Jump to content

BerserkDS

Regular Poster
  • Content Count

    633
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by BerserkDS

  1. Agreed, this shotgun system keeps getting worse....if they never made it with 6 shot mode, I'm almost positive the gun would work 100% better.
  2. So. Interesting news... Last batch of Marui M870s at my local shop ALL have feeding problems. We and 3 others purchased at the same time and the feeding it's either random counts or no feeds/normal feeds. We take apart one of them and see that Marui Changed the nozzle design. They've added a center needle like pin between the nozzles, to stop bbs from collecting and snapping the nozzle. BUT, I have strong suspicions that this is what's causing the terrible feeding issues. All other parts looked flawless and we couldn't not point fingers at any other part. Any one else have feedback on this
  3. I posted this in the news thread for the g&p adapter. There's a trick for it to hold more gas. Remove tube, fill. Insert tube. Then fill from the top valve on the adapter base. You can physically hear it fill. This should make it hold a considerable amount more gas. Haven't had time to actually do a shell count yet though.
  4. I think it's the opposite. Stuff breaks when you don't have emergency parts on stand by. When you're ready for parts to break and have spares, it almost never breaks lol.
  5. The gun immediately stopped feeding. Opened up the gun, and one of the posts on the side of the blade had snapped off. This was an early batch gun.
  6. Wtf? http://shop.ehobbyasia.com/eac-marui-m870-sga-tactical-magpul-custom-shotgun-gas-powered.html
  7. Is your gas tank and expanding? That's the main cause of the butt plate falling off very easy. On a not so expanded tank, it doesn't fall off easily. On a side note, I don't store my tank with gas anymore. Been going on 4 months of hard use on a new tank, and no expansion.
  8. Disassembled my original M870, and found that the lip for the faux bolt cover snapped, so now does not move. No biggy, but I figure the piece was moving around the inside causing the arms to lock and get stuck. Now racks and fires normally. I also checked the barrel and hop up, everything looked good and gave it a bit of cleaning. Now to test the range and see if its back up to speed.
  9. Just picked up a new M870, and first three things Ive noticed is that: 1.) The pump action feels much more rough that my original. Maybe they beefed something up internally. I checked two brand new ones side by side and both were equally as rough. 2.) The outter barrel is now a matte finish, no longer glossy. 3.) Gas tank is a smoother, glossier finish. Assuming they might have changed this so that the tank slides in and out smoother.
  10. Well I'm also having poor range. Same range from all three barrels. But now appears to have low hop. Maybe about half range now. And it literally changed over night.
  11. New issues with my M870. 80% of the time, after I fire, the pump will not rack. I have to shake the gun a bit and mess with the pump for it to rack again. Anyone know what may be causing this? Just so I have an idea what I'm looking for before I open up the gun.
  12. Anyone know where I can find a Nova or AS LDC kit in stock? Been looking everywhere..
  13. Anyone having issues with jamming? I have this issue where the bolt does not return 100% because of a poor bb load. I happens more frequently when I pull the trigger rapidly on semi. But I also wonder if its because the feed lips are extremely tight, causing the bolt to slow down and misguide the bbs. Either that or I'm scoring the bbs when loading them, which could possibly prevent them from rolling up the feed ramp?
  14. BerserkDS

    Guns

  15. BerserkDS

    nozzle

    From the album: Guns

  16. Also, I noticed my g5 came with a speed buffer type rubber already. Has anyone else received this on their g5?
  17. The rail is a little more bulky than I'd like it to be, I see what your are saying
  18. Busy how? Handstop kit for traction and m300 for illumination/disorientation.
  19. Just picked mine up, however I did notice one thing wrong immediately upon disassembly. The hop up bumper seemed to be rotated to the right a bit. i thought maybe the barrel has been rotated. upon closer inspection I noticed my hop up arm, the part that grabs the nub, had an an angle on it. I had to file it down slightly to fix it. Seems to seat better now, but definitely can use some shimming around the arm. has way too much play... Anyways, has anyone tried fitting the PTS SSG selector onto this? Wondering if it will fit...
  20. My Marui M870. -G&P Rail System -Surefire M300 W/ Gearsector mount -Magpul Handstop Kit -Laylax hard frame lock pins -Shell door delete -Custom Stippling on stock
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.