Papabois

Hi Kruck. Ya really must soak the rubber, submerged in acetone. You can see when it's soaking, little bubbles coming out of it. Let it soak for about an hour, then dry for a day. To get that pin out, you must brace the surrounding area with a hollow something (I used a socket, with a hole big enough for the pin to go into). The tap the pin out, with something that is a wee bit smaller than the pin. If undoing the hop-up assembly, watch the spring under the cam, and at the front...clicky-noise-maker. They like to, "Sproing-out".

Allright! which one is it? Lube the hop-up, or don't lube the hop-up? Like Panteras, mine was doing that too. My problem was with the hop-up swelling from absorption of lube I believe. I took it out, soaked it in acetone (which on another forum, said that was a no no), and it worked! It does it once and a while again, and I believe it's because my propellant is a little weak (I have a KWA version that's sposta be run on greengas, but I'm using Tetra. When I get some GG, and some BB B_stards to test, I'll know know for sure. Is there a hop-up expert anywhere in the world, tha