Jump to content

freq88

Regular Poster
  • Content Count

    634
  • Joined

  • Last visited

Everything posted by freq88

  1. freq88

    WE Gas Blow Back M4A1 Carbine

    I think it's very unfair and totally baseless to call any and all "exploding" mags user negligence. As for a lawsuit not holding don't count your breath. If a lady can sue McDonald's for serving hot coffee that she accidently spilled and burnt herself and win. Then any incident involving any of your products can and will result in the same ruling. Especially, since it's mainly exported as a "toy".
  2. freq88

    WE Gas Blow Back M4A1 Carbine

    Your front sight is held on by a set screw underneath the sling mount in addition to the 2 pins.
  3. freq88

    WE Gas Blow Back M4A1 Carbine

    I'm sorry I'm relying on my pubic edumication and daylighting career for information here. And I will aimlessly attempt to back it up with a lot more uneducated reasoning. That I did not want to present needlessly in the first place. Figuring that a highly educated person as yourself would first consider and weigh an oppossing argument before dismissing it. Wrong, you're actual volume remains the same since it's the total volume of the mag. In order to use your law we have to be dealing with a completely vapor state, which we are not. In our case we're dealing with both the liquid and gas state of propane. The specific volume of gas changes as the ratio of liquid vs. vapor propane changes due to ambient temperature and discharge during use. However, the liquid does not affect the pressure since it has such a low boiling point at standard atmospheric pressure. Therefore, the pressure of propane is primarily determined by ambient temperature. Some more uneducated reasoning... At standard atmospheric pressure (0 PSIg) Propane boils at -44*F. Let's say we're able to fill our magazine at -44*F so it pure 100% propane. The volume of the mag hasn't changed has it? No it still holds the same amount of propane. Now we bring it up room temperature at 72*F. At which time the liquid propane boils off into a vapor it will begin to expand and compress within the mag until the pressure is capable of raising the boiling point above 72*F (Which will about 115 PSIg). The volume of propane hasn't changed has it? No, because it's still 100% propane. It is just that ratio of propane in liquid and vapor state has changed. Therefore, pressure is directly proportional to temperature. I say it's the material and design of the mag. The plate on top of the mag under the "face seal" I believe is the pressure release valve. But even under room temperature this plate can still leak, which makes it worthless since we're wasting gas for no reason. Casting is a poor method for creating any form container that will be subjected to pressure especially, when it's material pot metal and as thin as the walls are. Look at refrigeration pipes they're only 1/8" thick walls yet some systems have pressures in the 300-400PSIg range and are constantly subjected to direct sunlight and high ambient temperatures.
  4. freq88

    WE Gas Blow Back M4A1 Carbine

    I believe that only holds true if the temperature remains constant. In this case temperature does not remain constant it increases. So even though a pistol mag has a smaller volume it's still a constant, since it's a vessel and same with the GBBr mags. Therefore, as temperature increases so does the pressure.
  5. freq88

    WE Gas Blow Back M4A1 Carbine

    My mags weren't permanently sealed. They were 75-90% filled when they bursted due to the heat. And staying out of the sun during the summer is almost impossible in California for any duration especially during game time. The entire WE system is/has had a design flaw or QC issue from the beginning. Otherwise, the need to replace and or redesign certain parts wouldn't be necessary for the short duration that it's been available. Perhaps your magazines are flawed also. Otherwise, why would there be a need to "fix" mags right out of the box because they leak even during the winter months?
  6. freq88

    WE Gas Blow Back M4A1 Carbine

    I have yet to have a pistol mag or have heard of a pistol mag exploding due to summer heat. Then again if you look at the thickness of the walls of a pistol compared to say the WE there's a huge difference. It's a combination of the expansion rate of propane and the design of the mag itself but I'm leaning towards the mag as being the main culprit here. This isn't my first mag to pop either. I've had 2 pop on me. First one happened when I got mine for christmas. It was a bit cold out so I warmed up the mag filled with propane with hot water and the mag cracked at the side plate. Second time was in Feb. @ a game in the morning I was filling up in the morning and that one popped too. Oddly though it was the sheared off at the screws. Almost like the pressure of the gas simply tore the screw. Bent the plate. third time it literally blew up. Ambient temp was 60*F. In all 3 cases I noticed excessive gas leakage and then pop.
  7. freq88

    WE Gas Blow Back M4A1 Carbine

    FPS still erratic even with original brass nozzle. And 300FPS floating valve. Chrono'd @ approximately 90*F (30*C-35*C?) 350-390 on a 5 shot chrono on .20 with new hop, stabilizer and all. Testing this weekend I was having a hell of a time trying to tune it to stay within reason at 75*F-80*F. New hop works wonders and is day and night over the initial hop. But the erratic FPS is very frustrating. BTW WETTI you'll need to redesign your gas mag's too. They WILL not hold up to triple digit temps. One of my magazine's bursted today. Luckily it was in my go bag. I was running straight propane. Tore up the internal shell and popped the spot welds off the external shell. If you're running around in be very careful of your mags getting hit with full sunlight as temps on these will exceed 120*F-130*F easily. Picture to follow later. I need a shower
  8. freq88

    WE Gas Blow Back M4A1 Carbine

    rack, safe, insert, load
  9. freq88

    WE Gas Blow Back M4A1 Carbine

    I had the problem. I had to completely dispel the gas and allow the mag to warm up. I think the fill valve gets stuck when it's too cold. On a completely odd note one of my magazines popped. The pressure from the propane was too much I guess and it sheared the screws off the spline.
  10. freq88

    WE Gas Blow Back M4A1 Carbine

    The problem with Gas in Mag is that FPS will vary due to temperature. The WE is meant for propane or higher so using 134A/Duster will not work. The lower FPS stated is with the restricted nozzle. During winter, spring and late fall you should be within your field limits. I believe the stated FPS on the websites are taken @ room temp. Your best bet is to wait for the CO2 mags and CO2 bundle to be released. With the restricted nozzle and lower power regulated mags you should be able to play year round.
  11. freq88

    WE Gas Blow Back M4A1 Carbine

    Like I've said before a VSR style hopup bucking. Gets rid of the stupid little rubber cup and has a wider surface area for the hop. While the ball bearing to engage the hop isn't optimal it'll work. As a compromise a larger ball bearing to increase surface area. It's totally possible I've taken measurements and it wouldn't be much of change from the original chamber design to get it working.
  12. freq88

    WE Gas Blow Back M4A1 Carbine

    you might get a faster response if a new thread is made about airsoft buddy. Seeing several pages of irrate customers complaining is better than a few sporadic complaints here and there on 73 page thread.
  13. freq88

    G&P GBB M4A1 family

    no one positive review from a pimply faced kid on youtube does it for me.
  14. freq88

    G&P GBB M4A1 family

    You're reading too much into the talking horse metaphor. Go outside and play with a farm animal for while. And stats can be very subjective as it's easily manipulated as milking a cow.
  15. freq88

    G&P GBB M4A1 family

    Farm animals are much easier to understand than cars. And you've proven our point as well. That again it doesn't matter what specs it has on paper or what not. It's what you can get out of it. So to make the assumption that it isn't as good on paper makes less skirmishable is about as much hogwash as a horse that can talk.
  16. freq88

    G&P GBB M4A1 family

    I think too many people are making airsoft more competitive then it needs to be. This isn't paintball, there are no prize money or trophies to be had. Just good times and good stories to tell afterwards. In all my years of playing the more "competitive" people feel they need to be is proportionate to the number cheating incidents. In other words games where people are just out to have fun are less likely to cheat than those who are out to dominate and win. Cost of ownership does not mean unskirmishable. It just means fewer people are able to afford it. Again I've played with, played personally with plenty of GBBr, Classics and GBB against AEG's with highcaps, midcaps and what not and had lots more fun, not to mention been able to hold my own. Hit's maybe fewer, but they sure are a lot more rewarding since you have to work harder and smarter to get them. Practicality of GBBr vs. AEG again is irrelevant since it is up to the operator to decide how to maximize what they are using/have. Just like the real stuff these are nothing more than tools. It is our ability to implement them to the maximum of it's own potential and of our abilities that's important.
  17. freq88

    G&P GBB M4A1 family

    In other words operator error.
  18. freq88

    G&P GBB M4A1 family

    I beg to differ on gbb not being skirmishable. There plenty of people that play with pistols only. And there are those who skirmish against AEG's with the WE and WA M4 GBB. Along with the external rigged Escorts and other classics too. Limited rounds isn't always a handicap it just makes things more challenging. The only advantage AEG's have over GBB is cost of ownership over the lifespan of the user.
  19. freq88

    WE Gas Blow Back M4A1 Carbine

    If we were talking about aeg's.
  20. freq88

    WE Gas Blow Back M4A1 Carbine

    if 2 are chambered wouldn't you get a double fire? I can see the logic in 30+1,1 in chamber and 30 in mag, but have ahard time following 2 prechambered
  21. freq88

    WE Gas Blow Back M4A1 Carbine

    Sorry I should've made myself clearer This was directed at the vendor of www.airsoftammosupply.com aka rfisherjr. On his website under both the magazine and the Rifle it states that the WE has 30+2 ammo capacity. Also 30+2 = 32 and not 33.
  22. freq88

    WE Gas Blow Back M4A1 Carbine

    curious as to how you got 30+2 for the ammo capacity
  23. freq88

    WE Gas Blow Back M4A1 Carbine

    if you're not too familiar with GBB's I suggest you use it as is until you become more familiar with the workings of GBB's. BTW RIS/Rails is hardly an "upgrade" more like an "accessory" as it does nothing to improve the performance of the rifle or your abilities to operate it.
  24. freq88

    Initial Impressions of the TM SOPMOD M4 AEG

    Where do you plan on putting the MOSFET? Since the buffer tube space is being utilized?
  25. freq88

    WE Gas Blow Back M4A1 Carbine

    chinese new years is coming up there's alot customary rituals so he could also be preoccupied
×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.