_Samuel_

I actually got Airsplat to get me the replacement for the KJW M4 CQB out of warranty. Also, sorry for being a dumbass earlier, this is the 2nd manufacturer defective gas blowback rifle I got right after the other gun I received. A better email to for KJW is: sales@kjworks.com.tw Adress it to Diana Huang and she will get back with you in a few days. Thank you guys for helping me and I will let you know how my KJW M4 CQB holds up whenever I receive it.

I wish I could ask nicely, but it seems like it is quite pointless. If you don't mind, T_Hum, I will send you a list of faulty parts.

I wish I could ask nicely, but assuming that they will do this every comment I make it is quite pointless.

I was wondering how I could get Airsplat to replace my KJW M4. I recently sent it back for repairs and Airsplat claimed to send me a brand new gun. I got it back and it was the exact same thing. The day after I got it back, after about 15 magazines the internals started failing, once again, but they were failing worse than before I sent it to Airsplat. Now I am out of warranty and pretty much hating the KJW M4 right now. I would just buy brand new internals, but on the lower receiver were the front pin is at, a chunk of metal snapped off after one careful disassembly.

I just wanted advice for my KJW M4 CQB but alright. Why not see if any other people with new KJW M4's that are the updated version have troubles? Well, YouTube is good for bashing how bad the KJW M4A1 is then. Maybe if you had a bad one you would understand how mad you would be.

Alright, but the more science involved and the principles of the gas laws it is easier to understand. I use a real firearm and break it apart and then be like "huh this gas blowback gun has some of the same components.." so it clicks. An AEG makes my head spin, I don't even want to disassemble the trigger box or gear box. I am just mad that this is suppose to be good and it sucks and everyone has been like it is your fault while it is either Airsplat's fault or KJW's fault for how easily thing is falling apart.

You guys just irritate me sometimes. I DIDN'T RUIN THE DAMN THING! It came this way from Airsplat and I didn't know this. They should of repaired it instead of just saying "it works." I know that they have the same revisions. The fact is the barrel length is the same, the rear sights are better, the CQB is lighter weight for the most part, etc. I mean like pros and cons between the M4 CQB and M4A1 systems such as examples of easier room clearing, tactics, etc. It is easy to understand and maintain it. It is even simpler than my UTG L96 in my opinion. I like the gun and KJW but still it sho

Johny you would be more likely to find the world end before I sold it for $50. I am out of warranty BUT I made the Airsplat representative shocked whenever I told him how bad mine was. I just wish this was the "most reliable" on the market and people can't stop saying user error, etc etc. There are manufacturer defects eventually in something mass produced. Get off my case people and stop saying I'm trolling. More than just say "oh it is your fault" give me some advice on how to fix it. I just used silicone oil and it is literally falling apart in my hands. Yes, I can buy pretty much every

Yes. I can't even turn it without disassembling it and the thing barely seems to not mesh together without force because of the feeding nozzle. Update: I called Airsplat and they were surprised I had KJW direct contacts and all the problems I am having with their "repaired" gun. I am getting back in warranty and getting a refund.

Sorry Frog, my camera sucks so I can't even get enough detail for Airsplat for some parts. If I show them that I think they will probably have to give me warranty with the bolt spliting with silicon oil all over it. I mean they messed with it last why the hell it break whenever I shoot it for like an hour and that was with time interventions? 50 magazines is nothing over a few days or weeks. Yesterday I was like "What could go wrong?" so I lubed it to hell and took the upper and just dumped whatever silicon grease was too thick. I couldn't get anything out of the trigger mech but it just seems

I have the manual in front of me but the trigger mechanism is failing to operate because it won't switch from semi.

Wow, I was going to but everyone needed to see how much my KJW M4 sucked compared to their KJW M4. Slipknot1971: Get permission from the retailer to take it apart so you or your team mates don't lose the warranty because there is no way. Mine is now shooting semi only and can't move from side to side to switch firing modes even with disassembly and it doesn't allow it to stay like that or the upper and lower receiver do not go back together! Brand new and this blows! The feeding nozzle cracked and the feeding nozzle has the spring bent to hell and another plastic part that fell out. I thi

I checked for anything I could see and I found nothing in it. It just seems stuck sometimes from silicon oil and the fact it might be a manufacturer defect since I have no clue what is going on with all of the burst firing on semi. I have had weird problems I stuck an allen screw into feeding lip where it went down the side since my camera is a piece of junk. Hope you guys forgive me for my "trolling" I guess. I am not that much of a noob with the KJW M4. It is just pissing me off to a hell of an extreme where I just stress over the fact Airsplat ripped me off, lied to my face, etc. I am

I have stress issues due to my old school. Just PM me I will tell you what happened if you don't believe me so be it. I was so stressed I didn't eat much and I couldn't because it gave me reflux and all sorts of other *suitcase*. NO I WILL NOT GIVE UP! I love the military and what they do and every military holiday is my favorite (other than Christmas and Easter) and we figured it out. The silver piece in the trigger mech randomly jams and doesn't cock whenever the charging handle is pulled back. It jams up somehow and then locks up.

Hm.. thanks for that response. I have been having problems with the trigger mech like I said and it only goes on semi and then doesn't allow it to switch. Then I have to switch between safe and semi-auto to get it to fire one round then it starts burst firing. I think it is manufacturer defect but that is me since it starts shooting three round bursts and fizzes out whenever it is about 92 F. Also, the feeding nozzle has a big gash like I showed you on the picture just from about 50 magazines. There if you want more information just voice chat me or something it is very hard to explain since I