Jump to content

Berggy

Members
  • Content Count

    50
  • Joined

  • Last visited

About Berggy

  • Rank
    Adv Member

Additional Information

  • Country
    Afghanistan
  1. Berggy

    Initial Impressions of the TM SOPMOD M4 AEG

    There is definitely something wrong with 27x fps for .25 bbs?Stock gives ~94mps around 300fps Sent from my GT-I9300 using Tapatalk
  2. Berggy

    Initial Impressions of the TM SOPMOD M4 AEG

    Hi sunburnhammer. Did u toyed with the hopup as well? If not, try disassemble the gearbox and and check the tappet. Sent from my GT-I9300 using Tapatalk
  3. Berggy

    Initial Impressions of the TM SOPMOD M4 AEG

    My ideal setup will be an m120 with first pistons and mosfet. Someone please make a kosfet for TM EBB!! Sent from my GT-I9300 using Tapatalk
  4. Berggy

    PTW clones( DTW A&K etc)

    Finally got my Airo TW tonight. My first TW ever. Shoots and handle very much like a TW, and at this price it's no complaint. Though for lower powers I prefer my Marui ebb. Got a short fet with it. No wobbles. Hop up seems from stock, and I was told that it was improved over PTW hopups which give my friend all sort of trouble without tuning. Strangely it needs to feed on a 14.4v LiPo to give the right sort of trigger feel. Downside to me is that it's suppose to be a cab version but the inner barrel sticks out from the flash hider. Any idea how to test this baby out?
  5. Berggy

    Initial Impressions of the TM SOPMOD M4 AEG

    I feel the need to upgrade coz of the competitions i go to usually adds a bit more edge with more power. For games, the platform is pretty good as is. Just that generally i want to max out to the allowable limits for the best performance ican get Sent from my GT-I9300 using Tapatalk
  6. Berggy

    Tokyo Marui HK416D

    Mods are juat m120 spring with the contact plates replaced with tamiya connector soldered. My scar H suffer less lock up without know why the mods are just the same Sent from my GT-I9300 using Tapatalk
  7. Berggy

    Tokyo Marui HK416D

    I gets lockups quite frequent coz i do a lot of semis. Suspect maybe the 7.4 lipo not strong enough, hence amplifing the full trigger issue. Anyone making a switch that allows 11.1v to be used will be a godsend Sent from my GT-I9300 using Tapatalk
  8. Berggy

    Tokyo Marui HK416D

    Yes to replace the spring u need to take apart the gearbox first unfortunately. After the first time only stocktubes removal are needdd to change the springs. Sent from my GT-I9300 using Tapatalk
  9. Berggy

    Tokyo Marui HK416D

    Good for u. Mine locked up at a pretty important moment Sent from my GT-I9300 using Tapatalk
  10. Berggy

    Tokyo Marui HK416D

    I used 7.4v 25c lipo. Changed spring that gives around 360fps. Sent from my GT-I9300 using Tapatalk
  11. Berggy

    Tokyo Marui HK416D

    Me cant find a definite answer to the semi lock up issue but i suspect itz mainly due to the motor not powerful enough to push the gears to a full cycle using 9v batteries. 11v should clear it but it will kill the trigger as well. Sent from my GT-I9300 using Tapatalk
  12. Berggy

    Tokyo Marui HK416D

    The lonex hopup set wasnt too fit for thr m4 either for everyonez info Sent from my GT-I9300 using Tapatalk
  13. Berggy

    Tokyo Marui HK416D

    Zereck. I believed u have reassembled the bolt catch to the incorrect order. For the part where it makes contact sith the gearbox, make sure its sandwiched between thr gearbox shell and the tiny lever Sent from my GT-I9300 using Tapatalk
  14. Berggy

    Magpul PTS RM4 ERG Series.

    Looks good! anyone care to do an accuracy comparison with the TM recoil series?
  15. Berggy

    Initial Impressions of the TM SOPMOD M4 AEG

    Wanna know if a lower receiver can be ordered? broke mine when i dropped it hlash hider down
×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.