Jump to content

vilerk

Regular Poster
  • Content Count

    447
  • Joined

  • Last visited

Everything posted by vilerk

  1. Are the frame and slide 1mm wider like the Marui?
  2. Quick question, how's the quality of the stock hop up rubber? I'm planning on getting one for my WA M4 AEG hop up since it has no protruding lip, which should make it more durable in the long run. Thanks.
  3. Thanks for the advice. My gun is currently running fine on 1 nozzle spring, so when that fails, I'll get the Action set. Also, my hammer broke today, at the right axle. Teaches me not to buy used guns off of Ebay.. To fix it without access to a machinist, you'll need: -5/32 roll pin -5/32 drill bit -Cordless drill(I used a 9.6V) -3/8OD (5/32 or greater)ID nylon bushing -Preferably a vise These parts were all sourceable from a local hardware store. You basically need to drill through the center of where the axle used to be with the 5/32 drill bit, the deeper the better.
  4. Anyone else have issues with the nozzle springs snapping? It happened to two of mine so far. As in, the loops remain on the retention posts, but the rest of the spring is separated.
  5. I just got a KMP9R a couple of days ago, and I have to say I'm impressed. It's just as loud as my Viper M4 on CO2, and the ROF is quite high. I got it used off ebay with 2 mags. I found BBs would stack up in the barrel and roll out on full auto, and stretching the disconnector spring fixed that. The ball bearing was missing from the hop up, so I made a makeshift R-hop with a pen's rubber grip. The only thing I didn't like was the folding stock's wobble. I originally bought this to convert a KSC TMP, but it will not work without a lot of modification. Basically, everything is switchab
  6. Although I don't have a VFC MP5, I wouldn't get the aluminum nozzle, there's a high chance it will break the pot metal bolt carrier, decrease ROF, and maybe damage your magazine or hop up.
  7. Does anyone know if its possible to transplant NS2 internals into the Hardkick models? I found a SPP and was hoping I could just keep the receiver and replace everything else. EDIT: And is it also to convert the magazines to NS2 by transplanting parts?
  8. The rear sight is pretty bad, comes loose and is not really "adjustable" for windage, more like "position sight blade by hand" and "insert screw and tighten". And to add to that, the elevation screw hole stripped.
  9. Mine arrived today. First impressions were not bad. It was solid, recoil spring was strong, and the slide cycles very crisply and smoothly. Slide has some rattle, but compared to other clone GBBs, its more noticeable, maybe clankier, due to the material of the slide. Trigger pull could be a little crisper. No half-cock? Slide was well oiled, but the lower was filled with grease. After cleaning and reoiling everything, fired a mag. Blowback is pretty strong for a stock pistol. Shots curve a little because the hop arm is bent to one side. The stirrup needed some filing to fit the 5KU t
  10. ACM 4x ACOG isn't waterproof, learned the hard way...

  11. For my friend's G39, I had to file an extra set of notches for a Prometheus VSR TB to fit. I'm pretty sure WE OB barrels have two pairs of locking notches on them.
  12. The one I have had a flat nub, not h shaped. I ordered it from a Taiwan website though. I can verify they don't absorb as much silicone, and I've also noticed that they're less prone to tearing and cracking.
  13. Just ordered one from RSOV along with a 5KU short 3-holed trigger. Does the pistol come with an o-ring piston head? Hopefully this gives me a better experience then my WE from years ago..
  14. Found reinforced magazine bolt stops , if anyone's interested.
  15. What about shortening the floating valve spring? I clipped 2 coils off my buddy's G39c and it dropped from 440 FPS to 390 FPS.
  16. Anyone else experience any problems withe the zippers? One of my hood zippers came off halfway, and the main zipper got a little jammed, so I had to force it.
  17. Alright, so I dremmeled part of the fins off so I could use a WA valve spring. Works perfectly, and the blowback and FPS was noticeably faster than before. Gas effiecny seems about the sane or a little better.
  18. The stock metal flute valve of my KSC Glock fits in my AGM nozzle, but the front stem part is too big and doesn't fit in the nozzle tip part. Is the System 7 valve different in the VFC? Length of the valve would be appreciated.
  19. Yeah, same thing happened to me. I tried two different trigger group sets, and two different firing blocks, both with the same result. What I did was I pulled the legs down, basically stretching it. I'd recommend getting a G&P 150% Spring and Pin set though.
  20. The lever is right there in the middle, above the valve... Remember, this is not a direct clone of WA. BTW, how's the gas efficiency?
  21. How are your guys' magazines holding up? PxAirsoft has them for sale for $36 a pop.
  22. vilerk

    AGM M4 GBB

    No, I just had to sand the mag catch for a couple of minutes. Just keep sanding and checking to find the sweet spot.
  23. vilerk

    AGM M4 GBB

    Hessu: You made a good choice with the Element Steel BC! I have one and it is very sturdy and is machined precisely. One thing to note though, you will need to enlarge the selector hole as the steel selector has a larger diameter than the stock one. Hoppersan: The nozzle should snap back into place. Sanding the rails would not solve your problem, just minimize it. The reasont he nozzle is not retracting all the way because the o-ring is a little too big. What I did was a lightly sand my o-ring with 1500 grit sandpaper till it was a perfect fit. Also try greasing the o-ring.
  24. vilerk

    AGM M4 GBB

    The OSH by Alum Rock has them, but not the Capitol Expressway one. Not sure about the others. They have about 2-3 sizes that will fit.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.