Jump to content

Berggy

Members
  • Content Count

    50
  • Joined

  • Last visited

Everything posted by Berggy

  1. There is definitely something wrong with 27x fps for .25 bbs?Stock gives ~94mps around 300fps Sent from my GT-I9300 using Tapatalk
  2. Hi sunburnhammer. Did u toyed with the hopup as well? If not, try disassemble the gearbox and and check the tappet. Sent from my GT-I9300 using Tapatalk
  3. My ideal setup will be an m120 with first pistons and mosfet. Someone please make a kosfet for TM EBB!! Sent from my GT-I9300 using Tapatalk
  4. Finally got my Airo TW tonight. My first TW ever. Shoots and handle very much like a TW, and at this price it's no complaint. Though for lower powers I prefer my Marui ebb. Got a short fet with it. No wobbles. Hop up seems from stock, and I was told that it was improved over PTW hopups which give my friend all sort of trouble without tuning. Strangely it needs to feed on a 14.4v LiPo to give the right sort of trigger feel. Downside to me is that it's suppose to be a cab version but the inner barrel sticks out from the flash hider. Any idea how to test this baby out?
  5. I feel the need to upgrade coz of the competitions i go to usually adds a bit more edge with more power. For games, the platform is pretty good as is. Just that generally i want to max out to the allowable limits for the best performance ican get Sent from my GT-I9300 using Tapatalk
  6. Mods are juat m120 spring with the contact plates replaced with tamiya connector soldered. My scar H suffer less lock up without know why the mods are just the same Sent from my GT-I9300 using Tapatalk
  7. I gets lockups quite frequent coz i do a lot of semis. Suspect maybe the 7.4 lipo not strong enough, hence amplifing the full trigger issue. Anyone making a switch that allows 11.1v to be used will be a godsend Sent from my GT-I9300 using Tapatalk
  8. Yes to replace the spring u need to take apart the gearbox first unfortunately. After the first time only stocktubes removal are needdd to change the springs. Sent from my GT-I9300 using Tapatalk
  9. Good for u. Mine locked up at a pretty important moment Sent from my GT-I9300 using Tapatalk
  10. I used 7.4v 25c lipo. Changed spring that gives around 360fps. Sent from my GT-I9300 using Tapatalk
  11. Me cant find a definite answer to the semi lock up issue but i suspect itz mainly due to the motor not powerful enough to push the gears to a full cycle using 9v batteries. 11v should clear it but it will kill the trigger as well. Sent from my GT-I9300 using Tapatalk
  12. The lonex hopup set wasnt too fit for thr m4 either for everyonez info Sent from my GT-I9300 using Tapatalk
  13. Zereck. I believed u have reassembled the bolt catch to the incorrect order. For the part where it makes contact sith the gearbox, make sure its sandwiched between thr gearbox shell and the tiny lever Sent from my GT-I9300 using Tapatalk
  14. Wanna know if a lower receiver can be ordered? broke mine when i dropped it hlash hider down
  15. mega may i ask if 7.4v batteries will handle a Lonex motor well? i have not tried theirs but have heard some strong motors will kill low voltage batteries easily. Not quite sure if it is true.
  16. For one truth learnt the heard way, no aftermarket beats Marui in grouping so far...
  17. I am afraid there is no one that will do that here...perhaps i need to get a welding machine from China and DIY
  18. Maybe I will do a testing and post up later about this.
  19. That is great info! Does the window guy told you how to do the welding? I broke my lower as well and perhaps I can weld it instead of getting a new lower
  20. Let me stir the shat here and ask : which AEG does not share the same design/idea? A 6mm BB being blown out by a piston driven by a spring. Which part of it doesnt look like the same for each AEG? I agree the PDR has shared similar solutions for problems encountered in say the Tavor, namely the trigger. But similar solution =\= OEM. I dont know if the gearbox of the PDR is good design or not. If it works, then its good. Time will tell. You can always build an AEG with Titanium and plasma cutting technology that costs millions, but it wont be a good design either. My $0.02
  21. I understand the benefit of higher contact surface that will bring more conductivity. What i really want to know is if under the normal airsoft loading range, does it really improve performances? i guess there are no literacy on that right now so my question pretty much answered.
  22. Definitely not Aluminum. Most likely some sort of alloy though by no means worse than some of the lower grade Aluminum.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.