hmg9194

The one from aggressor studio would do well, but any microswitch would do. Just look for the same design and it should work, can't find the link to the replacement everyone always says to get. If I were all of you though, I would seriously consider waiting. The PTS Masada Trigger and mosfet solution has finally arrived! Drop in replacement + mosfet system designed by our friend that used to run AWS. It's called the chimera and its built basically as a cross between the Extreme Fire Lion and the AWS Raptor mosfets (beast of many faces, IE a Chimera). It's the best mosfet around and they

Modify purple or element red both work without modification. A modify one is holding mine at 390 fps and 30 rps

Hey guys, just an update about my Masada. Got it fully upgraded finally and working, although I'm having bouncing issues that will soon be solved by some programming and an extra data module extreme fire is going to fix up for me. I run Firefox 11.1v 20c batteries, got about 4 of them so I don't run out. Got an AWS Pulse running it in without the green gear detection wire installed (for the sake of making it less complicated so I have a working gun until my SSR comes back to me. Element Red Ultra Torque Motor turns the RiotSC Revolution gears with modify bushings. I have a Modify pisto

Unless you are running the polarstar In this setup, you shouldn't get that barrel. Really nothing over 400 mm helps unless it's a gas setup. It's common knowledge that 6.03 provides better accuracy and range than 6.01, the quality matters more. I only get PDI, edgi or Prometheus. Mad bull if I'm feeling poor.

Buy a PDI W Hold bucking..

The nub is proprietary, but you can glue others in. They should make a massoud lower, I would buy that.

I painfully disagree, my SSR is putting shots out to 390' with it. It's just a matter of installing it correctly.

R Hop.... having it installed this week. Should be engaging targets past 350'.

I find it kind of lacking but after a new motor and bucking it's good to go.

http://www.everything-airsoft.com/blog/2011/05/09/iron-airsoft-gbbr-conversion-kit-for-magpul-pts-acr/ GBB PTS Masada? You jelly?

THe ARES Bearing spring guide works.

Dammiiiiiit lol now I am going to buy this modify set, guys think replacing the cylinder as well as the piston head would be a good idea? (i am using the stock cylinder and a Prommy POM piston head)

http://www.airsoftpost.com/product_info.php?manufacturers_id=29&products_id=25964 So that one instead?

I'm going to buy a Guarder V3 cylinder head since it has the double o ring design.

marui is good, but I'm not sure it matters. The problem isn't quality of bucking, it's lack of hop (the arms doesn't push down enough.)

It shouldn't I dont think.

Looks good but you better not be wanting fps over 400 or the performance of your bucking will suffer.

http://airsoftpro.cz/eshop/product_info.php?products_id=1522&osCsid=df11998010bc02c514f9e6595df2ea8b Buy that instead.

Wait wait wait. So the AUG cylinder head works? I think we have ourselves a completely upgradable gun now boys. (piston still has problems but yah know)

Hurrah! Got a piston working apparently! Getting shipped out tomorrow! Looks like airsoft this weekend (and I will give the details as they come)

I know lonewolf on asf would tell you to get the A&K over the PTS, as he has had both. I can't vouch for both but I love my PTS masada.

Doubt it, I don't see why he would for such a build.

For the gears, he sanded a -little- bit of the gear axles as they were incredibly tight with the bushings.

Now I just THINK you're trying to get on my nerves and make me repeat myself so that you can bash me again, therefore you may answer your own questions.

Tacitus, I'm just telling you what I was told. If you don't want to hear what I am told then take it with a grain of salt and move on. I am sorry he is so vague but I guess that just reflects the amount of work they needed. Little if anything, because he is usually very thorough in explaining anything and everything. Anakchan: 1) A little sanding, if anything. Like I mentioned earlier he has a way of dealing with guns that everything has to work PERFECTLY together so that is why he may of taken time to do minimal sanding where it wasn't really needed, meaning they work without modificatio