-wigs-

Does anyone know where to get just the pistol grip they put on the newer 416? Prob wrong topic but I need one as its the closets grip/angle to my rs and gbbr bcm gunfighter grip

As promised I trimmed the sides off the switch and wedged it into a 45 position The night evolution light is pretty nice all around and bright

ill have pics up in a few minutes but i just got one of the ne mini scout lights and there sf dual switch, it works like my real one i have on my rs ar and so far i love the quck disconecting plugs they use. personaly id say go for one, they have both the single wired one and the dual wired one which works with my vfq peq and the mini scout light. oh and every night evolution light is an element light with better bulbs. says element right on the bx

I've found the t1 with the high mount is the perfect height for both reg playing with glasses and using a mesh mask. The high mk18 mount I had with my comp2 was barley high enough to use with a mesh mask and that's a tall mount...... Finally finished my mk18 last night, pics later, expect artsy ones cause Ive been drinking lol

Out of context sorry but is that the tmc 6094

Yeah I'm thinking next/ current aeg build I'm using a newfangled slim rail

And even more Of a reasOn Im digging these slimmed down rails, I run a double switch for both my Peq and mini scout right where your running the switch for the Peq. You seem to be able to almost fully wrap your hand around that rail, I have to reach over to actuate my switch when shooting lefty. Kinda strage at first but it's like any overly wrapped magpul grip

Nice lmt. Ive made a point to stop drinking beers and pulling out my guns. I end up with random configurations and polished glock slides lol

I will say the element ones are damn bright

I was asking cause in the process of getting a double switch I bought the crusader ambi selector

question, are the ksc selectors a drop in fit?

I'm realy digging these " slimed down" rails

Is it an older m600c? Mines held up fine and it was on my vfc I beat the ###### out of

So at the moment my angled scout mount is stuck to my gun. I just got tired of not using it cause the stock threads stripped and pretty much took a slightly fatter screw and literally threaded the slot in the rail itself. Stripped the head and am to lazy to take a dremel and make a flat head cut. So the laser in my Peq slightly clips the scout light but is still dead on. My question With or without the Peq

Does the burnt bronze have some metallic to it like the finish lwrc uses ?

And I love block 2s and any fde/ brown finish. Half the reason I own rs costa larue

Yeah the can is the madbul sf mini 5.56. I actually just ordered a crusader mb556 flash hider. From what I can tell the ball bearings in the can might match up perfectly. If not I'm going to drill the other two holes to make it work

MRF how hard was it to do? I've been wanting to do it to an entire sr635 I have and eventually my lm4 just never knew the process.

Does this count. Just got the milspec moe stock and painted it to match Kwa lm4 mk18 mod 1

Just my trusty kjw g23. Been a work horse with zero problems since I bought it 2 yrs ago. Sanded and stippled frame Painted to match my ar

yep ear plugs, ive never used them but ive come close when there are constant thunder bs going off.

you know now i need to go mess around with my peq, i like it where it is now but for how i run the switch for my scout light i can hit it fine with my support hand shooting from my strong side (righty) but i cant for the life of me hit it running the other shoulder without reaching over the peq. too far back and the lazer hits the corner of my front sight, too far forward and i cant hole the weapon the way i like. i took some vids down range to see the change in tone with and without the foam filled can and there is definatly a difference, ill upload them later and post them up

I took mine apart the first day, cut the inner and put it all back together. It's shot perfectly with .25s, haven't even touched it once.

i tried cooking it on a stove before painting it to see it i could just get it to acctualy burn but it was no dice even after getting almost red hot. so i just painted it with a bas or tan krylon and dusted the tip evenly around until it looked "burned". i think it came out pretty good. as for the stippleing, i did it to the stock a2 grip after sanding the finger nub that alwyas just seemed to cramp my hand after extended use, did the same to my kjw glock. now i just have to stipple all my grips cause i love the feel.

Yeah just for giggles, I used to have a glow stick on my other stock. It's the little things. Next is a bcm gun fighter grip, it came but I have to stipple it first