Jump to content


Forum Regular
  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by blobface

  1. blobface

    Glock Picture Thread

    I own a steel G23, G26, G17 and G34 with two slides (TTI style and Guarder G34 as per that picture), they all have Volante unit installed. I only have a video of the G34 with TTI steel slide at hand, but it should answer your question.
  2. blobface

    Glock Picture Thread

    Very much so, to a point where I use them at an IPSC airsoft club often and do fine alongside people using short stroked hi-capas, basically I don't feel like I'll ever be bottlenecked by the guns despite having steel slides.
  3. blobface

    Glock Picture Thread

    TM x Guarder, steel slide gen 3 Glock34 with Volante BBU, and a hacky but functional 3D printed mounting solution for the SRO, 1.6mm below the top surface of the slide similar to the MOS range. Slide milled by @PureSilver
  4. blobface

    WE G series MOS full house

    Like this..? This is the VFC x ALC steel slide version, but using Shield SMS instead of RMS or SMS2.0, but same mounting footprint. Had to copy ALC's RMR plate and get my own plate CNC'd as there's no aftermarket options 😕 FWIW though the SMS / RMS aren't actually co-witness so to speak, but more similar to 1/3 you'd find on rifle optics.
  5. blobface

    Other Pistols (2020 Onwards)

    As both the Springfield and Other Pistols thread have long been archived, I'm creating another "Other Pistols" thread! TM x RA-Tech XDM 40 RA-Tech steel slide, HK3P frame, Sringer Precision magwell and mag plate, with Springer Precision style 3D printed brake, 3D printed optic mount and charging handle. Once my trusty skirmish tactic00l black pistol, it has since been turned into an IPSC style open gun.
  6. blobface

    Glock Picture Thread

    It is indeed, very snappy with the Volante BBU as well given this is the lightest steel slide the unit is compatible with.
  7. blobface

    GHK x Umarex Glock 17

    - Forged full steel CNC Slide - Steel reinforced frame (overmould) - OOTB green gas ready - CO2 mag planned - "Lightweight" plastic mags (probably a sleeve) - 4.9lb pull, different trigger kit planned for the future - No BBU housing, the whole slide is effectively a BBU housing.
  8. blobface

    Glock Picture Thread

    TM x Guarder G26, stainless steel slide and Volante BBU.
  9. blobface

    Chiappa Firearms Rhino

    Out of interest why don't you wanna import one yourself?
  10. Ever since the Hollywood thread went to archive we don't seem to have a thread dedicated to movie, games or other popular culture inspired loadouts and collection, which accounts for the majority of the reasons I end up buying airsoft guns..! PUBG collection: KWA Kriss Vector WE x Ghost Island full steel M9 LCT VSS Vintorez Ino 1911 TM SCAR-L SA full steel Glock PPS Kar98 with PUBG style ACOG position (clearly game devs aren't familiar with the concept of eye relief) TM x LCS next-gen recoil M16 John Wick 1 + 2: TM x RA-Tech full steel HK45 (in lieu of P30L) with WT John Wick Comp TM x TH full steel G34 TTI Combat Master Continental chocolate coins...
  11. blobface

    Popular culture inspired collection and loadouts

    The ultimate Escape from Tarkov Obrez (PPS based)
  12. blobface

    Glock Picture Thread

    VFC Gen 5 17 with Pro-Arms MOS steel slide
  13. blobface

    Tokyo Marui Festival 2020 new products

    I look forward to you stuffing the internals into a Sakuma Drops box.
  14. blobface

    Anyone in Colorado?

    Can't tell if trolling of spam.
  15. blobface

    AK & Variants Picture Thread

    AC Unity 60 Rounder modded to take GHK internals, got it half price as it has cracked windows. Still work in progress, physically fits but don't dare test fire just yet until alignment is good. Once that's done, will look into expanding BB capacity and potentially even gas if it requires it. (Probably not necessary given default mag already goes through far more than one fill and I'm unlikely going to be able to double capacity. Helped by @Bada Bing's video for general mag mod tips, so thanks for that.
  16. blobface

    1911 Picture Thread

    It is, they had a Beretta in that movie with similar arrangement as well, and they are seen throughout in both configuration, I don't really know how you would seal it, I guess the suppressor has a neck that extends through the comp to thread onto the barrel. It's not a terrible idea actually, given that already exist for rifles with all those Surefire brakes with QD suppressor threads and what not.
  17. blobface

    FN Picture Thread

    Can't say honestly because it's just been sitting in a case and test fired less than 10 mags worth..!
  18. blobface

    FN Picture Thread

    Yeah I think so.
  19. blobface

    FN Picture Thread

    Finally made an RMR adapter for the TM x Guarder 5.7.
  20. blobface

    ALC Customs VFC Glock 17 Gen 5 MOS steel slide set

    Oh damn, good catch, I'll ask him what's going on lol (they are images of prototypes afterall, but you'd think this would be ironed out before it is surface treated) *He's responded: they knew about that already so don't worry
  21. According to a few people on an HK forum who have owned the TM Glocks with steel slide and Volante unit, and the VFC Gen 5 with steel kit, the general consensus is the VFC Gen 4 / 5 system is able to run a steel slide better even than the TM steel x Volante combo, as an owner of three of those, I'm both annoyed and excited. Some sample images of the ALC above, can't wait!
  22. blobface

    ALC Customs VFC Glock 17 Gen 5 MOS steel slide set

    Got another video today, whatsapp quality unfortunately.
  23. blobface

    GHK x ADAR 15

    ADAR 15 is a weird Russian AR featured in Escape from Tarkov, even though they go for $2000+ irl, they are used as a low end cheap gun that shoots 5.56 in the game... let's just say I was bored. My printer cannot handle the entire size, so had to split it into two, filament used is Fillamentum's Timberfill Cinnamon. I believe they're PLA mixed with sawdust. Sticking the parts together with Araldite and wood filler. Finished with a medium oak stain. Going for a distressed look to both go with what's in the game, but also to mask my lack of manual craftsmanship. The handguard's wood effect layers look pretty good. Stock pad printed in a flexible mateiral (Flexible PLA, not TPU), joints are kinda visible, they're worse irl especially on this side. Pic rail Cobra, paired with rs 20 round PMAG for looks, I hope to one day make it work with the GHK. PWS style muzzle device, made to take the guts of a AceTech Lighter S internal. Dummy P-MAG 60 from an AEG and a tan Elcan 1-4x. For those scavs who are feeling a bit rich. C H E E K I B R E E K I
  24. blobface

    Steel CAW HK69

    So a while ago I put all of my airsoft stuff (and most of my belongings) into storage, many months later after the home renovation was done, this happened to my CAW HK69. Naturally the next thing to do was the 3D print a replacement: Top: CAW version glued back together, bottom, sparkly blue test prints After the fitment was okay, it was time to get bits CNC'ed in steel Having ordered a few correct diameter steel tubes, they were sent to @junglejim LCs Engineering to fit, machine and assemble. As always, Jim did an amazing job on the lathe machining and putting the parts together, fitted with real steel iron sights, here's a little preview of it unfinished next to a two tone stainless steel USP-9. It was time to get the correct finish, after many places turned me down, finally a place was able to parkerise the parts for me, giving it a slight grey finish. Very happy with the results, weighing in at 2.5kg+, it's very close to the real thing. The final steps to take are likely going to be engraving the lower with trades, and also making a rs stock fit somehow.

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.