-
Content Count
334 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Posts posted by wilekcmc
-
-
350 fps , can hit a man sized target , at 50 Mtrs can hit a 2x2 ft target with relative ease .
Has taken a good few magazines for the guarder clear hop to bed in properly . Was about to give up with it and then it settled and the range is awesome . Was picking of off other players at rift Airsoft site with ease . And out ranging most of them by at least 10 Mtrs . . At 300fps the range is marginally less but the accuracy is still exceptional . Is matching my tm aug phantom kitted psg1 barrelled , overbored aug for range . Which takes some doing ..
Put it up against a 400 fps vsr ( tm ) and range wise it equals it on .25 bbs
Thanks for the info may try the guarder clear, can only shoot 290 fps do to the 1J law here. What kind of nub did you use?
Thanks again
-
Just picked up an 11.1 lipo battery 1100mah that fits perfectly into the handgrip . And by sheer fluke fits the pdw99 . Am now using a guarder clear hop set and a madbull 603 tightbore and with . 25 bbs the range has increased quite a bit . Am accurately hitting 60 Mtrs with this gun now .
Whats your FPS on your 97?
-
Yea the peq battery box was the easiest for me, like your post.
-
Ok i understand this is for the Scar Light but i hae a question on the Scar H, hoping someone ca help me with.
Is there a tappet plate that is better then the stock one? All ready had to replace it after three games.
Thanks
-
Yea the lack of the rail is a draw back but i added one.
Glade you like the 97 it is fun to use.
-
Need some help please, My select lever will not work on sime that much. Auto works grate i rememrber a fix for this but cant find it. some help please. Also what would be some great upgrade for greas,
Thanks
-
Thanks enjoyed the review and sarcasm.
-
After cleaning up my t97 and replacing the piston, I decided to see how much of a difference in wear and tear with the 97B. I must say i was surprise to see everything is going well and the piston does not need replacing. Don’t know if this because i use a 3 round burst instead of full auto. Here are some pics for you all, and yes this is my primary weapon last season.
-
you can buy from Real Sword directly
Thats what i did with the first one t97
-
Running around 300 fps
Will be opening it up in a day or so to see how the piston is holding up.
-
Wilekcmc
How are your internals holding up? I'm thinking of putting an 11.1v Lipo in mine.
Thanks
To tell the truth i havent opened it up since the end of the season. But i will say this with the 11.1 lipo i never had a problem, please rember i am using one of the best fets yo can buy.
-
I just got mine in today and love how it feels, yes it does have the screw but i don't care, i use real sword mags so good to go.
Enjoyed your review and the info, thanks.
-
This is what i got of of mine when i first did this review, i only use a 11.1V lipo
NIMH 8.4 volt =12 Rounds Per Second
Lipo 7.4 volt 20C at 2200mah = 12 Rounds Per Second
Lipo 11.1 volt 20C at 1300mah = 24 Rounds Per Second
-
Bummer to here what happen, like to here how it does after you get it back.
-
Glade to see someone else picked one up and you are enjoying it. Any beefs/dislikes about it.
-
Anyone here tried using Lonex mags with this yet?
The only mag i have found to work with out moding the back side of it was a couple of ICS stander mags.
-
Glade to see you put part of the battery in the front hand grip. What did you use to close up the base or did you leave it open?
As for a lipo, i used my right side rail for a peq battery case. Love the way yours looks with the attachments.
Personally still looking for a nice/different type of scope for it, but no luck yet.
-
I can confirm that they are the same length for you.
-
Cool i a looking forward to seeing what the g&p140 is doing for you. I wish i could use a 120 spring
Enjoy the game.
-
NookieOne, i like what you have done, need to think about doing the same thing
What is your rps with the G&P 140, also what kind of fet are you using?
I have added the Extreme-Fire sw-cheetah-2n, it gives me the option of a 3 round burst and allows me to set the motor speed for semi auto. This fet is a beast jumped my rps up to 27.
don't worry about it, you should hear me after a bottle of good sochu many tongues are spoken lolNookieOne wrote.. sorry for my rusty english skills -
I made me a new trigger rod for my T97B.
It has a small angle to the front so the triger rod is out of the way and i can fit bigger type lipos.
If you guys wish i can post pictures oder even produce some more of them for you want me to.
The litp that fits now is this one here:
.. it runs great and the trigger is working perfect now
Yes please post some pics of the trigger rod, i would like to see it.
-
Been looking to change to lipos but I'm not sure which ones will fit the lower reciever/handgrip of the Type 97. Any advice, seeing as you're using lipos?
The battery that some people use is the 7.4V 850mAh 25C+ Type 97 http://www.landwarriorairsoft.com/acatalog/LiPo_Airsoft_Batteries.html
You can find the original topic on the real sword 97 lipo battery here http://www.arniesairsoft.co.uk/forums/index.php?showtopic=180446&st=0
Hope this helps you out.
-
As i said in a different thread we had are first game of the season and i brought out my rs 97b and my X47. I have to say X47 shoots extremely well and the length was like using a DMR in a match. The only real draw back is the weight, but that is something that does not real matter that much to me.
This pic was taken during a snow shoe hike in the Hokkodas.
-
During this past weekend we had our first match of the year and i brought out my 97B. I must say it was a blast to use, easy to wheeled and some what lite to carry. With no wind for the day i was able to get 40 meter shots off. The full auto with a 11.1 volt lipo is awesome/intermediating.
The HK 416 GBBR by VFC
in Rifles (Gas)
Posted
I just picked up a VFC 416C GBB and I wonder about the mags for it, I can never tell when it is full of gas. Is it the mags or is there a differnt type of fill vaule that will blow back when the mag is full?
Thanks