The Original SaXoN

Cheers dude, I'll do just that.

I wonder if anyone can help? I have a new Breacher, as soon as I load the mag into it, the gas leaks out inside some where. It's never been fired and the first mag had Abby 134a gas in and the second time I tried I used propane (as the 134 had run out). Never fired a shot, never been used.

I've recently bought a breacher, had it for about 2 months before I got any gas to test it, finally had a go this weekend and as soon as I load the mag the gas just escapes out of the body of the gun. Never fired a shot, currently it's a £300 paper weight I gas the mag and as soon as it locks into place I hear gas escaping inside, empting the mag in less than 2 seconds. I've heard people say they leak if you use Green gas/ Propane but I've not actually ever used it, any advice would be much appreciated.

Cool, thanks again for the advice, Id forgotten about the bolt catch. I've been airsofting for nearly 10years now and still haven't dared to open up a GB, now might be the time !

I'll try loosening it a little, I can feel the motor trying to turn when pull the trigger. I'm thinking of buying this http://www.uncompany.com/pageproductdetails.asp?prodid=30031 as a drop in (I'll drop the spring down obviously)? Would it be a good replacement ?

Bladerunner, apart from being a humours fellow you also seam to know a thing or two about the 416 DX's hence I have a question, as I have just received one of these bundle of joys myself. What mags work with this as my PMAG's don't and as lovely as the hand cranked mag is I shall not be using that on the field of play ? I'm also pretty sure my G36 mags wont work either ! Is it also common for the gear box to lock up too as mine has after about 4 test shots ?

Thank you all. I'm going to go for the Optactical pouches as I've not read anything bad about them as a company (feel free to enlighten me). Also I'm not sure whether to go for a Maritime CIRAS or an Eagle PC with Cummabund ?

Juat wanted to find out if anyone had found any MC G36 mag pouches as G36's, like MC are made of sechs and w1n ! Or what current pouches can hold two G36 mags. Ta

I always wondered what a 203 would look like and IMHO looks pretty good. Had an AG36 on mine and that looked good but it was a bit un-wieldy. 203 is now a viable replacement. Damm good looking 36 as well btw Akira

I have a stock para (internally anyway) and appart from breaking a lug on the piston head because I had it at the 'position 2' part, I've had no probs what so ever. I do suggest putting an o ring on the inner barrel to make it shoot straighter.

Not sure if this is the fault of the gun or the bat I used but I had my para spring set at the 2nd notch (pushed in) fired about 10 rnds and the battery cooked. I mean this thing was hot, totaly fubar. I've used the bat b4 on the standard setting with no problems. Put a new bat in and put the spring back to standard, not a problem. The bat was an 8.4V 3000mha. Any ideas ?

As a side note what sling are you going to use as you can't attach it to the point under the barrel as it's been replaced by the launcher! Or is there an attachment point on it (AG36) elswhere? Defo show us some pics !

Sounds like the best option for the bat would be to rewire it into the stock, using that G&P solid stock (think it's G&P)

could you post a pic of the 'block of metal' that needs modding. Might be able to come up with a differant 'fix' for it. Cheers

I had the STAR one and had no problems with it. It was, after a days shooting, bloody heavy / akward. Are they of a comparable weight and dose it fit th TM G36 without moding. I do miss my AG36 and th CA price is a lot easier to swallow if i decide to replace. Top review btw !

For all you UK Para owners or potentioal owners you need to get a 3/8 " O-ring to use as a spacer between the inner and outer barrels to stop it rattling and make it shoot as straight as a laser ! I know this has been mentioned before but the size of o-ring was in "american" 010 /011 I think warmonger said, over here in Blighty it's 3/8"

Wupjack your a legend, thanks for the help !

Cheers pal, just a quick thought though, that will be an imperial and not metric size?

I've not sure if anyone actually posted this but I know Slo mentioned that he put an o-ring over his inner barrel as a spacer and I think Staticzero may have mentioned what size was needed but I can't find that anywhere ( I might of imagined it ). What size o-ring will fit and act as a decent spacer between inner and outer barrel. Thnx