Jump to content

Frexion

Members
  • Content Count

    12
  • Joined

  • Last visited

About Frexion

  • Rank
    Member

Additional Information

  • Airsofter since
    2006
  • Country
    Indonesia
  1. I've just converted my CB SCAR into open bolt one. And i realized 1 problem with my new v2 mag, it's misfeed after 4-5 shots. But i also find the solution: get 1-2 mm card insert between gas router set (magazine lips) and the magazine itself. It worked for me. Apparently, the magazine lips doesnt tall enough to feed the nozzle.
  2. UPDATE: after all the jamming issues,my hk45 feed ramp is broken. it seems to much stress on the left side of the part. MY umarex kwa HK 45 with detonator slide before it got broken..
  3. Then you must be lucky. Unfortunately mine was lemon. Apart from the jamming issues, it shoots well and more straight than my KJW KP01 and my KSC USP. Updated: this problem that happens to me
  4. After over 2000 shots, my azimuth polycarb nozzle bent over. It occurs because when i load the magazine, i dont rack the cocking handle back.Leaving the follower pushes the loading nozzle up. it still shoots normally, but it doesnt stop shooting when the bb is depleted. So, i change my nozzle with this http://www.wgcshop.com/wgc2008/main/product_detail1.php?search_From=searchItem&item=VFC-UGP-MP5GBB&search=special&rs=vfc%20mp5%20gbb&catid=&cat=&view_choice=c ROF is more stable, and there's no sign of wear after shooting auto about 200 shots. But this no
  5. Hmm.. that's odd. this jamming problem occurs every 2 last shot or sometimes it doesnt cycle the bb properly, leaving it locks slide but still 1 bb in the mag. Okay, so your point is this is faulty of the production design of umarex hk45, right? and I guess there's nothing i can do about this problem.
  6. Hi, is anyone still having problem with double feed in 2 last shot on KSC/KWA Hk45? mine still have it although i've sanded the feeding ramp, switched the BBU(breech and loading nozzle) with my USP, even using my USP magazine. Is there any more solution that i could do? Thanks in advance..
  7. My right navy selector keep loosen off about 2-3 mm Anyone have experienced with this? if yes, how to fix it? thanks before..
  8. Yes, and the person who shared that video is here in this topic too.. Vfc mp5 only need bolt guide, reinforced loading nozzle, and new feed ramp from crusader and you're good to go upgrade if necessary: new hi-performance valve, new copper cylinder, and hopup rubber. My mp5 never failed in skirmish although it is more likely to go on burst than single shot.. And 1 more thing, dont forget to rack up the charging handle before inserting new magazine.
  9. hey AP, with the new feeding ramp installed, can you insert new magazine smoothly with bolt carrier forward?
  10. Hey guys, any improvement made by installing this product "Angry Gun 120% Recoil Spring Guide" ? for instance, any harder blowback maybe? or it's just make the bolt carrier more prone to break?
  11. Hey, I knew that regular/ACM airsoft low profile mounting doesnt fit. But has anyone used ACM or other airsoft claw high rail mounting fit on vfc mp5?
  12. So, anyone did know how many meters/feet the effective range of this mp5 can shoot with the stock hop up?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.