HOPPERSAN

I was told it would be to heavy and did not want to risk it. Its nice to know its been working good for you though. I will really look into that . thanks

Hi Lewis... so I got back to my gun today and took the bolt down there are a couple thing I have noticed . First is that the nozzle shell I had just installed broke at the back top of the nozzle where my original had broken bummer because I just got it and only had a couple bad dry fire shots out of it . I also noticed that the 1 of the 2 small o rings on the npas was broken , the one that has its own milled grove for it to sit in , not the one on the adjustable threads. So I pull out the second spare nozzle shell I ordered and try for round two . The next problem I ran into was t

Thanks luis .. I only have a black o-ring - and had to sand it down a little so it would not sick in the bolt I do not think I went to far I am home now and left the gun at work so I will give it a try latter . Thanks again for your help 1 more dumb question if it is to tight can i just stretch it.

HI question ..my agm has been an on the shelf project just pull it down when i have some free time . I have installed the aabb nozzle w npas and have everything in properly i think but the rifle will not cycle properly .. I have taken the outer barrel assy off so I could narrow down the issue. My agm will fire fine if held upside down the bolt cycles fine but if held properly all I get is a small puff of gas then i cycle the charging handle and again small puff of gas . turn the gun upside down and I can get a regular shot off ..I have no play in the magazine at all so I am lost any help woul

I will give it a try thanks

I just installed my new element nozzle and npas package and it is very tight inside the bcg . I changed the oring that came with the unit back to the original from my broken agm nozzle. My question is if i manually pull the nozzle forward and let it go should it snap back into place? it will go all the way in with just a little force but the spring on the nozzle does not seem to have enough power to pull it back I lightly sanded the rails on the nozzle but don't want to go to far .. i have not fired it yet ...any advise would be great

agreed same thing happened to me on 2 different orders for a nozzle.Ebb said they were in stock I ordered the day they were released and never got an update .. emailed them finally and the said all items were out of stock and they may be back in stock in about a month .. totally agree I should have spent the money on .223 but with my luck I would of not been able to find any..waiting and hopefully another retailer will have some so i can get my agm up and running and still have money for some 223

http://www.ebairsoft.com/plastic-nozzle-sh...135-p-2939.html ANY INFO ???

http://www.ebairsoft.com/aabb-aluminum-loa...re-pr-2635.html looks like you can buy it now

THANKS LUIS so over all if you had to do it all over again what set up would you use ?

Thanks for the info guys .hope it all works out for both of you

Question about the new jdt bolt and nozzle that came out on ebairsoft . They have listed :Play attention the bolt can only match Inokatsu type Nozzle How does that apply to the agm users ? do inokatsu use different hop up or anything? Are they saying that if the metal nozzle were to break only the Inokatsu nozzle will work for a replacement or that you can only use that specific bolt carrier or bolt carriers made for inokatsu e.g. no airsoft surgeon vltor stuff? Anyone know ..Thanks .....Luis21 eagerly awaiting your review thanks

hey luis can we get a link to that hop-up when you get a moment , that is for aeg barrels correct?

thanks luis that is what I was looking at please let us know how yours works out .

Anyone up to comprising a list of confirmed working and drop in compatible parts or can you link one ? thanks. The rear of the nozzle cracked after 400 rounds and I am looking at b.c.g upgrade or just replacing the stock nozzle with the 12 dollar replacement . My rifle is stock otherwise. I am not looking for any thing pretty just want the gun to fire and last a full skirmish dont care to much about fps just durability