WestyIII

New toy for my LMT Merp, if anyone knows of where I can get hold of (or swap) the shorter 10.5" LMT barrel, it would be much appreciated! Cheers Will

I prefer the liquid

Been using Froglube for a while now. Was told it improves the life of rubber O-rings and hop ups, so I have used it on most of my gats. Smoothed my VSR's actions up nicely, in addition to my GBB's and AEG gearboxes. As for cold temp performance, no problems for my AEGS's in -3C in January, - I don't use my GBB's when it is so cold! Once it has been applied it does stay slippery for a very long time. When it finally runs out, I will be replacing it. Only Drawback: You will get the mick taken out of you for spending a fortune on minty-Lube, that the SEALs use...

These back on production? Had one years ago. Not brilliant and a bit finicky.

Apologies for the Double post, but who has built the 10/22 - RA Tech M1 Carbine kit? I ask because the front sight is a long way off fitting the front of the M1 barrel, am I missing something, or will I have to mod the sight to fit? Thanks

Mine arrived in around 9 days, finish is superb (not for long). Mags are a little tight, TM mags do not fit, however I am going to do a bit of sanding this eve to see if I can get a better fit... Range accuracy look good so far, put around 5 mags through. This is the base for my 'silver baller'

Favorite G3 ever.

Defo looking into that! Thanks man!

Thanks - I agree. Yeah I'd just finished the 20round mag conversion, finished in matt Krylon, and just snapped it. To be honest the light is too bright, so will have to get it out again at some point... Edges will be painted a gun metal silver, then I will respray, with a more metallic looking back, and gently sand away to reveal the silver underneath... Thats the plan, but any other ideas are welcome. I also need to weather and darken the plastic motor grip, so it fits in with the rest of the Thompson.

http://www.flickr.com/photos/56761289@N05/6817488251/in/photostream/ Flickr is being rubbish. - Sorry. It is a Real Steel WW2 stock. So I have done very little to the finish apart from cleaning the gun oil off. Abuse, gun oil, and 50 odd years would give a similar finish , It's my pride and joy, as there are initials etched and scored into the wood.

20 round mid caps . Modified and cut up the 30 rounder Mids, that was attempt one so a bit rough, you can see the cut. Going to bondo, re-sand, and repaint when I get the chance. Only four or nine more to do...

Had mine since launch, had a leaky mag yesterday, (my first) but easy easy fix. I mean, really easy. Performing well, no hop up, use .3s, have used the rifle sight to lob bbs on to people at range. Hilarious fun.

L129a1 by WestyIII, on Flickr Build (from memory) Externals: G&P SR -25 Base Noveske 12.658" Rail Noveske 16" Outer barrel BE Meyers 5.56 Flash hider Harris Bipod VFG - not shown, I don't get on with it. Ergo grip G&P LMT stock KAC BUIS NCStar Scope Trijicon RMR sight -Clone Engraving Internals: Prometheus TBB Prommy rubber & H bucking Mosfet High torque gear set SHS Ultra Torque motor

Thanks man, took a lot of sourcing and work. It's a 12.658" Noveske rail. I know there is many parts a miss, but its as close as I can realistically get it at the minute. L129a1 by WestyIII, on Flickr

I guess it is a derivative, or is that a bit of a push?

Very easy, it is the pre-assembled full steel LCT AK-MGMS kit from WGC. I didn't have to do a thing. However, I have disassembled it etc, and the MGMS kit fits together very well, very easy to kit I would imagine. One of my best airsoft buys, fell in love with that model, and the next day it was on a huge discount ~ $125 IIRC. - it was meant to be.

021 by WestyIII, on Flickr 023 by WestyIII, on Flickr Tm M1a1 Thompson. RS Wood Kit 20 Round mag

021 by WestyIII, on Flickr 023 by WestyIII, on Flickr Tm M1a1 Thompson. RS Wood Kit 20 Round mag

L129a1 by WestyIII, on Flickr

035 by WestyIII, on Flickr

My 2. Top one for sale ... 016 by WestyIII, on Flickr 017 by WestyIII, on Flickr 019 by WestyIII, on Flickr

006 by WestyIII, on Flickr 40mm Goodness

Damn review persuading me to get a new R29 as a project.... Grumble grumble mutter mutter

Very quick delivery from these guys, next day to plus one, quick to respond on email as well. No complaints from me.

Just ordered the M1 10/22 after this thread. Thanks guys for making me buy another gat :/ Falcon Hop and RA tech goodies to go inside!