Jump to content

SimplyEpik

Members
  • Content Count

    8
  • Joined

  • Last visited

About SimplyEpik

  • Rank
    Newbie

Additional Information

  • Airsofter since
    2008
  • Country
    United States
  1. If I remember correctly, someone posted a picture awhile back of an WE P226 where the slide broke into two pieces..
  2. I installed the PDI piston head on my pistol and I honestly didn't notice much of a difference.. If I was looking for the absolute best gas efficiency, then I would swap out the loading nozzle and install a Nine ball dyna piston head.
  3. That's good to hear! I must of got quite unlucky then.. The KP-05 can take most upgrade parts made for the Hi-capa 5.1. The parts that arent't compatible are: 1) The rear sight (They make theirs a different design rather then the standard Bomar style sights) 2) Dyna pistons heads or the ones with holes that expands the o-ring. (Believe me, I tried it. It may be because of how KJW's valve blocker is of different design. Only the normal TM type piston heads will work with it.) Those are the ones I can think of off the top of my head. I'll be sure to add more if there is any. Please feel
  4. I live on the east coast in the U.S so the temperature doesn't get very low at all. In the summer time, you can expect temp. to be around 80 to 100 degrees Fahrenheit (about 25 to 35 degrees Celsius I believe?) I also play indoors at my local arena and that can really get hot (No A/C and a bunch of sweaty men cramped into a small building..) Temperature may be the cause but I personally don't think it is.
  5. I bought this gun back in January so about 8 months now. I ran this gun hard and I would say I put well over 1000 rounds through it. I might be exaggerating a bit, but I know for sure I put quite a number of BBs through it.
  6. Same reaction I had! Haha. Well, I have used only green gas/propane with the pistol. I'm not sure if I personally had faulty parts or this can be expected on other guns. Though I have read other's experiences about the disconnector breaking and it is actually sort of common. Not so sure about the other parts but oh well.
  7. Thanks for taking the time to make this review! The WE XDM caught my interest awhile back and I have owned the KJW KP 08 for about 8 months now. Its taken alot of abuse from me. It's a solid pistol, but you'll be finding that parts will break on you. Issues I've ran into with this pistol is the disconnector breaking, along with the slide stop, magazine catch, and spring guide plug. Of course these can be easily replaced but its still an inconvenience. You'll also be running into problems with the outer barrel. The barrel is two piece and screw onto each other. Over time, the barrel will loose
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.