tyguy94920
-
Content Count
88 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Everything posted by tyguy94920
-
I have put a RS backstrap on the VFC. It fits, but it's a very TIGHT fit. It required a punch, a screwdriver, vice grips, and 2 people to get it off, not fun
-
Well, using the real FN-tac's doctor adapter plate as an example. There's holes in the BBU and holes in the MRDS and if you use two screws you can attach them together
-
Real Steel USP, Glock, Sig? For airsoft you can use a real Mk.23 one found on HKparts
-
Except the Doctor style MRDS's don't need a mount to fit to the Cybergun, they'll screw right onto the BBU
-
I used Rustoleum to do the slide, it looks like trash so I need to buy some Duracoat rattle can. Did the frame in Forest Green Rit Dye, it's too dark of a green so I may redo it.
-
Wow, I got a real job and too busy to post. Sorry guys, but hey I did a thing As for a little RS and Cybergun comparison, had to take out the mag release. Left is Cybergun, right is RS. The springs are cross compatible, and the mag releases fit, but as you can see they will not function
-
I've never had any hands on with a VFC, so I can't say for sure I think I may have been a bit hard on it out of the box, too used to the RS, it's growing on me. The frame actually has less flex than the real deal, but there's a few things about it that just makes it feel cheaper than it is EDIT: Backstraps swap but they're tight, mag baseplates don't so you're stuck with the bulky ones
-
Gotta keep you guys waiting for my full comparison though, sorry. Short and obvious, slides don't swap, mags don't swap, thread protector don't swap And I have to agree with BerserkDS, this in no way feels like what I've heard of the glorious VFC quality, it feels like a WE or worse. It is in no way worth the $225 price tag. Safety is weak, recoil spring is weak. It does say "Made in Taiwan"
-
2nd? It's at least the third. It was Sub 160 on china sites, then it was 189 in the US, and now WGC
-
That looks like it may actually work
-
I got my clone RMR from Ebairsoft, installed with no problems I should've noticed that the RMR holes on the CG were in the wrong place the whole time, the issue looks to be that in the location that the would be in the RS they would be on the edges of the BBU (holes marked with red)
-
Now we have to wait for mine to see the comparability with the Real Deal
