Tisane
-
Content Count
104 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Everything posted by Tisane
-
Those two rectangular holes towards the front of the frame I'm sure aren't there on the plastic frame so I'd say that's where the new inner barrel/hop assembly will secure. It also has to come as a complete kit because it won't work at all with one or the other. Wonder if it will be a reasonable price like most of VFCs upgrade parts......fingers crossed.
-
You were saying? Ready fighter metal inner shell for VFC MP7
-
Now those outers look SWEET, certainly on the list along with a slightly longer inner barrel. I managed to sort it last night with the aid of a shim 8 had off the flashider of an M4, it's pretty sturdy now but with all the fiddling around the threads on the sling loop are mangled so I need a new one of those. I would have left the sling loop out but without it the flashider screws on so far that the lugs touch the front sight and it looks stupid.
-
One converted MP5k into a PDW Good bit. Mixed feelings about it however. The stock is as solid as a rock! All steel locking/folding mechanism and steel lining at least half the way into the very solid plastic stock so I don't see any amount of rough airsofting damaging/breaking this stock. Bad bit The new outer barrel is a very poor design indeed. The old one has a very defined cutout in the front end of the barrel itself to accommodate the front sling loop as shown below Now the new outer barrel looks like this out of the box As you can see there is no cutout for the
-
No I don't think it will come either personally, but we can hope
-
Not that it matters as that warning/copyright paragraph is removed easier than Brazil from this years World Cup. Surely the power up silencer can't be much heavier than the VFC one, it doesn't make it front heavy, however it will make you paranoid of catching it on something and destroying the inner frame, my silencer is a shelf queen until a metal inner frame is produced. On the subject of upgrades what do we think of these? http://www.wgcshop.com/wgc2008/main/product_detail1.php?search_From=searchItem&item=APLUS-RV-VFCMP7&search=special&rs=VFC%20mp7&catid=&cat=&
-
Milspec Solutions Shocking customer service
Tisane replied to Philbucknall's topic in Sites, Retailers & Events
It's a simple *fruitcage* mistake, my auto correct came up with both spellings and in a rush i selected the wrong one. SHOOT ME!!!! -
Milspec Solutions Shocking customer service
Tisane replied to Philbucknall's topic in Sites, Retailers & Events
Really? -
PDW conversion on the way
-
Milspec Solutions Shocking customer service
Tisane replied to Philbucknall's topic in Sites, Retailers & Events
I've been watching his ranting and raving on FB for quite some time, Phil you are not the only one to get onto the wrong side of his awful attitude. I brought a Scar from Milspec quite some time ago now (coincidentally the last time I've ever used Milspec) and it was "adapted" and pre fitted with an RA-tech NPAS to keep it below 350fps. Only the "adaptation" actually further lifted the FPS rendering the NPAS useless as it actually wouldn't adjust below 340-350fps meaning that the slightest temp increase bearing in mind I brought it just before Xmas would render it useless, and due to the -
Stupid question alert.....have you taken it out and turned it over? Mine is blank on one side.
-
PDW conversion kit for VFC MP5k[emoji3] Sent from my GT-I9505 using Tapatalk
-
VFC just love taking my money!! Been waiting for this since its release. Sent from my GT-I9505 using Tapatalk
-
It may look complicated as 95% of its working/moving parts are on the outside of that inner shell, only the hammer, valve knocker and trigger spring sit inside the two halves, however it only took me 10-15 mins to get it to that state, slightly longer to reassemble as the bloody springs are a PITA to get into their right slots, one thing with taking it down to that level you just have to be methodical and lay everything out in order, keeping X spring with Y part as I think all of them are different diameters and/or lengths. Its so easy I could have kicked myself for not doing it before L2E ma
-
Mine only has one marking on too.
-
Now I know how to change anything inside this baby Interesting hop rubber inside mine though, seems like the nub that keeps it secure when the two halves of the hop are together has been cut off, however there is a cutout in the hop to accept that type of hop rubber. And this is the very first time it's been completely stripped since I received it.
-
He's only gone and done it...lol
-
Well I haven't seen anyone compare the two yet, but on the recoil side of things, the recoil on mine was enough to turn off two different Eotech replicas, thought I was going mad or my batteries were going flat, until I fired a 4-5 round semi burst and it just turned off, took the one off my MP5 and the same thing happened with that one...lol Gave up in the end and used the irons through the turned off Eotech.
-
I would be the 1st to jump all over an upgraded version, whoever makes it. It's just one of those niggling little things that let's down an awesome little gun.
-
That my friend is a stroke of genius!! Going to get on that later tonight
-
Ahh now I think I know where you are going with this, correct me if I'm wrong. No, on the VFC MP7, manually activating the bolt hold lever with the magazine out won't lock back your bolt. However that I believe is down to an oversight of some sort when making the lever itself, as if you strip down the gun just to the inner shell and reinsert the bolt hold lever it does move the bolt lock on the inside perfectly well, however if you reassemble it, then it doesn't work. But if you remove the one side of the lever and pull the rest out just past its recess and then activate the bolt hold wi
-
Another absolutely storming day today from my MP7, used for 99% of an entire day and 100% issue free in around 500 rounds.
-
My slide sits on the frame as tight as a ducks chuff, but mine is still probably just under 500 rounds old. But those 500 rounds have been used to free off my slide as it point blank refused to fully return forward. What is it with VFC and using *suitcasey* weak recoil springs, my MP7 needed a better recoil and nozzle return spring to work well, my M&P9c has a poor recoil spring and now the G19, because the slide is quite tight the recoil spring has a hard time returning the slide fully, although its freed up quite a lot now, I still want a better spring. Out of interest I put the 15
-
Scrap that, after half a can of Colemans and racking it like I'm tommy tanking on speed for a few hours it's just about loosened up enough to return fully without getting hung up, I think a Guarder recoil spring is in order however just for that extra finishing touch.
-
Ok then so mine arrived this very afternoon. Liking it a lot at the moment, the external quality really is as good as I've heard. However I'm having one small problem with it, when I fire it the slide won't fully return, it sits about 5mm from full forward, a slight nudge and its fully forward, but no matter how the slide moves be it manually or fired it will always return to that point 5mm from fully forward. Oh and it's only with the metal barrel installed. Anyone got any ideas, or even better had the same issue and sorted it? Sent from my Lumia 920 using Tapatalk.
