Shabby

Hey all, I recently purchased a V1+ bolt from Cradle Airsoft after my v2 bolt snapped and have had issues getting the gun to cycle. I'm able to pull the charging handle all the way back with no issue but it is a little stiff when you initially pull it. When I pull the trigger, gas is released, the bolt tries to move back (usually only going at max an inch), the hammer is usually locked back again, and a BB is loaded into the chamber, but it does not fire the BB that was already in the chamber. After trying a few times (unjamming the BBs every time) I was able to get the gun to fir

Hey guys, I recently got a used GHK G5 and have run into an issue. The gun fired just fine until I hit a massive jam while going full auto. I had forgotten to secure the front end when firing (was trying to figure out how to fix the charging handle as it broke in shipping) I quickly realized what happened, secured the front end back on the gun, and tried again. However, whenever I'd pull the trigger, the gun would fire once, and the next time I pulled the trigger I'd hear a soft "thuck" and the gun wouldn't fire. I opened the gun up, and after a fair bit of poking around, I figured out

Really? I just purchased a falcon bucking and tightbore. Raven had mentioned liking the falcon bucking which is why I went with it. I'll try it out and see if I have the same issues.

Hey all! I just recently became a member of the family! I bought a used KJW and so far I absolutely love it! This is my 3rd GBBR in my shift away from AEGs. It's a V2 with a Noveske rail, Cradle velocity reducer, the TDC mod and I added the magpul furniture. I also have the falcon hop up and 6.03 TBB on the way. I had a few questions for you guys. There is a slight wobble between my upper and lower receiver. It isn't much but, but it's still annoying. Any known fixes? After adding a B.A.D. Lever, when changing mags with the bolt back, if I use any amount of force putting

That looks fantastic! What length inner barrel are you running in there and how does she shoot?

A possible easy fix I just thought of, is there anyway to put a spacer behind the negative end of the battery? I'm assuming one of the batteries is losing contact with positive connector when the recoil is forcing the spring to compress, which is why is turns off. Figure out a way to prevent it from losing contact, and you just saved yourself from having to buy another EOTech. Hope this helps.

No wobble what so ever. Though I couldn't tell you about the bayonet mount. I don't have any experience with either.

if you've never used Gorilla glue before you have to be really careful with it. It expands when it dries and will seep out through cracks. Just a friendly warning

Another quick noobie question about GBBRs, is there a break in period for anything in the G39? I know some people swear that TBB barrels have a break in period, as well has buckings. I haven't noticed any change with my KMP9, but then again, it's a CQB spray and prayer for the most part. The only issue I had with that was leaky mags. And I still have yet to shoot mine... Still waiting on my friend to get my propane adapter back... Tis torture seeing this thing just sitting in my room, begging to be shot.

Maybe the gremlins went on strike? Or perhaps they saw that I got a new gun and are on their way to my place. I mean, I got a lemon KWA SR-10, which I've had to drop another $100 into a $380 gun just to get it working again, and I still have parts I need to replace. (Had a bent gearbox in it, which caused tons of problems, but I only figured this out after the warranty ran out, and I opened up the gearbox to find all of the wear marks and a bushing in pieces.) Hopefully my G39 won't have any issues.... *death glare at gremlins.*

I'd love to have the new Idz stock, but I don't think anyone in the US has it yet. And I'm not about to spend $47 on shipping...

Sure thing.

My G39E finally came in, feels amazing. I can't wait until I can get my propane adapter back from my friend to shoot it!

Yeah, I was asking about cheaper scopes because I unfortunately don't have a limitless budget. But thanks for the input though. Also, I'm not familiar with the term "Dual Optic" Is that like an ACOG with a red dot on top of it? Pretty two separate optic systems in one? Or were you referring to an EOTech with a flip up magnifier behind it?

Hmmm, I'll have to look into it. I don't mind if it doesn't work with the G39, I'll just slap it on my AEG. Thanks! **EDIT** I'm looking more for a scope with adjustable zoom. I'm going to use the G39E as a DMR.

My G39E should be getting here on Tuesday! Also, has anyone had issues with their scope not holding a zero? I didn't think of the recoil when I ordered a fairly cheap scope for it, but it's a little late now.

Just put in my order for the G39E from Evike last night. I'm very excited. Now, over the past few days I've been going through all 47 pages of this thread and I just have a few questions: Seeing as this is my first G36, and everyone agrees that you should strip it and clean it, do you guys know of any videos off hand showing what exactly to clean? Or does it just break down like a G36 AEG and I just clean anywhere I see WE lube? I found someone's guide to a Teflon mod already in here (Thank you Kruck) Aside from the wobbling inner barrel, this cocking while in full auto (Shouldn't