Jump to content

vilerk

Regular Poster
  • Content Count

    447
  • Joined

  • Last visited

Everything posted by vilerk

  1. Ordered a Visionking short dot on 8/22, after confirming with them 2 days before that it was in stock, and it arrived today, only taking 5 days using airmail. Scope is indeed new and functions %100, so props to Airsoftglobal for a quick, problem-free order.
  2. vilerk

    KJW M4

    STANAG mags are now available, http://www.airsofttaiwan.com/shop/goods.php?id=486, sorry if this was already posted, just wanted to let you guys know.
  3. Airsoftglobal has them, check under new products.
  4. Hammer axle might be snapped on one side.
  5. Sorry, I have no experience with Dytac products whatsoever. Good to know about the Dytac wrench. I completely forgot that IA made a wrench, that probably is the best option.
  6. The Comp M4 was just thrown on from another gun for a skirmish, didn't have time to source sights for it. Probably won't, as I'm thinking of selling the gun. I completely agree, this gun is just a cluster***k of parts that came together out of boredom. Kinda wanted to make a "trollish" gun, but it's novelty is starting to wear off. Though I like the barrel chromed, brings out the dimples
  7. Minor update: Got to skirmish it a week back at Ford Ord in CA. Rail held up fine after numerous collisions with walls, cover, etc., save for some cosmetic damage. The barrel nut loosened a tiny bit, causing the barrel to wobble slightly(<1mm diameter), but that's probably my fault for not tightening it hard enough initially. This happened when I hand-tightened the nut: So lesson here is to go with Dytac, not 5KU for the wrench. As for the rail itself, the finish held up well, except for places where it was banged against a rocky surface: So I guess the rail is made of some pr
  8. Just got this in the mail today. Here's its packaging, a nondescript, cheap box. And even worse, a severe amount of under-packaging. Voila! First impressions, the anodizing is really a step up over their previous URX II line. The anodizing is no longer a thin, sparkly black, but like in the pictures, it's a nice and thick flat black. Definitely not real type 3 hard anodizing like on an AR, but the finish is still better than on most aluminum airsoft products. Due to the poor packaging, there were a few edges that were worn silver, but they aren't very noticeable. It comes w
  9. If you get the Guarder alu. slide, I'd recommend not getting the Guarder slide stops, as mine caused my steel G19 slide's slide stop notch to wear at an angle; Guarder slide stops are of a much harder steel than TM/WE/KJW. On another note, finally got my G19 to have a realistic trigger position. Here's how: The red outline is the original trigger bar stop position. I used some sheet steel from an ACM AR dust cover and bent it to shape, then CA'ed it and reinforced the gaps with epoxy. Feels nice.
  10. I've always thought that 2011=double stack, but looks like I'm wrong. Thanks for the correction.
  11. It's actually a KJW P14 frame, so it's already WA system. All that was done to get it completely WA compatible was to replace the KJW valve lock assembly with the WA part.
  12. WIP WA/KJW Infinity Pretty much all WA parts except for the KJW frame and metal slide. Need to get grip screws and a new hammer, otherwise it shoots decently with a snappy kick.
  13. Are you using the Guarder steel frame rails? Before switching to the steel frame rails, my serial plate fit correctly. Though I don't mind it now, I actually like it recessed.
  14. Indeed it is.. I couldn't source a TM hammer housing, so the WE was next in line in quality and availability. Though the WE trigger feels much better than its ABS TM, KJW, Army counterparts. Better color, texture, and less flexing, so why not?
  15. Finished my KJW/Guarder G19.. Added a WE G27 hammer housing, the trigger locks back on these now, and also a WE trigger. I hope WE releases the above grip extensions separately, they're made of good plastic and work great in this setup.
  16. Don't worry, all you need to do is just email them, and they should respond pretty quickly, they have great CS.
  17. KIC has it. http://www.kic.com.tw/shop/product_info.php?info=p10248_G19-------------------------------------BK.html&XTCsid=757bbd0ec67885d1f7dcf0444768466b
  18. Real steel Glock base plates are indeed compatible. They are a drop in, but tighter fit than the original. The indexing holes on the Glock base plates are a little smaller than the Stark, so the base plate locking tabs on the Stark mags will require a manual push to get it seated in all the way.
  19. The Guarder steel frame for KJWs is out, so far only on Evike that I've seen. http://www.evike.com/product_info.php?products_id=41122 I ordered it today, should come by next week.
  20. Just inspected a friend's new A&K SPR Mod 1, since when did ACM guns have anodized aluminum receivers?

    1. renegadecow

      renegadecow

      When they realized us airsofters like to kiss and smother our guns and leaded paint is hardly healthy.

  21. Yes, so far I've tried them with KJW, WE, and TM Glocks, and they worked fine(with the appropriate shaped seal of course), though depending on which model you are using, the output seal might need a shim to raise it up. Also, interesting fact, looks like these magazines are modeled after 6th gen Glock mags.
  22. I have some base plates coming in the mail, should come in next week. Also, switched out the curved seals with WE flat seals with no problems, and the curved seals work fine in WE magazines in conjunction with WE nozzles with curved input windows.
  23. Got a pic from my friend: Yep, flat seals definitely work better with the flat windowed nozzle. Since my friend's WE G17 has a the curved window nozzle, I'm going to trade my Stark curved seals with his WE flat seals. Hopefully it should work fine.
  24. I'll try to get a base plate from a friend to take a pic. I also took some measurements. The SA mag measures 24.5mm wide for the baseplate slots, while my KJW mag measures 22.5mm. Snoopy: I actually found WE G17 mags to have both flat and curved seals, after looking at my friend's mags. His WE G17 also had a nozzle with the curved window, while my WE G19 nozzle has a flat window. Interesting that Guarder makes two types of nozzles, the second type with the rocket valve looks exactly like my KJW nozzle assembly, casting marks and all. I'll try replacing the Stark mag's seal w
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.