wolfsbane

WE GBB m4 RS RIS RS ergo grip

installed the adjustable valve and it was good at first but after the 12th mag on game day the valve started to adjust itself and closed up causing malfunction. Looked into it and it is simply the grub screw holding the adjustable bit coming loose with all the vibration and pressure. thank go the grub screw did not get lost but it was close. When I checked it was almost all the way out. Got a fixed 300FPS valve bit from Tactical quarter master and that seems to work ok so far. On green with .20 it is not doing 300 though but doing 340 + but on .25 it is about 300 and flight is

just installed the 90% buffer spring from airsoftbuddy (its a TSC i think?) Works great! I installed the adjustable rod to bring the FPS down and noticed a significant drop in recoil but now with the new spring installed the blowback strength is back to normal. Only thing is there is a spring twangy sound at the end of each shot as the new spring is shorter than the original. The new spring is softer and shorter. I will probably get use to the twangy sound after a while and is a small price to pay for a better recoil. Am also going to attempt to make an ambi selector... any

any one heard of any third party parts for the WE like ambi selectors, etc?

Will try the sanding... have you chronoed? Is the FPS consistent? I have found with the TCS plates that they do work it is just that they need to wear in a bit. It seems like the finish is too smooth and the bolt slips but if you sand them a bit or just let them wear in slowly, they do work and they work pretty well.

just got the TSC Uni-Directional Guide Rod with Locking Power Adjustment Knob from Airsoft 123. Fantastic service from 123. Unfortunately after installing, my m4 started to misfire... bolt would not blowback enough and often did a burst and vented the mag. To make sure that it was the new guide rod and not the m4 that was messing up, I dismantled the rod and took only the adjustable nut and added that to my old original WE guide rod. It now fires as per normal so something was up with the TSC rod. I now have a standard WE rod and nozzle with an adjustable locking nut. (wish

yep I saw those. they were norgon ones .... and they very cheap at horizon as SRP is over $100. anyone tried an AEG mag catch in a WE m4? how about the magic pins.... anyone tried the a RS version of these pins? do RS ar pins even work in WE m4s?

Does anyone have any news on an ambi magazine catch that will work on the WE m4. also... anyone using the RA tech magic pin or the G&P WA locking pin on a WE. Do these really work?

Chris , I modified the way it was shown on this thread .. dunno which page it is but some pages back there is full instructions to do just this.

if it curves down very quickly rather than simply drop then it is definitely a hop issue. if it merely drops than it a pressure issue.

recently modified my nozzle to make it shoot 320+fps. It does that now and is perfect but I have realised that the blowback intensity is very slightly affected (weaker) and will probably be more significant when the whether gets colder over here. anyone experience this and is there a solution? will cutting the buffer spring do anything? also... What is the easiest way of taking out the fire selector? I want to make an ambi switch by drilling and screwing in a spare AEG fire switch to the other side. Anyone done this and how feasible to you think this is?

anyone knows who sells these in the UK? I am really interested but would really need the aftersales to make me take the plunge.

anyone use this on a GBB m4? How does it handle recoil? .. or could someone who has this give it a good violent shake and smack it around alittle to see if the dot falters. cheers

RS UTG/Leapers Alu quad rail - fits like a glove, very affordable for RS and once fitted is rock solid! Prime quad rail gas block -- uses grub screws to install instead of pins. Fits but there is a slight shake RS UTG/leapers rubber AR grip - fits perfect and very comfy newest version WE charging handle - ordered from AB... definitely stronger than the 1st version and so far so good. G&P ambi charging handle latch for WA - needs a bit of modification but will fit and function G&G Visible carbine laser unit - dodgy. witht eh recoil, it can shake itself off

inner barrel: mine does the same. I think there is a somethiing above fixing this a few pages back with a pic of the possible spacer you can use.. sorry I can't for the life of me remember where though. All I did was pad my inner barrel out with electric tape and now it sits ... center - rish... and does not move when shooting.

never had a TMP but had a m11.. does the bolt lock on empty?

Just to let everyone know .. Bought a G&P ambi charging handle latch for WA to fit it onto my WE. http://www.gp-web.com/en/productspop.php?pid=1847 built quality: Really good! good steel and feels very sturdy, very interesting design. fit: well.... does not fit WE... the hole from for the pin on the charging handle is different size and misaligned. Hole on the latch needs a bit of filing down.. only a bit. After that it fits no problem and works fantastic! I would recommend this if you are a lefty and can't get hold of a RS ambi latch.

Anyone know where I can find images of the latest versions manual?.. all that I seem to be able to find all show the old hop up and the bolt carrier group show no stabilizers.

DIAMOND GEEZERS! all the input for part 59 is fantastic!!

looks like building a complete bolt that will shoot 300-325fps is the way to go then. Does any retailer sell that at the moment?

TSC Bolt Catch Plates for WE Gas Blow Back M4 straight out of the packet you can tell its alot tougher and the base where it catches the bolt the plate is alot thicker than the standard. very easy to install as well. Unscrew the screw at the bottom of the mag and push upwards. No need to remove the entire mag shell. simply push enough out to expose the old bolt catch plate and pop it out and replace with new one. when 1st installed I noticed that performance actually got worst.. bolt did not lock back and would only do it after 5-6 shots.. but it seems that its got something

I keep hearing that and it does make perfect sense but thenI have never ever heard it from an actual person who used one. it seems to be a bit of a airsoft urban myth... I heard it from a friend of a friend kinda thing. Why I ask is because (and it is obvious) ...then wouldn't velocity reducers be perfect for guys like me who love the m4 but need it to shoot less when skirmishing and wouldn't mind the extra punch when doing tactical carbine (practical rifle, target , etc..) drop in complete bolt sets would be perfect but until then.. maybe velo reducer?

Thanks for the update WE. as a lefty I can't wait for the release of the ambi switch.

I know velocity reducers are not great and there is controvesy of whether they actually work on full auto or not. how do you think one will work on the WEM4 platform. I will be playing on semi most of time anyway... anybody with actual experience with velocity reducers?

wasn't asking about charging handle. its RS bolt catch or bolt release (ping pong panel). Will a RS version fit?