Alias1983

They do not. Some used to but I'm not sure where you can get them. For the fps range I'd go 70*, I had one in my old m4 and with .28g I could headshot at 200' with just under 350 fps. Best effective range was about 250' and after that was a shoot. I did not get much l/r deviations and I ran a m4a1 rat tbb.

The buffer tube is just a receiver extension. If you remove about half the length of the bolt it won't enter the receiver extension. Lwrc, Adams arms, the kac pdw. All piston designs. But I'm sure a direct impingement design could do the same. It's all in the buffer spring design and how to mount it.

That's a lot of G's

More with salty air areas. If you can see your car rusting you should lube more.

As long as nothing gets in the action it should be good to go just like the real thing. I run my gas guns very dry to almost nothing.

Phrasing.

Mine was glued in on the elite force

I have yet to experience these failures you speak of and I shoot ghk a lot as its my only usable rifle.

It is vsr

If I was to get an aeg again(parish the thought), I'd get a no frills nothing. IMO its just more to go wrong and makes options limited.

@got wood? That sight should go on a "wasteland" gun.

I'll be sure not to buy there if I have to.

Perma seal it.

Where did you buy it?

Not for that price. I'll ghop the ghk before I spend that much.

My ghk has never had a leakey mag(lube them!) My ghk has a solid bolt lock, never failed. My hop is not inconsistent Kick is a stupid way to say one format is better. Same with fps. The beat clone of WA is g&p, but vt/ino is all steel yadda yadda. my we was 90% stock and would go bang every time. I had a tbb/bucking because I went longer OB. The npas is a *suitcase* design, I had 3 strip out from marginal adjustments. Vfc has a ###### mag design, that is 90% of its issues. The marui afaic like the m870 to many parts to do something. My we I only had to rep

My tac leaked, never fed a bb, was more wobbly than a wet noodle.

The ones I linked to will work just fine, you just have to sort the co2 bottle part. Nugentgl had issues with the 70$ madbull one and I think he used just the part without the regulator

I see no need for a tm.

You have options, choose a rail that the lower portion can come off. Some dd rails(I'm not sure which ones) Kac urx 3.1 There are others but the names slip my mind, but if they work with barrel mounted 203s. You can cut a hole in your rail which many have done. Many also just poke at it with a screwdriver through the holes. Devilhunter compatible valves like the kjw like this. http://www.evike.com/products/36737/ For the output valve go to samoon and get the valves from the.

Just what is better about the marui? From my experience with tms metals are about the same quality. I'd sure love a metallurgical examination of the metals other than "it just is".

It won't fit as far as I can tell

Mostly cause I want the thumb rest

I think I want to just get the hl3 frame and some guarder externals like mag bases. I'd love to get the ready fighter extended bases for mag efficiency more than bb count. I load 17 anyway for real cap training

File the bad lever, from the sound you have to do alot