farrasdevell

Leo kohler gear also runs just on the baggy side for my tastes which is a shame because it is damn fine gear

If it works and solves a problem it isn't lame.

I am replacing with APS orings. Now I have some of these out of shells I'll send them to the guys I buy orings from and see if they can match them in bulk. I'm dallying with drilling out the caps until I have a new vice for my pillar drill. Entertained myself today by Devil modding all my co2 GHK mags also.

swapping out half a dozen of these orings that have been sloppily cut.

Finally released from customs. Still there with the scres for the mag tube. Interestingly has the gold sia follower

https://youtu.be/2tQ-8Jg6RjE Not in english but points to a few interesting things. Mine is with UK customs as I type, just waiting for my ransom note. Pics when it gets here

Does the wider opening affect the priming position as per your guide with presetting the valve with a bb? Does the wider channel allow the vale to move further forward than one un-widened?

What outer barrel are you using? or are you running without a gas block.

(click to supersize) Just for reference, The upper nozzle is a 1j The lower nozzle with the obviously smaller valve is the stock. There is a sight difference in the stiffness of the valve springs which means the 1j shuts off much faster.

double post pls delete

I'll try and take some comparison pics of the 1j and stock nozzles tomorrow. so I'm adding something to the thread, here is the oring sizes that Nugentgl put up on gasguns. GHK Magazines: Green Gas Valve = 1mm x 8mm; 1.1mm x 5.6mm; 1.5mm x 4.5mm (grey oring); 1.78mm x 2.57mm C02 Valve = 1mm x 8mm; 1.1mm x 5.6mm Magazine Tube Cap = 1.78mm x 14mm GHK M4: Nozzle = 3mm x 12mm (black oring)

Better? they click through bigger no real changes other than a sling plate, surefire brake (avalon I think) and an emerson gunfighter grip.

Hi, I keep seeing random images in the retailers banner side bar? mostly fb images from random friends FB uploads. see images

As my local site is CQB and I almost entirely field a bolt action I decided to sink for a good GBB M4. As I had a small excess of free cash for the first time in a long time I felt that I could justify the GHK. I went for the 10.5 purely for convenience but I have since bought a 16.5 rail and barrel with plans to build a second upper receiver for woodland/non basr friendly milsims. Rather than bog about with green gas mags I bought 3 co2 mags with the rifle and will pick up another three in a couple of months. 1j nozzle fitted it averages 312 with .25g although if the rifle has sat unuse

Sorry for slight laziness, Is this the better thread to lurk about in for GHKm4 talk? as there seems to not be a direct ghk thread,

Some from today