the power adjust screw) but had some problems. The big external o-ring from the nozzle seems to be a bit worn out after the game, and we ha

sorry to change the topic a bit, but just went through all the pages (for 5th or 6th time) and i think i didn't read anything about it (maybe i missed it, wich i doubt...). Is there any way to reduce the amount of gas released from the mag in every shot? i'm not talking about a NPAS or a TSC-rod, but something like a "low-flow mag valve", to reduce the FPS (to a constant value, no need to be adjustable) while increasing gas "durability". I've found myself that i get 60-70ish shots with my CO2 mags (i get about 90-120 with GG), and i'd like to increase that amount of shots slightly (if pos

Yeah, you make it sound easy! i've already seen the video (www.ts-custom.com), seems easy enough, at least its twice as easy as with the SCAR

you telling me i wasted 50$ on 2 "TSC Adjustable rod"? guess i'll have to stay with them for some time. L4byr1nth, once you release the rear pin, and "break" your M16 in 2 (make sure there is no mag), pull the charging handle carefully, and the bolt will follow. then simply remove the bolt smoothly, and check if your nozzle is V1 or V2. BTW, any advice on how to install my TSC Adjustable rod?, need to get it to work on 2 M16, but got no clue (just received them on monday)

Let me give you a piece of advice If after 2 weeks they don't answer, contact them. If after a month they don't answer, contact Paypal. Works everytime. Paypal only provides insurance for the first 45 days after the transaction has been made. After that, you are on your own, and tbh, i don't like losing money So... from 11 september to 23 october it's 42 days. If i were you, i'd contact Paypal (in fact i was about to contact Paypal the same day i got the Custom Letter, as it was a month ago). Make sure you also send an e-mail to the company, letting them know that you are cl

Well, appearently he was doing fine before, but in "ninja mode" (noone saw him coming, except Customs ofc). I waited for over 2 weeks (standard delivery time from HK to Spain) and when i was about to send an e-mail, i got the Customs mail telling me i had "something" waiting At least now they give you tracking number (2xM16 + 12CO2Mag + 2TSC Adjusting Rod = 1000€ and 25Kg, Custom bait!!)

And i thought i was screwed for living in Spain and having to deal with my Customs... looks like the same everywere

I bought 2 WE M16 a week ago, wrote them 3 emails, but got no response. Yesterday i received an e-mail notifying me that the order was being processed (thanks god). That means they are not dead, but got no answer to the e-mails yet. I was asking them about their "M16 Custom package", and what did it include. If someone knows the answer, and knows if that M16 comes with the CO2 Nozzle, i'd be very happy to know something about it (either good or bad news).

Well, 5-6m means you have 5-6m of "probable" winds below your bb trajectory, so any ascendant air will for sure make your bb go up as soon as the ball loses its initial energy and starts relying on the hop-up effect for extra distance. Where the bb should fall (in a no-hop situation), that small hop-up rotation negates the upcomming pressure and accumulates it under the bb (pretty much what plane wings do), so any extra presure (ascending air in that case) will make the bb to go up (until the Hop-up effect slows down and gravity does its job). Not really a hop problem, it's more of a

Idd, seems to be the problem, as pulling the bolt back apparently loads the bb (using that new mag system). Anyway, the loading should be done not at the same time, but a little before the piston sear catches the piston. May be hard, and i think Marui managed to do both at the same time, which can be a problem.

Sorry for the offtopic: Just wanted to thank everyone in this thread: All your posts helped me to decide which M4 i'm going to buy(actually i'm buying an M4 and an M16 ), is good to know that all WE problems can be solved I was in an inner fight between WA (either G&P or INO), KJW (which i tested) or WE, but i see there is more dedication on all WE owners (yeah, might be because all the others are playing instead of repairing, but i'm fine with that ), so i'm going to add myself to this great "WE Community" Again, thanks and keep this great work you are doing P.S: Spe

Gawd, that's really gross!! why would someone paint an eagle holding... an AK?

TM Mk23 SOCOM Silencer is fully functional (or at least replaces the "Pop" at the end of the barrel for an "oh *suitcase*, where's that *bramston pickle*" 20m away ) I also own a silencer (Classic Army iirc) which seems to do it's job quite well (have only tried it on my P90, not that it can silence much of it). My conclusion is that as long as they have some kind of foam inside, they'll work. well, you can always use it to increase inner barrel lenght

Well, i wouldn't consider "AEG" that silent tbh, i'm also considering getting a Silencer for my GBB, only hearing the "clack clack" from the blowback is really scary (just as much as hearing a supressed sniper ) Ofc i prefer the sound of a GBB over the sound of any AEG (specially those EBB), but you sometimes feel in need of some "tactical silence" (also the looks are awesome depending on the gear you have atm ^^)