-
Content Count
354 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Everything posted by TK4235
-
Initial Impressions of the TM SCAR-L Recoil Shock AEG System
TK4235 replied to AnakChan's topic in Rifles (AEG)
Can't believe the range on the SCARL... pretty good going for a standard out of the box Marui... FPS with hop on is about 305fps.. So onto the upgrades...???? 1. E6 M90 2. Prommy 6.03 TB> which length must I order? 3. E6 recoil spring That should be enuff to take it to bout 330fps I hope? -
Initial Impressions of the TM SCAR-L Recoil Shock AEG System
TK4235 replied to AnakChan's topic in Rifles (AEG)
Thanks buddy, i'll check the bay.. -
Initial Impressions of the TM SCAR-L Recoil Shock AEG System
TK4235 replied to AnakChan's topic in Rifles (AEG)
http://www.component-shop.co.uk/html/airsoft_li-po.html Oh it's from the component shop above... -
Initial Impressions of the TM SCAR-L Recoil Shock AEG System
TK4235 replied to AnakChan's topic in Rifles (AEG)
Hi Guys will the following battery fit in the ScarL 7.4v 2200mAh 35c 77A Continuous, 150A burst Size: 101.1 x 35.5 x 16.1 std 8.4v mini battery size thx -
Initial Impressions of the TM SCAR-L Recoil Shock AEG System
TK4235 replied to AnakChan's topic in Rifles (AEG)
Well, I figured I may as well join the club and i'm picking up my SCAR L tomorrow.. I went for the L, coz I have about 10 SOPMOD mags so that should save me buying new mags if I had gone for the H. Other than the looks, am I right in assuming that the L and the H's have the sasme performance out of the box? -
Initial Impressions of the TM SOPMOD M4 AEG
TK4235 replied to Gunfighters808's topic in Rifles (AEG)
Ah yes, Diamond files....have a packet of those lying around somewhere... -
Initial Impressions of the TM SOPMOD M4 AEG
TK4235 replied to Gunfighters808's topic in Rifles (AEG)
That reminds me, I have to slightly broaden the nub hole in my prommy barrel as the firefly hop rubber's fingers don't all pop through. I think there a 4 in total and only 3 are ever showing at any one time.. -
Initial Impressions of the TM SOPMOD M4 AEG
TK4235 replied to Gunfighters808's topic in Rifles (AEG)
I'm just runing a std marui nub and marui rubber.... Tried using the firefly rubber, but found it did not work inconjunction with the marui round nub. I'm waiting to get a flat firefly nub now..... -
Initial Impressions of the TM SOPMOD M4 AEG
TK4235 replied to Gunfighters808's topic in Rifles (AEG)
Hi Guys, ain't been on here for ages.... must be close to 6months! What have I missed? Has the EBB tech moved on yet? Any new developments? cheers -
Initial Impressions of the TM SOPMOD M4 AEG
TK4235 replied to Gunfighters808's topic in Rifles (AEG)
Don't laugh, but mine went flying across the room once, took me 30 mins to find it. Lol -
Initial Impressions of the TM SOPMOD M4 AEG
TK4235 replied to Gunfighters808's topic in Rifles (AEG)
Just make sure you have the right tools and you'll be away. Pay attention the the bolt stop mechanism, the charging handle and the blowback mech. Also when you do take the gearbox out of the receiver there is a little spring which is held in place by a Philips screw. Be carfeful when you unscrew that screw (lol) the spring is kinda under tension and it may fly off never to be seen again. -
Initial Impressions of the TM SOPMOD M4 AEG
TK4235 replied to Gunfighters808's topic in Rifles (AEG)
IMAX B6 lipo balancer charger. Super bit of kit and only about £30 -
Initial Impressions of the TM SOPMOD M4 AEG
TK4235 replied to Gunfighters808's topic in Rifles (AEG)
Honzo, it's easy to take apart, more so than a conventional AEG as the spring is not under tension. There is a super eagle6 takedown video online. I followed that video the first time I took my sopmod apart. You will need the right tools though, a sopmod spanner and a torx screwdriver a T10 I do believe and some Philips. -
Initial Impressions of the TM SOPMOD M4 AEG
TK4235 replied to Gunfighters808's topic in Rifles (AEG)
Honzo it's possible you may have some premature wear on the piston teeth or even the main gear. But before you take it apart does it misfire with all your mags? If not then its a mag problem perhaps? Check your mags for feeding problems....Also do you clean your inner barrel regularly? I suspect there is a gear problem as the gun may not be recycling fully. The easy fix is to take the gear box apart check all your gears and piston teeth and also check that the Tappet plate is not bent or worn away. If it looks fine then put it all back together and make sure the sector gear is seated In th -
Initial Impressions of the TM SOPMOD M4 AEG
TK4235 replied to Gunfighters808's topic in Rifles (AEG)
Yale door key... now there an idea.... I'll give it a go... good thinking TK.. -
Initial Impressions of the TM SOPMOD M4 AEG
TK4235 replied to Gunfighters808's topic in Rifles (AEG)
Tried a steel rule but did not work.. and yes this one has loads of red loctite... Even getting the castle nut off was incredible... so much loctite on that too May try an allen key like Akira...hoepfully I have something that does not flex..... -
Initial Impressions of the TM SOPMOD M4 AEG
TK4235 replied to Gunfighters808's topic in Rifles (AEG)
True, true, true.... but half the fun is tinkering..... and then figuring out why the hell it stopped working... On hindsight, I shud have kept my SOPMOD as I tinkered to death with it and the idea was to leave the SOCOM stock.... but now SOPMODLESS, I just could not resist the urge to take the SOCOM apart tonight..... -
Initial Impressions of the TM SOPMOD M4 AEG
TK4235 replied to Gunfighters808's topic in Rifles (AEG)
Well I decided to upgrade the stock SOCOM this evening... figured I could do it in 35mins flat!!! boy was I wrong... took 60mins! lol Out went the stock TM parts and in went 6.03 pommy barrel, pommy aero cylinder head, pommy piston head, pommy piston, pommy cylinder, pommy spring guide and an eagle6 M100.... Shooting about 338-346 fps so happy there...... Managed to blow the fuse though, so have to look at the motor and see if the wires are shorting out somewhere.... Right.. question... how do I get the bloomin recoil end bit off the stock tube... I tried using a steel rule but th -
Initial Impressions of the TM SOPMOD M4 AEG
TK4235 replied to Gunfighters808's topic in Rifles (AEG)
Richard, just seen your video of Tom's SOPMOD... 347 - 348 fps... nice I may just bite the BB and send you my SOCOM on reflection now.. -
Initial Impressions of the TM SOPMOD M4 AEG
TK4235 replied to Gunfighters808's topic in Rifles (AEG)
True, it's easier to tinker with the EBB gearboxes... lol -
Initial Impressions of the TM SOPMOD M4 AEG
TK4235 replied to Gunfighters808's topic in Rifles (AEG)
Dur, try a marui sopmod or socom and you will know what the passion is all about. Surely a clone can never compare to the deal. -
Initial Impressions of the TM SOPMOD M4 AEG
TK4235 replied to Gunfighters808's topic in Rifles (AEG)
Talking of PMAGS, I'm doing the same with my Systema. I'm replacing the systema stock mags with RS PMAGS so I agree we do need PMAGS for the Maruis . Time to start a facebook campaign lol -
Initial Impressions of the TM SOPMOD M4 AEG
TK4235 replied to Gunfighters808's topic in Rifles (AEG)
This SOCOM is stock at the moment, i'll have to crack open the gearbox anywayto change to the main spring anyway... It's still annoying that this happens on a stock gun though.... -
Initial Impressions of the TM SOPMOD M4 AEG
TK4235 replied to Gunfighters808's topic in Rifles (AEG)
what I don't understand is why on semi it got stuck and I had to put it in auto to recycle the gearbox? -
Initial Impressions of the TM SOPMOD M4 AEG
TK4235 replied to Gunfighters808's topic in Rifles (AEG)
7.4v 2200mah 20c lipo. Surely it can't be the battery?