Jump to content

mrsevenstars

Regular Poster
 View Profile  See their activity

  • Content Count

    105

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by mrsevenstars

  1. mrsevenstars
    Ive also used ksc .3g bbs for a while, a couple years back the consistency in quality started to go downward and seems to not have gone back up. I saw alot of nubs and flash on alot of the bbs. It was especially noticable in the accuracy as initailly i thought the gun was the culprit until i used the bbs in multiple guns and types. I also swapped over to the bb bastards and never looked back.
  2. mrsevenstars
    Thanks for the hop cut info i was actually a bit more curious if the outer barrel was the same diameter all the way through or if they made it smaller after the after the end of the inner barrel that would prevent putting a longer inner in as it wont pass through. I recall having that issue on my tm mp7 or something. Sorry if i wasnt as clear.
  3. mrsevenstars
    Bada bing, great review man! Ive noticed the inner barrel looks alot shorter than the outer barrel, does it look like we can put a longer inner barrel or is it stepped with a lip at the end of the inner? Seeing yours makes me impatient for mine. Haha.
  4. mrsevenstars
    I know this is a long shot but does anyone have a shooters design slide for a KSC Mk23 they wanna sell? Phase II or III is fine. Even a complete gun and slide is fine. They seemed to have dropped off the face of the planet.
  5. mrsevenstars
    It was a drop in kit but the front sight was SUPER TIGHT. Be sure to have a nylon drift punch handy.
  6. mrsevenstars
    I had a "upgrade" hammer spring by SAPH, it ended up being softer than stock so i tossed it. Im not sure if mine was a fluke, im curious to know how the m&p springs are.
  7. mrsevenstars
    Ah thanks. Good to know, I think ill just make some shims.
  8. mrsevenstars
    Has any of you tried the nineball gas routes in these guns? Been thinking about it but wanted to see if you had any experiences with it installed.
  9. mrsevenstars
    Lol. I know how you feel. Ive had some head scratchers. I dont have a threaded barrel to compare with your results though.
  10. mrsevenstars
    The threaded barrel? Wow! Is the inner barrel really tight in it?
  11. mrsevenstars
    No im only using the UAC trigger bar. I wasnt gonna use the other uac parts until some of the stock parts fail. Although on one of the guns (det costa slide and uac trigger bar) im at a little over 2k rounds without so much as a hiccup so if something does fail i might just source a oem replacement as the aftermarket counterparts seem kinda tempermental. My other ones just have detonator slides but otherwise stock. The g17 hammer spring fits? I only have the stack 130% that i havent installed yet.
  12. mrsevenstars
    Keep us posted. Hope you get it sorted man. When they are running smoothly they are GREAT guns.
  13. mrsevenstars
    It gets stuck on the rearward motion or the return motion? If its on the rearward motion back to battery a recoil spring may help, if its having problems on the forward motion a recoil spring will probably compound the problem as its definitely dragging badly on something. Maybe swap back to oem lower internals? Ive been using stock internals except the trigger bar on one of the guns without a real issue. Is your inner barrel oem length? I remember having a capa with a long inner binding because of the way the inner and outer barrels moved during cycling Hope you can get it sorted man
  14. mrsevenstars
    If you have time you might want to take a side profile pic of your lower with the hammer down. Might be able to compare it with someone with a stock set up. It really looks like something is dragging. How does it shoot?
  15. mrsevenstars
    Are the hammer components stock? It kinda reminds me of one of my old glocks that the hammer sat too high when it was locked down by the sear so the bbu dragged on it.
  16. mrsevenstars
    Yeah a standard tm g17 upgraded recoil spring. I am using a guarder in one and a SD one in the others. The recoil spring guide is the same~ish diameter and length as the 17. The recoil spring helped "force" the gun into battery as sometimes id have a little resistance and the gun wouldnt fully reset into battery after the shot.
  17. mrsevenstars
    Cav I also had one of them kinda let the BBU misalign in the slide so i have to remove and reinstall then i cycled with the stock recoil spring. I also use a glock upgraded recoil spring now in my m&ps and the cycle fine. Hope that helps and you get it sorted out.
  18. mrsevenstars
    Did you fully tighten the allen screw that holds the faux extractor? I noticed my guns performance is alittle wonky if the extractor cant move freely. I usually go a turn off of full tight. I had this on all of my detonator m&p9 slides
  19. mrsevenstars
    Ok thanks bud.
  20. mrsevenstars
    Ahhhh. Ok thanks for the heads up. Looks like ill be on the hunt for OEM nozzles. Where do you guys order your spares?
  21. mrsevenstars
    Has anyone tried the Gunsmodify nozzle? I bought one as a spare but wanna know if i should just source an oem as a better replacement.
  22. mrsevenstars
    Ok thanks man. Now i gotta go get a 5-7 inner barrel. Lol.
  23. mrsevenstars
    Anyone put a slightly longer inner barrel in theirs? Does it use the old style or the newer style as seen in hk45?
  24. mrsevenstars
    It didnt really cut that much on the trigger gripes, the trigger feels SLIGHTLY smoother. Its not a drastic difference at all.
  25. mrsevenstars
    Deltazero Ive installed the 10-8, oem style, and atei Detonator slides in my m&p9s, as well as the UAC trigger bar without a single hangup. Im thinking it is your UAC hammer and other aftermarket internals causing the issue. Please let us know if they were the culprit as i was thinking about buying it also. Although i had one hiccup on ONE of my detonator slides as the steel piece by the slide lock area was warped so i had to file a little to fit. Also the fake extractor is made to move and function so maybe that could be something to look at also as i noticed if i fully tighten the
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.

  I accept