Wingmann

Before, the "sort by" had a selection that locked it in place for that browser, so if I chose "last replies first" and locked it, it would be that way all the time. Now I have to sort by every time I visit the forum, which is quite unpractical. Is there a chance to have it as a permanent selection? Thanks!

Definitely a darker theme would be welcome in the new forums. Thanks!

I ordered an SR-3 and five 100rd magazines from them and I had to chase them for a MONTH to get my money back. After a week without a tracking number I asked them and they didn't have ANYTHING in stock. First time I asked for a refund. Second week, nothing but promises they will get stock. Third week, asked for a refund yet again. They kept promising the stock was coming. Fourth week, asked them and gave them five hours to comply. They failed and I placed a claim with Paypal, that was granted right away. I don't think I'll try them again (and I've bought several times there) unless I send an

Non-bio is not really an option in most countries.

I stopped buying in eHA since they sent me an untraded model of the CZ Shadow instead of the one with trades they were showing for some extra dollars. Never again.

Wow, it's indeed really small... I wonder if there will be space in the stock itself to do some DIY battery space.

Could you take a picture of the battery compartment? Thanks!

Between the back of the nozzle and piston head, normally, so the valve sits closer to the closed position. Also, a weaker valve spring or weaker hammer spring would do the trick. Is there any other way to do this?

Embrace the suck!

They should make them HPA ready from the get go and forget about gas reservoirs, limited shots and all that .

Aaaand just now disassembling again I noticed that one of the long screws was broken, therefore the massive leak from the back. Now to hunt some decent 60mm screws...

The tube and grip support part are ok. It's the damn cylinder that's leaking. I disassembled everything again and now the cylinder doesn't leak from the front, but it does from the back... I even stretched the spring in the valve but the stupid thing won't stay closed when I put just a little gas in.

I finally found some time today to install Batmause's part, but the cylinder is still leaking. I took all the o-rings off, soaked them in silicon oil and reinstalled, but as soon as I put propane into the Angry Gun tube it leaks at the front...

That's very doable with 16:1 gears, a nice torquey motor and precise shimming. Add an electronic controller and a hop unit with no BB detection (ASCU+chamber maybe) and you are set. I have recently rebuilt my 2010 G&P M4 with 13:1s and a regular mosfet with brake and I'm going to repeat with the G&P XM177E1.

I received the Celcius Dynamic ECU today. After some trigger sanding (or microswitch would be permanently on) everything works as it should. The grip keeps being as it is, but AFAIK I'm the only one that has had this problem... If I were you I'd purchase the full Celcius gun, and at least it will be properly built and tested by Celcius. Don't let me experience discourage you.

Mine is still unreliable. I bought and installed a set of etiny stuff (Switch board, ECU and motor) in it after I received the package. - The gun keeps firing bursts when in semi. Holes in the sector gear are clean, but I think that the sensors in the etiny don't line up properly. Tired of this BS I've bought a Celcius ECU. We'll see how that goes... Switch boards are fine, and I've tried both of them (default and etiny). - When Celcius finally sent me the pistol grip, I found out that the holes don't match with those in the motor. The motor ones are 1-2mm forward. If I make them match th

$488 in their own website. Similar or the same in others.

I've used both. I started with the Celcius one, but since the metallic piece was gone, I installed the eTiny one instead with a similar part made of plastic. To make the screw stick on the magnet easier, just undo it a bit. The spring HAS TO be able to push it away with ease, or you will have a permanent non-fire condition.

Does your selector work properly? Mine shoots in semi most of the time but it jumps into burst sometimes. I've checked that the holes in the gear are clean, but it keeps doing it. Also, about the fire-stop, you want the spring to be extended enough to keep the screw from getting caught by the magnet all the time. The pressure from the magazine will push it up no matter how strong the spring is anyway. The whole little metallic flange there is quite a let down in an otherwise good design.

The links don't work as it is. They force you to download a webp content... Strange. Are you planning to produce these and sell them? My 870 developed an internal link recently, so I'm very interested.

I have a RA-Tech lvl3 sitting right next to me

The worst that has happened to me is that they don't have stock and many times they don't tell you until you query about the order.

Somehow I'm not surprised.

Hi there Rainer