Zereck
-
Content Count
650 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Everything posted by Zereck
-
Well I asked VFC about the RAL8000 version side rails and it turns out that only the Asia version has it, the European doesn't. Umm F you Umarex?
-
Initial Impressions of the TM SOPMOD M4 AEG
Zereck replied to Gunfighters808's topic in Rifles (AEG)
I had a non-functioning bolt stop at my first install of my Spectre. I disassembled the gun and put a bit of shrink tube on the lever to make sure it pushes the switch, just to be sure(tough according to BlackTalon the switches need minimal push so it might be not needed but then again I have a custom recoil weight and it really kicks the gun around). After that it worked well. Before the Spectre it happened a lot of times that the bolt catch would not engage at certain times. It seemed to me that when it was cold the bolt catch would not work most of the time as when I got home the bolt catc -
I assume by return spring you mean recoil spring which I already want to buy in the MP7 it's just out of stock. The 417 tough I don't know if any of the m4 springs or buffers are good in it as the 417 buffer is bigger.
-
So I just bought the RAL8000 version from Landwarriorairsoft and it didn't come with any side rails even tough it should according to WGC and Ehobby pictures. Did they remove it from the european version? Anyone else bought this version? I also asked LWA but didn't receive a reply yet. As for the gun: - 1:1 size is nice and so is the coloring, the plastic while looks better than the Marui first it has a lot of errors when you look closer. I already knew about the plastic barrel and internal casing so it didn't catch me off guard, tough I hope we eventually get a metal replacement. - the mag
-
So last game the fake pin on the right side of the lower receiver fell off and only noticed it at home(I have a custom recoil weight and it shakes the gun apart slowly ). Is it possible to buy it alone or I have to buy a whole lower?
-
So the mag I tought I fixed started leaking again. Any idea where can I get a sealing rubber for the bottom plate?
-
I noticed after some shooting there is some kind of white residue(no not that one) left on the hop-up entrance and near it. At first I tought it came off of the BBs but didn't really look like plastic. So after game my magazine started leaking which I tough I fixed and when I took a look inside the magazine I found that it is full of the same residue/dust. Can't really tell if it affects performance but it is annoying to clean off constantly.
-
So far I tried two hop-up rubbers: installed the Maple Leaf one first range was good but grouping was random and it didn't improve after hundreds of shot either(so it not a breaking in issue). I was kinda disappointed since I got the same rubber in my TM HK45 and it works there perfectly. So next I installed a Modify rubber, grouping instantly become much better. Not sure about the range yet since I could only shot in my backyard so far.
-
Probably Kriss just want to make its own Vector through Krytac. Some guy on the KWA Kriss Vector group claimed that he talked with Krytac and they are coming out with a Vector...AEG.
-
Taking measures on my breacher it was 51.5mm between the two pins(from center to center of the pins).
-
Initial Impressions of the TM SCAR-L Recoil Shock AEG System
Zereck replied to AnakChan's topic in Rifles (AEG)
Stock button broke on my SCAR-L once. It's just a small screw that goes in a small part of the button which isn't made out of a strong plastic unfortunately. If you want to look at it positively you can say that TM faithfully recreated the real steel stock(which was also infamous for easily broken stock buttons). I have a SCAR-H too but I never had other problems. -
Samoon enhanced recoil kit: it does increase the recoil but lowers the RPM. Since I don't use full-auto on skirmishes Im fine with it, so its your choice. Hop Upgrade: First you should file the feeding lips on the magazines, so the BBs move in-out more easily. This also lowers the chance of a double feed/misfeed which could damage the hop-up. As for upgrades, the default hop works ok, one thing you have to watch if you switch rubbers is the lenght of the rubber's lip. Too long and it might cause jam/misfeed. There is also the A+ hop-up conversion, which I have heard mixed results of. Some g
-
Two of my magazines just started to have their FPS jump around. In both cases the gas router was faulty by not having good engagement with the nozzle's router. What causes this and can it be avoided?
-
It is CW. Is there even a CCW 16mm thread on any gun?
-
I have this and as I mentioned before it works perfectly(bright and keeps the dot in place after 100s of rounds). There is another RMR on Samoon's site which it claims to be "shockproof".
-
Actually on the kwausa forums they are saying that there will be no more Kriss. At least from KWA.
-
I bought this too. It still holds zero after around 400 rounds and pretty bright. But when you buy from ebairsoft it is kind of a lucky dip. You might get one that works right or a lemon. Edit: is the ACE1 really and different? Seems like it's completly the same. Is it better internally or you just have a better chance getting a good one?
-
Here is mine:
-
I noticed a few things about the magazines. The magazine that came with the pistol as I mentioned doesn't have the part which holds the spring in place(tough the spring won't come out unless you directly fiddle with it) unlike the 2 othe magazines but it also doesn't have an o-ring on the charging valve while the other 2 does. It's easier to spew the gas but it is also faster to charge the o-ringless mag as far as I noticed. What is intresting tough is when I was shooting the original magazine and the additional magazine the latter sounded louder.
-
I have a Maple Leaf 60 in mine, works fine. On the other hand when I tried to install the Modify rubber I have found that it is too big for the chamber and won't fit.
-
Well I managed to fix it by gluing the rubber against the magazine's wall where it is supposed to be. I had to cut off a bit of the rubber where it was tore as it become stretched. Fortunately it doesn't leak anymore.
-
So I finally got my pistol on Christmas. I also bought 2 additional magazines. Two things: The mag came with the pistol on its bottom doesn't have a spring holder unlike the other two. One of the two plus magazines was leaking at the bottom. So I took it off and this is what I got: Great assembly there...
-
Aye I did. Also I changed the O-ring on the nozzle. It gave me much better consistency tough also increased the FPS(starts at 420).
-
Well I bought a new BCG because I managed to brake some parts on the previous one while disassembling it. But I still get double feed/misfeed on full-auto. I still think its just too fast. Not that I use anything but single while skirmishing, but still...
-
Well I replaced my hop-up rubber with a Maple Leaf 60 degree one. Again its good on semi but on full auto it just misfeeds/doublefeeds.
