-
Content Count
242 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Everything posted by Raven1
-
Kai, Don't sweat what mags you have bro, I have the original that came with the gun (which needed the upgraded spring) and a first run magazine for a total of 2 mags. Both mags needed the upgraded spring to work the bolt catch better. After several thousand hard beans down range and severe duty use on the mags as I drop them on hard ground, dirt, hard mud, fine desert sand and on hard concrete in the warehouse where we test the gun. These mags have held up to every manner of adverse treatment. So buy with confidence and don't worry about having to baby them,,,,I mean it's not like you
-
Not you bro, so please don't feel that way! Good News people - Release date of 10-11-2009! Clicky on the TK M4 Pic On The Top Left http://translate.google.com/translate?js=y...%25E3%2580%2582 I can see jugs of 'Hater-Aid' being opened up already - Looks like the JDM version will come with a New Fluffier Lighter Waffle! Just kidding, new mags are lighter and more efficient, like the previous magazine isn't efficient already!
-
Actually It's A Recurring Theme Here At Werk! It's A Joke People Loosen The Hehllz Up! We're All Hip Hop Heads and she sampled it from Biggie Smalls 'Party and Bullesh" track, there's a pretty good mash up of it if you google "miley cyrus + biggie smalls" and click on video results you get the song - Which Is Bangin BTW! So People Please Chill Out - I Got A Warning Over At The GGI Forums so I politely asked them to please remove me from the forums. If I can't have fun and be myself then there's no need to for me to be there! AnyWays Back In My Lane! There is so much you can do as
-
The castle nut to the receiver is purely cosmetic, just there for looks! Remove the stock, at the end of the stock tube is a long slotted end cap, underneath the stock tube - there is a small 1.5mm hex key set screw, loosen set screw first W/1.5mm key, take your average NON SHARP kitchen Butter Knife - Again - Non Sharp, the butter knife is the perfect thickness for the end cap, use the rounded edge so it doesn't gouge the cap, Tighten the slotted end cap at the end of the buffer tube, Tight as you can get it, Use Blue Loc-Tite on small set screw, tighten small set scr
-
Well Since We KJW M4 Owners have nothing to *badgeress* about and nothing really to upgrade or fix,,,, Time For A Pedo-Bear Approved Break! YUMMY!!
-
We'll be shooting the ###### out of the gun in a few hours - in a very aggressive hyper-manipulative Raven1 style.
-
Barrels are on the way, Laylax is bring one to market and there is another barrel already for sale on the Intruder shop as well. That one you can vary from carbine length 16" to CQB 10.5" barrel length. All metal, again the first barrel will be all one piece the 2nd is also all metal but 3 piece for different lengths,,,
-
Yes the MK18 RIS will fit, go back to page 8, post #148 and you'll see mine installed, it's the G&P but the dimensions are the same. Buy it, install it, shoot it and forget about it, No Reliability Mods Needed! Makes me kind of laugh, poor fellas been jilted by that 'Other' Evil Beotch you're all scared to roll up on the new hot Beotch and say'What's Up - Mind if I give ya a lil squeeze?'
-
Nice! People will see the light of day once they realize that owning a WA Design Gun is Like Renting a Stripper for A Girl Friend - Looks Sexxxy and Nasty - Looks Great Hanging Off Of You - But The Beotch Is Expensive and Won't Play With You Once Your Money Is Gone!!!
-
Like t_hum says when they are ready, parts will ship where ever you are, well provided you have a post office,,,
-
Norman are you living in Japan now? As the TK may just be your only option for now, maybe? Nobody is making fun or you bro, just know that all you'll really spend on the gun is BB's and gas. Anything else you spend will be purely cosmetic. Kai - That is being worked on this week, piston works great btw, NPAS testing will begin Wednesday or Thursday of this week. "Why did the KJW M4 Owners Buy Parts For Their Gun? Because They Wanted To Make It Look Like Something Else,,,,,Suckas!"
-
That guy doesn't appear to be very smart and very rash in his decisions - too bad as it is his loss. And getting a JG over the KJW M4 is just really Insane! A Fool and his money are soon parted,,,,,
-
Yep, Sorry guys I was only listing that one as an example, waaaayyy Pricey! And Yes the stock inner barrel is short, I cut my KJW outer barrel down on a lathe to 10.5" and the inner barrel is still well inside the outer barrel,,,
-
The barrel you listed Will NOT Work, defferent design altogether. The barrel you want that will work is this barrel here http://www.redwolfairsoft.com/redwolf/airs...il?prodID=23548 as it has the exact same cut as the stock KJW barrel to work with the KJW hop up,,,
-
I don't believe anyone else other than myself has had an AEG barrel machined a barrel to fit onto KJW. There are 2 extra cuts that need to be made in order for the AEG barrel to work properly. Short answer is No, the barrel you linked will not work,,,,until the machining cuts are made.
-
Wifey made dinner but I was at the bar eating with the boys after the softball tourney. Seriously, just trying to help,,,, + it helps that everyone here on Arnie's is easy to post with,,,,
-
About 45 minutes, but hey, I'm just trying to help,,,
-
Kai Wolf, The front sight and stock you listed will fit with out any modifications and you are good to go. If you're having doubts just swap a standard AEG A-Frame front sight and you'll see it will line up and work no problemo! Well it seems things are getting somewhat convoluted! If there will be no official pressure regulation from TK then t_hum and I will have one available shortly. Pressure will be adjusted by simply swapping a simple part. But more on that once t_hum and I have gathered more data and perfected our process. Negative Pressure System By allowing the
-
From what my girl read on the website is the the fit and finish of the TK version is very high quality, comes equipped with real steel fore grips and the TK twist barrel. Again the TK version is for sale in the JDM and Taiwan. Non serialized KJW version is for 'Export' sale and is good to go. So far there is no new information on when another newer version is to be released. Also no word officially yet about a TK NPAS for the gun. Maybe after market support is providing this? Can't say for sure other than what has been posted on airsoft EU. Correct! The WA Sling attachments Will
-
Sorry for the confusion, if you click on the link, on the left side in the products column listed with the 'Jolly Roger' patches it reads "Available mid-May 09" and then when you click on that link the first line in the description reads "Available in mid-February 2009 [10]" This being the case then it appears the release is right on track which is great news! I apologize for any confusion,,,
-
Not sure, I have not done any research on the AK,,,
-
Exactly that, allows for the end user to 'set' a desired FPS for what ever the field rules are. Side note: Just hit the 'First Factory' website and they are taking Pre-Orders on the TK M4 and they are stating Mid-February of 2010. http://translate.google.com/translate?hl=e...w.first-jp.com/ And the 'Series' will be named the "Life Toy Gun - 5 Minutes Before" and from what I gathered from the website Kobayashi-san seems extremely passionate about this series and has been dreaming of making this a reality since 1961. http://translate.google.com/translate?js=y...%25E3%2580%25
-
Guys, As posted earlier the gun is very new and after market support is already on its way. What we do know: KJW is making the 'Export' guns TK is making the 'Domestic' guns for Japan / Taiwan Again this is due to the legal and safety regulations imposed by the Japanese government. BE aware that parts should interchange from that of the TK directly onto the KJW. It is not the Japanese way to throw away years of hard work and start again from scratch this late in development. So we early adopters will not be left out in the cold to buy all new guns. Personally I'm loo
-
Yes, the rail will fit and you shouldn't have any fitment problem,