Glaive

DOn;t drop it in the woods or some grass, you won't find it again.

Brand New. Fun car. Both.

It came that way, actually. I tried taking the bolt apart, but all that did for me was strip one of the screws holding the whole assembly together, and the PCS knob was STILL stuck.

You've gotta take the bolt out, and then unscrew a 1.5mm grub screw in the bolt, so the little dial can move. unfortunately, mine is stuck all the way open. So I'm either hurting people, or HURTING people, depending on what gas I use.

ISS GOJIRRRRRA!

Lose the cantilever mount. Otherwise, very, very hawt.

I just got back from shooting her, finally, so I thought I'd do a full write up on it. First Impressions: I had to wait a day later than I was hoping because no one was home to sign for the four foot box on wednesday. HOwever, when I got home Thursday, I grabbed it out of the poor man's hands, and ran with it, hastily grabbing a knife to cut off that damned green paper on the box. When I did, however, I was ASTOUNDED. There she lay, in all her beauty. Well, in a plastic bag. The guys at redwolf were nice enough to stick lots of padding bits in the box, which was sparse of protection

Well, considering that the striker pin wouldn't be aligned with the primer cap, it wouldn't fire in the first place. That's why guns actually jam; because the action didn't work. Second, you can't load two pieces of brass at the same time. So no, actually.

Gotta say I like the SPR in that one pic, but loses points for an unstable firing position.

Fareast, that LR300ML is completely, utterly, inarguably pimp.

Plus Loctite will loosen right up with a blowdryer.

Hmmm. M249 and "silent assassin" don't really go together to well in my head. Ah well, that thing is TOTALLY ridiculous.

Lucky SOB. It's either a MARSOC or a TLE/RL II for me, and no one has either in stock.

Seconded. WTF?

And then of course there's the Phase one, which has a square-ish suppressor.

Man, you need to buy less guns and accessorize more! The CQB needs a Red-dot and more magazines.

Yeah, but the problem for me is I want AT LEAST 9.6v. If anyone knows how, please, do tell.

It's the G&G G36k RAS, with a KM tightbore (363mm) and a G&P Aimpoint. THe vert grip is a G&G railed ABS grip. Internally, she's still stock, and I still haven't found a non-peq place for the battery.

More G36 goodness.

Pretty much done externally, I may add an XM203 though.

Yeah. My KA M3 broke somehow, and I think it's the bulb. Anyone know where I can get a replacement?

"KItchen's clear!" "What do you mean? We can't POSSIBLY let that cake sit there!"

Seeing as the Gspec suppressor works for ###### with a 150, I'll be going to a bullbarrel, so I should need to worry about it.

Thanks Tripod and Airsoftfreak. She just needs a teflon cylinder, tightbore, and other various odds and ends.

Ummm. Where do you live? And don't mind the lasers on you or your surroundings. They're perfectly normal.