Jump to content

Zereck

Regular Poster
 View Profile  See their activity

  • Content Count

    650

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Zereck

  1. Zereck
    My experience with the UAC nozzle and piston head wasn't so good. The latter is ok but I lose around 20 FPS, while the nozzle makes the gun less snappy(don't know if it needs a break in). Also Boomarms still owes me a Detonator VTAC sight. :/
  2. Zereck
    The front nub was stuck downward thus BBs rolled in without stop had to file the sides a little. I will try teloning here and there first then we'll see. I did overtightened the mentioned screw tough.
  3. Zereck
    So I have constant double feeding now with all my mags not sure what to do. Also all my mags leak at either the screw next to the fill valve or the loading valve which connects to the gun's tank. What size of O-rings needed?
  4. Zereck
    I noticed that after inserting the magazine in a few times that the magwell rail slowly chips material off of the magazine. There is black residue on the rail and it's visible on the mag too.
  5. Zereck
    Did you change the motor(seems like a High Cycle one)? What's the performance with it? Sektor gaer iz hueg!
  6. Zereck
    Did you disassembled it recently? A reassemble might help. I put a shrink tube on the lever (on the part) that contacts with the mosfet as it wasn't working right for me before. I have also noticed that in very cold weather (0 celsius or lower) the bolt stop would not work for me pre-mosfet. The small alloy levers might change size slightly in the cold which causes the problem or so I am thinking.
  7. Zereck
    People claim that the BBs in wide bore barrels are less prone to hit the walls and bounce thus lowering accuarcy than in tight ones, however others say that it mainly depends on the quality of the bore and can achive good accuarcy with tightbores too. I ordered mine from WGC since I had credit there but they haven't seem to got it yet. Also their shipping cost blow.
  8. Zereck
    FPS seems to be at 250-260 on some of the videos, which is lower than usual, but it's probably due to the longer spring/weak motor combo. There is a short video about the range: Seems it can shoot about 50m but the spread gets really big at that range. Which is fine, it is a shotgun.
  9. Zereck
    They are you just need to cut part of the extension to not interfere with the hop-up entrance.
  10. Zereck
    I have an issue where my mag won't feed the BBs because the protruding part on the top of the Hop-up unit doesn't push up the mag's lever(which keeps the BBs inside) enough.
  11. Zereck
    I'll only get my M&P at Christmas but I have a custom Kydex holster for my TM HK45 with Detonator slide which I have been using constantly for over a year now. It still doesn't have a single scrach to this day.
  12. Zereck
    I skirmished it last weekend in around 5-6 celsius and had no problem with it. Just don't do full auto dumps.
  13. Zereck
    One of my magazine stops feeding at about half-way. Don't know why, if I remove the magazine and press on the small lever that keep the BBs inside it still let them out.
  14. Zereck
    Im still trying to get a steel buffer but the guy doesn't have any in stock. And Ramjet valves still have not been restocked.
  15. Zereck
    It's not just the sealing rubber but the magwell is stupid too. I now don't dare to load more than 20 BBs because the spring jumped out so many times.
  16. Zereck
    Got mine today tough I could only dry fire so far, I really like it. I did notice that unless you pull the bolt back all the way then let it slam forward then the bolt won't go all the way forward thus no sealing.
  17. Zereck
    Yeah happened to me two times now and at the first one I didn't notice it before slamming the magazine inside my pistol which made the spring unusable. :/
  18. Zereck
    Those go on the sides of the gearbox close to the buffer tube. It is there to prevent any movement of the gearbox, tough they fall out easily when you remove the upper.
  19. Zereck
    Oh yeah after trying for a while, I reread your post and finally managed to get it in place, so it did help.
  20. Zereck
    New valve knocker finally arrived so I could reassembly my hammer group and also fix up my magazines. And boy figuring out all the springs was a pita, especially the putting the hammer spring back in it's place. But now my pistol works again and it won't ever break ever again!
  21. Zereck
    Looks broken to me.
  22. Zereck
    So I disassembled the hammer assembly and took a look at the valve knocker. Im not sure but it seems the spring that is located on it's middle part seems broken: Do I see it right on NonEx's picture that the spring is longer and it is being hold by a small extension on the lever?
  23. Zereck
    Ok so I was checking my valve knocker inside the magwell while pulling back the slide and then pulling the trigger. I found that sometimes the valve knocker won't move out all the way from it's ready position sometimes it only goes halfway and it also seem to get stuck do one side. When in those position it would not reach the magazine of course which cause the light striking. Now to find out what is causing it. Unfortunatelly I probably will have to disassemble it.
  24. Zereck
    Well I was thinking about the hammer spring mainly because a lot of people complained about their HK417 gbb(VFC too) not having a strong enough hammer spring when using propane and I was using propane in my pistol(it was also pretty hot 30+ celsius) when this started happening. Now it seems to work normally again(with my only working mag). Im curious about the valve knocker tough. Mine seems fine could anyone get a picture of their's? Just by looking into the magwell.
  25. Zereck
    Mine is a second batch tan and has the laser engraving. When I first got it the texturing on the grip hurt my hand too, but over time it lessened due to useage. I still don't know if I can get a stronger hammer spring, the light striking seems so random too. I disassembled one of the mags and when I tried to reassemble I accidentaly snapped the sealing rubber. Which is actually pretty easy to do and a PITA to place in correctly while trying to screw the bottom back on. NonEx I tried to take a picture of the spring but it's not easy without taking slide rails off: If I see it goo then i
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.

  I accept