Jump to content

NonEx

Forum Regular
  • Content Count

    4,758
  • Joined

  • Last visited

  • Days Won

    52

Everything posted by NonEx

  1. NonEx

    Painted Weapons Picture Thread

    That was not meant to be interpreted as you make turds look good or your stuff looks like sh*t but me trying to say, you are too good at what you do 😛
  2. NonEx

    Painted Weapons Picture Thread

    I think even if I came over to your shop and took a dump in your paint cans you'd still make the stuff look awesome... damn you man! 😛 That blue Glock is on FIRE!
  3. NonEx

    Glock Picture Thread

    Well, gold is a bit to blingy for my taste but I get what you are going for. In that case your best bet is gold parts from the same manufacturer or having black parts from the same manufacturer refinished in "gold" but that will probably be very expensive.
  4. NonEx

    Glock Picture Thread

    Highly doubtful that they will be a perfect match (or even close) because it's different manufacturers and also most likely different base materials (aluminum/steel/pot metal) and coatings/coating methods. No way to tell how well they match up from just pictures. If you want the items matching as closely as possible your best bet is to find both barrel and spring guide from the same manufacturer in gold finish.
  5. NonEx

    Glock Picture Thread

    Without any first-hand experience with 5KU, I would say Guarder. Tried and tested brand that works and is well made, IMO.
  6. Not sure if this deserves it's own news thread really but I think this looks pretty cool from an OCD point of view 😛 Guarder are doing an updated more realistic/detailed lower frame for TM Glock GEN3 17/22/34. Complete lower with upgraded/steel internals and new style inner chassis (realistic slide rails, locking block, and, the part number (?) in the stamped in the frame edge! ). Oh and they are using hex-head screws now instead of Philips-heads 😛 Of course I wish it were for the Glock 19 series but should be coming soon enough hopefully.
  7. NonEx

    Guarder new TM Glock GEN3 frames

    Did you do a total weight comparison? Sounds like this new frame kit might be some grams lighter than the old style parts. Just wondering how much more "off" from RS weight you get with this setup. Not that it would keep me from buying and using this though 😛 Also the front chassis design is more realistic as the pictures show and you describe so getting rid of the old style full metal/steel chassi isn't really a "bad" thing per say. Except for the weight difference, if anyone cares about that.
  8. NonEx

    AR15 Variants and Derivitives Picture Thread

    Not exactly. I would assume it is since WE is RS compatible and VFC is "more" RS spec than WE and can also accept RS grips AFAIK. I put a WE HK416C grip on my last WE M4 build and got the grip from KY Airsoft and it was a drop in fit EDIT: Wait wha? VFC doesn't have a spring and detent hole in the grip?
  9. NonEx

    WE All new G series products

    Exactly.
  10. NonEx

    WE All new G series products

    Pretty sure the right side slide catch is just an ambi release in reality on the airsoft models to reduce friction and slide wear. It should work as a release, but the left hand side will act as both catch and release. Nothing to worry about really if you can release it ambidextrously. Meaning, if it were to catch on both sides, and you try to release it from just one side, the friction of both sides locking up would make it significantly harder to release and also cause more wear and damage to the slide. This is due to the materials used in airsoft and their durability and as you mention the flex in the ambi slide release design as well. Can't recall what gun or model but I am pretty sure I have seen exactly that on a previous pistol with ambi slide release controls. Only catching on the left hand side, but I could release it from both sides. My VFC PPQ or FNX maybe? (don't have either of those anymore so can't check).
  11. NonEx

    WE All new G series products

    So, it's the slide catch that is problematic, not the magazine release? 😛
  12. NonEx

    WE All new G series products

    Just what I was about to say 😛 That should make it flex in place. And then use a punch in the hole to get it out. Looks nicely finished and marked. Not sure I understand what you are saying about the magazine release though?
  13. NonEx

    Your Favorite C02 Handguns

    Cybergun/KWC Colts no doubt. They are so good for the price you pay
  14. NonEx

    Glock Picture Thread

    This is the German video (with subtitles) that I watched. Seems like there are a few improvements from the original VFC/Umarex Glock pistols.
  15. NonEx

    Glock Picture Thread

    Impressions? Saw a 45 minute German video on it and it looks pretty good actually. Not a fan of the 19X myself though 😐 Which store did you get it from?
  16. NonEx

    Marcus Ravera

    I've reported the post for you to a mod and asked it to be moved to General or Legal section. I don't know anything about the backstory on this but I appreciate people looking out for others in regards to scammers and bad business. It really sucks to end up on the wrong side of those types of transactions
  17. NonEx

    WE All new P-series GBB pistol

    Full size AEG F17 / WE Sig Sauer M17 with and without markings are now available at KY Airsoft. Black and tan. $90 USD for unmarked and $129 USD with markings. https://www.kyairsoft.com/catalogsearch/result/?q=F17
  18. Hello and welcome, friend
  19. NonEx

    WE All new G series products

    Airsoft Mike video overview of the WE G 19X.
  20. NonEx

    WE All new G series products

    FYI KY Airsoft have 5% off everything this "week", not sure what dates exactly. Discount code: "Flash Sale"
  21. NonEx

    WE All new G series products

    Video overview of WE G GEN5 and G 19X models.
  22. NonEx

    WE All new G series products

    Here you go, just posted by KY Airsoft. WE Glock 19X tan with custom markings https://www.kyairsoft.com/new-products/we-g19xl-gbb-pistol-tan-custom-cnc-marking.html
  23. NonEx

    WE All new G series products

    https://www.kyairsoft.com/catalogsearch/result/?q=gen5
  24. NonEx

    WE All new G series products

    Yeah I bought the KY Airsoft marking Sig Sauer P320/M18. Markings are nicely done. I think I will hold off until the official Glock replicas are released and the Sig Sauer ones. See how those look.
  25. NonEx

    Replica Surefire X300 flash light

    Since you are in the US I bet you can find a site with a good deal on a standard real model for around $200 USD or something like that. Could be a worth while investment vs. a $80 USD replica
×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.