LJ.NL

Want! $2000+, pass

Allright, installed the steel trigger parts: works like a charm! Way better trigger pull and no more burst issues on semi. Looking back I think my trigger was buggy from day one, as this is much much better. Newly created problem while testing: the nozzle broke.. One side/wing of part #109 gave out, making pin #117 slide out a bit, tearing out the pin-holes on #109 and #110. Have to replace the nozzle or maybe try a fix with new drilled holes and glue it together.

Yes, I figured it's best to go for a steel set also, and go from there. As it seems the 'sweet spot' for semi or full-auto/burst is getting smaller every round fired Thanks again for the help, I'll update once I have things sorted! (I'm building a backpack-bb-feeder thingy into the magazine to avoid having to build high-caps or dragging around multiple expensive/heavy mags. If it works I'll share it here.)

Thank you for clearing that up! I've tried adding material to the selector and triggerbar places, but I still get 2 or 3 shot burst on semi (sometimes 1 shot, but mostly short bursts). I've checked the trigger parts and part #25 is bent a little bit (but not as much as other users have shown in this topic), could that be the issue? Also; I'm running it on hpa, and it cycles pretty fast, maybe to fast to engage the sears after just on shot? Thanks again!

Playing around with my P90 to see if I can get it to run nicely for CQB, I'm wondering if it's possible to disable full-auto? Looking at the sears I'm thinking of grinding some material off part number 17: the spot thats in contact with part number 24 (that's also beeing smoothed for a lighter trigger pull). If I remove just enough material, so that nr 17 doesn't get pushed far enough for full-auto, I can put the fire selector on full-auto and it'll just fire one shot, right? Or am I looking at things wrong? Thanks!

Oh right, SIG picture thread, so this can go here : GHK SIG 553 GBB:

Bump

Upgraded for realism, but it still has the mold line near the 'thumb dent' .. ;D

Got mine! Thank you!

Hi, Looking for a single KWA Kris Vector short (22rnd) magazine. Anyone got one leftover/spare? Thanks!

It’s not hard to find, no. What I’m saying it’s not that big of a gap, and barely noticable (for the normal people among us). Just get one in hand, and you’ll see. (Or don’t, and focus on the manufacturers you do like ;p) About the magazine, he states it’s not a problem with new magazines but it develops over time, so I’ll have to wait and see of those marks start to appear in the future. (But I doubt it, as there are currently no marks at that spot. Even after many, many, mag inserts the past week.) On to some more interesting things of the 553: I noticed the replica needed serious maintenance right out the box. I had to clean and ‘super lube’ the whole thing. There was a fine dust (machining leftovers?) everywhere on the internals. Even the innerbarrel was dirty. That was a bit of a shocker. But as one should, I always take the whole thing apart to get to know the working and re-lube etc.. Once cleaned and freshly lubed, it runs smooth as silk. I’ve shot it the last two days (after HPA-tapping the mag and binding a g&g aeg SIG hicap to it). And it shoots pretty accurate on the 40-50 meter range (0.28gr). Keeping in mind the whole thing needs to run in a bit (the hopup rubber), I’m not looking to upgrade the barrel or anything yet. I’ll probably run this for CQB only, but it looks like it can reach out pretty far. I’ll have another run with more bb weights and longer range next weekend.

I got one. The magazine fits in more snug then other rifles, for sure, but it feeds perfect. It’s either this, or a ‘mag wobble’. There is no large gap between the upper and lower. If you look at it directly from the side you can see a small space, but that looks normal. If someone is getting his panties twisted because of that little space, I’m glad I’m not that person ;D I recommend people to take it with a truckload of salt.

And there she is (went trough customs pretty fast!): Looks & feels superb, solid as a rock! I'll have some test runs with it this weekend. The search for a nice optic begins..

Oh everybody knows? So sorry, I figured I'd save somebody the time, money and effort before going with a gas AK/rifle drum mag. As it will work like a wet towel on a rifle.. Sure the seller/developer could show video's of great efficiency, but we all know that it won't work in game like that, unfortunately. (disclaimer: not to throw dirt, for a pistol it might get along nicely, I just hooked in on the AK drum part ;))

Ordered, thank you!