Jump to content

Baddbaz

Forum guru
  • Content Count

    1,687
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by Baddbaz

  1. I wish jg would put an m4 magazine capable aug into production . It is available as a real steel gun ! Short bodied m4 magazined aug would rock ..
  2. After having seen , fired and felt the trigger response on aod s gun I can honestly say that with some love and mods this gun is quite impressive , the trigger has a pretty good response on semi and auto . And the mag release works well on both sides .
  3. If the gun is new , take it back . If second hand . Could be that the steel carry handle has been bent by dropping etc . Have to bend it back somehow as it is an integral part of the handle . Also make sure you are putting the picatiny rail on the right way round . May be easier to bend it back to shape with the picatiny rail attached to the scope mount as at least you can get some twisting purchase into it .. Have not personally had to do this myself , am just thinking of what I would try to do in this situation . A metal workshop may have some better ideas or way of straightening it ou
  4. With the range these guns have on them they won't hear you anyway . There is not a lot of room to soundproof the 97 gearbox , most of the noise comes out if the foregrip vents so may be worth insulating there first . The 97 looks good with a silencer , but becomes a bit unwieldy to use , the b version less so The main difference is the set up on them both 97 is a high torque motor set up and the b variant has a high speed motor set up
  5. Trouble with all ares descended guns is the fact that they always have nice externals , the bad bits are always inside them , designed to just outlast their warrantys and then fail .. Hopefully this one is the exeption ..
  6. All you need to do is the handgrip internal mod . Cut away the thin shroud of plastic inside it and then it will take a 1300 7.4 lipo or an 1100 11.1 battery inside the grip . No taking the gun apart for battery changes or using 800 mah lipos anymore .. Also give the barrel a good clean as real swords always have an oil residue in them .
  7. Sounds a bit different but wouldn't describe it as grindier..is the gun new ?
  8. Very light gun . Dosnt weigh as much as my p90 and definatly no where as heavy as an l85/ type 97b . More the weight of an mp5k / mp7 . Sighting may be a problem if you are using a full face mesh mask as the ris rail is very flat to the top of the gun . It does have a groove down the middle of the ris rail which can sort of be used to aim with . The trigger pull is a two stage affair with a definite notch before you hit auto . No safety on this gun . Either semi or auto are your choices which may be a problem with some sites as auto is not able to be locked off by anything but you're trigger f
  9. That's the one . Just found it funny at the time , as every tech I have talked to who has took one apart has said its definatly ares / ares style internals . with a bit of tweaking and a new motor this gun is definatly skirmishable . But too many niggles to sort out for a gun at this price . The motor is rubbish and does get really hot in use . It dumps 7 to 10 bbs out everytime you do a mag change . And the most annoying thing is the lack of a click when a mag is inserted , I kept tugging at it to make sure it was located . The feed tube definatly needs polishing up as it has loads of r
  10. Search g&g guns in Hong Kong . It will bring up e hobby Asia about 5 down in the sites that come up . Select e Hobbys site and then click ares on the gun makes on the left of the page and it comes up at the top of the page .used yahoo for my search .
  11. And sell it to me when the insides break for project money !!!
  12. Just had to laugh , went on e hobbies Asia website and it has ares Hong Kong / pts magpul on a picture of a pdr ... What is going on here ?? Also has an abomination at the bottom of the page The magpul fpg is now being produced in pink !!!
  13. Installed the guarder clear complete hop set , bucking , nub etc
  14. Exactly my sentiments . Would rather have paid a bit more for it to have had better internals . And with it being a highly anticipated new gun design I think most people would agree with me on this . Especialy with other manufacturers bringing out quality internals on their guns nowadays I would expect more for a gun. At the 300 pound price point . Just look at internals from g&g ( top tech ) Lonex , dytac , guns . All in the 300 pound price bracket . As they say , Don't ever believe the hype , !!!
  15. 350 fps , can hit a man sized target , at 50 Mtrs can hit a 2x2 ft target with relative ease . Has taken a good few magazines for the guarder clear hop to bed in properly . Was about to give up with it and then it settled and the range is awesome . Was picking of off other players at rift Airsoft site with ease . And out ranging most of them by at least 10 Mtrs . . At 300fps the range is marginally less but the accuracy is still exceptional . Is matching my tm aug phantom kitted psg1 barrelled , overbored aug for range . Which takes some doing .. Put it up against a 400 fps vsr ( tm ) an
  16. Just picked up an 11.1 lipo battery 1100mah that fits perfectly into the handgrip . And by sheer fluke fits the pdw99 . Am now using a guarder clear hop set and a madbull 603 tightbore and with . 25 bbs the range has increased quite a bit . Am accurately hitting 60 Mtrs with this gun now .
  17. Hopefully with better internals than the Airsoft version
  18. Baddbaz

    WE XDM

    My advice for anyone using we pistols is to disassemble it and thread lock anything that screws together , as they have a tendancy to rattle themselves apart . Apart from that issue , a very good pistol with good range and accuracy . Haven't had any issues with my magazines yet . So pretty impressed with it at the moment . I have the compact version that comes with 2 mags out of the box . Only downside is a lack of holsters at retailers in the uk .
  19. I would rather stick a wasps nest up my butt hole than pay 320 quid ( uk price) for one of these . Body wise and external design I had high hopes for this gun . But after having seen the internals and the lack of improvement over the acr internals I will give this a wide berth unless it pops up in a bargain bin somewhere .. You would think that after the acr complaints and faults someone would have taken note and said let's improve and solve the problems before releasing this box again in another gun .. By the time you have added the work time and parts costs to make this a viable skirmi
  20. Baddbaz

    WE XDM

    Amersham Airsoft shop just outside london
  21. Don't get this stuff on your hop rubbers as it is a nightmare to remove from them !!! Also handy for lubing the pull cords on Lonex flash mags
  22. Have been using froglube for over a year now on all my aeg gearboxes and also on my gbb guns , This stuff seems to stay slippery forever and seems not to attract as much grit and grime as my older greases and silicone sprays did . . I also use it on silencer threads and any metal prone to rusting . Once you get used to your guns smelling like a dentists surgery there are no downsides to this stuff apart from the price if it ...
  23. Baddbaz

    WE XDM

    Brought the 3.8 compact to try it out as everyone kept saying how much we pistols have improved over the older models . Was very very sceptical , a genuine we hater.. Have to admit that mine has been good as gold , with no problems apart from the mag having to be located with a solid push or it Dosnt always work . now its bedded in with use it has lost this issue . This pistol has a realy solid blowback kick to it which brings a smile to my face every time I fire it and it is realy loud compared to my Kwa / tm pistols , the hop is a pain to set up , though once done this pistol has prett
  24. Baddbaz

    WE XDM

    When are the uk retailers gonna get their proverbial finger out of their butts and get some xdm kydex , SERPa or any holsters in stock for the xdm pistols !!!!!!
  25. Two ways to lipo the 97 one works for the b as well . If you cut out the small tab of plastic inside the handgrip a 7.4 1300 battery fits straight into the handgrip on the 97 and b variant . Or if you want 11.1 power get a nun chuck lipo and extend the link cables which then allows one battery to sit in the handgrip and the other in the foregrip . , this Dosnt work in the b variant though as its tighter in the foregrip area . Another option on the 97 is to fit a peq box in front of the carry handle by mounting a magpul short ris rail in the upper foregrip vents . And feeding the standard loom
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.