Jump to content

vilerk

Regular Poster
  • Content Count

    447
  • Joined

  • Last visited

Everything posted by vilerk

  1. vilerk

    AGM M4 GBB

    You mean the piece that goes on the side of the bolt carrier? If so, than you can get a aluminum one from RA-Tech or purchase a nozzle set. EDIT:Ohhhhhhh, I think you mean the E-clip, it's a metal clip with three ridges right? I got spares from OSH.
  2. vilerk

    AGM M4 GBB

    There is a small chance of leaking because of dry o-rings. My Pro-win leaked after I shot a couple of mags and I just sealed it with some silicone grease. I don't know about cooldown yet 'cause I've been too busy with other things to shoot.
  3. vilerk

    AGM M4 GBB

    They are one of the best for the price if you have access to a file, grease, and hard work. EDIT:Oh, and also patience. Although there are some reports of it working straight out of the box.
  4. vilerk

    AGM M4 GBB

    I've put around 1000 rounds into it. The RA-Tech AGM package comes with the INO bolt doesn't it? The INO bolt is probably the JDT one. You should be able to find all the steel parts at most Hong Kong retailers. The stock tube is pot metal. The AGM has proprietary threads, so no other stock tubes will fit.
  5. vilerk

    AGM M4 GBB

    No problem! I'm running propane too and all ACM parts right now. I have a 5KU hop up, 5KU NPAS, which works flawlessly, Element Steel Selector, and Element Steel Sear. I'm getting the Element steel bearing hammer soon. Go for the steel bolt stop. My ACM one has no wear so far, and I've had it for 5 months. If you want a 2" tight grouping, I'd get an AEG hop up with a SCS nub or just get a tightbore as the RA-Tech hop up should be good enough. I'd wouldn't use the NPAS, but instead the INO nozzle, for consistency's sake. It's cool to be able to adjust, but it's not really nec
  6. vilerk

    AGM M4 GBB

    You would need to get steel internals, like a steel sear, hammer, selector, and pins, if you plan to use the steel bolt carrier, as it puts much more stress on the internals. Trust me, I've learned it the hard way.
  7. How are your thumb/grip safety so far?
  8. vilerk

    AGM M4 GBB

    EhobbyAsia FTW!!! Had a couple of orders with them with no issues, and exactly 3 day shipping every time.
  9. vilerk

    AGM M4 GBB

    How much have you spent on it so far? Do the receivers have any wobble or gaps?
  10. vilerk

    AGM M4 GBB

    Yeah, the recoil form my GBBR loosened the lens on my replica EOtech too. Can't get to the lens without removing the wires, so I put tape in between the gaps of the lens from the outside.
  11. vilerk

    AGM M4 GBB

    Your electrical contacts may be loose. You could probably fix it with a solder?
  12. A picture of the lower internals would be helpful.
  13. vilerk

    AGM M4 GBB

    The AGM lower receiver threads are different then the RS threads, so any other buffer tube will not work. You ahve to buy a AGM replacement or buy another lower receiver.
  14. I would get a Pro-win mag. I have one right now and it cycles and recoils nicely. It can cycle my steel bolt carrier and 120% spring while my 5KU can't.
  15. vilerk

    AGM M4 GBB

    It looks like a copy of the RA-TECH plastic nozzle.
  16. It's cause when the whole upper is on, the BCG is in the way so you need to file the mag catch to let the magazine sit lower.
  17. You're nozzle is in the way of the magazine, so you will need to file down the mag catch.
  18. vilerk

    AGM M4 GBB

    That's the flute valve.
  19. So maybe I should just get the bolt carrier then and save 40$. It should be better than my ACM pot metal bolt carrier right? I'm not looking for a high ROF, just recoil and durability. Might even consider the JDT ones, I wonder if they work well with Pro-win mags...
  20. I'm thinking to get a G&P BCG set for my ACM M4. How are your guys' so far? Did anything break on them yet? Is nozzle to bolt carrier seal good? Thanks.
  21. vilerk

    AGM M4 GBB

    The mag that came with my ACM M4 was disappointing. It leaks from the fill valve, top, and bottom, the bolt stop arm broke, and the mag rubber was too soft and ripped in less than 200 rounds. You'd be better off getting a GHK or Pro-win mag.
  22. vilerk

    AGM M4 GBB

    That doesn't sound good. I just ordered a 5KU AEG hop up and a Systema barrel and bucking. I wonder how long the systema will last.
  23. vilerk

    AGM M4 GBB

    Thanks for the replies guys. Would it still work if I filed both the magazine and magwell so they could be compatible with other bodies and magazines? I'll probably be sticking with GHK a long time, unless the Prowin mags are 50ish and the G&P mags are state-side.
  24. vilerk

    AGM M4 GBB

    Do you have the ACM or AGM M4? Can you get at least 1 mag on non stop full auto with bolt catch with the GHK? How did it perform in a skirmish? EDIT:I'm stupid You have the AGM M4, hence the AGM mag.
  25. vilerk

    AGM M4 GBB

    My 5KU NPAS fit perfectly with my ACM M4 nozzle. But the pin hole on it was too small for my other nozzle. Just another case of different manufacturer specs, I suppose. Also, what are the ACM/AGM owners' opinions with GHK magazines? My local shop(owned by my neighbor, yay!) says that the GHKs are a bit iffy, with sticky valves and some misfeeding. He also said he could get AGM magazines, but I'm sort of against Chinese magazines, with their bad QC and all.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.