mugur
Regular Poster-
Content Count
144 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Everything posted by mugur
-
yes, they are. thank you for your nice words.
-
No, from what i know. It was an US company that made this hard coating, method also for real firearms. i will ask the guy and give you a pm.
-
Danny, the teflon coated no idea how expensive is, i've bought them already finished. The prime lowers are perfect, no modification required.
-
Back to the topic as i have moved from VFC to Systema:
-
Project VFC M4A1 "double wing" Not that nice as some rifles here, but here i go. Short wing Long wing Those are old pictures. Will get the latest long wing photo and details soon. Here is the latest short wing* image (got optics) VFC M4A1 base G&P M160 motor AWS Raptor Lipo 2S Tanio Koba twist barrel Prometheus Neo Chamber Firefly rubber and nub Vltor stock M6X flashlight SpecterDR 1-4X
-
it is a modified VFC M4A1 Quake flash hider.
-
my upper #1 my baby with upper #1 my upper #2 my baby with upper #2 Since the pictures, the #2 also got troy sights and the #1 got SpecterDR 1X-4X.
-
get a catapult and throw your G&P 230ft and hit that people. i play as a sniper and i know how is to shot someone at that range... disclaimer: that was a joke to relax the created atmosphere a bit...
-
Holly...mags. Even thoug my rifle is not that much "magpulised" as other rifles here, i hope the pictures will fit here. I am a dedicated sniper and i've built this rifle especially because i liked the VFC M4A1 Quake so much.
-
White_rabbit, if it was for me, Thank you!
-
randominterupt, do you remember where you bought yours?
-
i have used a dremel for that job and worked flawless.
-
thank you. can't seem to find one to actually buy
-
true, but is still too much for me. needed only on high springs setups...
-
true, but is still too much for me. needed only on high springs setups...
-
incredible rifles here... please, can someone point me in the right direction where i can buy a magazine holder like the one in this picture?
-
my opinion is that the stock piston will not be able to hold a powerful spring more than few shots...but i have 2 stock AWS pistons so i might try it. I have received an 150-160m/s spring that might actually work in the stock setup. Also, the rest of the internals (assuming you will put a 2nd sear inside) will hold the power with no problems at all.
-
@ ahadsz Ok, keep in mind that i speak only for myself . At 154m/s and the mentioned setup, my rifle shoot perfect with SGM.29 and also good enough with Devil Blaster .30. Using Blaster .40 the trajectory is amazing but i loose some range, although the bb's are not so easy stooped by the leaves, small branches, etc, nor the wind affects them so easy. @Md2a You cannot use the pdi springs (130 or 140) with the stock cilinder/piston. If there are other springs that are designed for the stock setup, i am highly curios to know abot them. Meaning they have to be ~11mm exterior, ~9mm i
-
i am just speaking for AWS. I suppose here are enough specialists in VSR to point you in the right direction.
-
With the mentioned setup, my rifle was chronoed at 154m/s constant. Part of the incredible air seal of that particular chamber, part of the 6.01 pdi barrel.
-
Md2A, you will never put the pdi140 in that piston you have stock. It is simply another diameter...
-
ok then, here is my setup: pdi cilinder set (vc) 4 x pdi spacers pdi 6.01 barrel pdi 140 spring pdi 1st and 2nd sear some "personal work" on the hop-up chamber fitted with a SCS nub also. good luck!
-
i have a marui clone, Well R7 i think is the one, so if it fited in your mp7 battery place, i suppose will have to fit in mine too. Thank you for your help.
-
Thank you, i have some micro-deans, as i am a RC passionate as well. Can you tell me the approximate dimensions of that lipo please?