Jump to content

Wooly_Booly

Regular Poster
  • Content Count

    206
  • Joined

  • Last visited

  • Days Won

    4

Posts posted by Wooly_Booly

  1. Anyone have suggestions for removing the pin which holds the hammer mechanism in place? I've been hitting both sides with a hammer and punch and haven't done much but slightly wear at the pin. I've got everything else removed but that pin

    Edit: And within a minute of me posting I managed to remove it

    • Haha 1
  2. Still doing some tweaks and fine tuning, but here is my mostly finished WE base Prime/Iron Airsoft Remington R5.

    cc4COKr.jpg

    qQyDeqs.jpg

    0AlUOQN.jpg

    CC3QHiP.jpg

    T3sl4A1.jpg

    Upper is an Iron Airsoft WA based R5 set modified to fit the WE internals, the entire hopup collar assembly needed to be redesigned and 3D printed, getting them machined now.

    Lower is #10 out of the 100 MPL lowers Prime made for the WE system, only took a small bit of milking to fit the upper properly.

     

    Full parts list here:

    Upper:
    * Iron Airsoft R5 upper receiver (Cerekoted in Patriot Brown (needs to be redone sometime soon))
    *Seekins Precision DNA charging handle
    *Angry Gun gen 2 steel bolt carrier
    *(Not currently installed) Poseidon ZERO 1 WE nozzle
    *Angry Gun WE M4 hop-up
    *Falcon Double point VS-Z 80 degree hop-up bucking
    *Falcon 6.03 330mm CNC Copper alloy inner barrel
    *Custom outer barrel/hop-up collar pieces.
    *WE MSK flash hider
    *Daniel Defense fixed front and rear sights

    *DLC titanium forward assist

    *V7 dust cover (not currently attached

    *3D made angled grip, there surprisingly aren’t many Cadex attachment pieces on the market. Might redesign to make it more ergonomic.

    Lower:
    *Prime WE Magpul Lower (Cerekoted in Patriot Brown (needs to be redone sometime soon))
    *Stock WE trigger assembly (Wii Tech may be making WE parts, I’ll probably move to them if they do)
    *Angry Gun anti rotation pins
    *V7 ambi short 57-90 degree selector (currently at the 90 degree position)(Locked to semi only)
    *V7 magazine catch
    *V7 body pins
    *Daniel Defense buffer tube
    *Unknown brand H buffer
    *Unknown brand buffer spring, looking for a Viper Tech Spring
    *V7 castle nut

    *V7 QD endplate
    *BCM MOD 2 pistol grip(not currently attached)
    *BCM MOD 0 stock
    *ERGO Suregrip
    *MFT minimalist stock(not currently attached)
    *Airsoft Platz Stiffy Knob

    The magazine is the Sankoshop Remington engraved MSK magazine. I’m 6 new MSK mags custom done, just got photos from my guy.

    kCB9jBW.jpgcrS6REg.jpg

     

    • Like 6
  3. I wish some of these models are made available in TM flavour, when I was younger those are hard to justify, oh, wait, not even now :P

     

    Especially NH T3, but I wouldn't mind newer NH models like Agent 1 lol

    Ken's Props makes a 3d printed T3, though that may not be what you're looking for.

  4. My pride and joy,

    Prime/WA SCW 3 SIG GSR.

    The trigger, magazine release, slide catch, thumb safety, grip safety, mainspring housing, and hammer are all Prime/Anvil made.
    The outer barrel, chamber, recoil assembly/recoil plug, and barrel bushing are all made by Gunsmith Ninja (Some translations show it as Ninjya, probably just Ninja.)Blowback unit is CP made machined aluminum. I don't recall if it's 7075 or 6061.
    Grips are genuine Ergo grips.
    Not sure on/can't recall the brand of body pins, grip screws, inner barrel/hop-up assembly.

    Fitment is a little too good, I can't seem to remove the recoil plug from the slide without maybe using a rubber mallet, but I didn't want to take the risk.




    sr3CWP6.jpgNr3jNN9.jpg5zhbUIe.jpghITcLJb.jpgJYn5MXg.jpg

    • Like 7
  5. Reupload of the T3.

    WA Nighthawk T3 with some unknown brand of slide. 100% positive it isn't Prime, Edge, Sheriff, Zeke, or the other few companies which typically make WA slides. Recoil spring guide and other parts are unique to the slide, they aren't compatible with my other stock T3 slide.

    340oNXH.jpgMhMVgkm.jpg

    • Like 1
  6. Here we go, just realized I can insert the photos without uploading, didn't notice the icon on mobile.

    Prime/WA brass SFA V10, all stock parts short of the steel outer barrel.

    PO42p67.jpg
    qriUR52.jpgNebu6CM.jpguvKtdZg.jpg

    • Like 2
  7. Some old, the SFA Micro compact I just got finished earlier this year. This is a small portion of my collection. A fair amount of metal bodied kits, though I've got around 150 WA's.

    Lots, and lots, and lots of time browsing the Yahoo Japan auctions, and occasionally help from friends in Japan. 

  8. These photos have smaller file sizes, should be good.

     

    WA Nighthawk T3 with some unknown brand of slide. 100% positive it isn't Prime, Edge, Sheriff, Zeke, or the other few companies which typically make WA slides. Recoil spring guide and other parts are unique to the slide, they aren't compatible with my other stock T3 slide.

     

    Here's another photo of it which was too large to upload. https://imgur.com/a/PtB3J0c

    post-99212-0-08116000-1525029172_thumb.jpeg

    • Like 1
  9. Hey all, got some great news.

    Wii Tech is planning on potentially producing new parts, most notably a steel trigger assembly sometime in the next few months. 

    Edit: So I'm gathering info on how many people would be interested in getting a set for them. Would anyone be interested?

    • Like 1
  10. If it's just the length of the dust cover, maybe consider Grim's approach with his GHKs and real steel covers. He purposely shortens the cover just a touch so that it fits forward of the lip on the rear trunnion.

    Shortening it wouldn't be possible with the design, and even then the receiver is just too long for the dust cover. The cover connects to the hinge with two screws. I removed one of them to lengthen it, and even then it wasn't enough.

     

    Lemme upload another picture.

     

    Edit: Here we go. http://imgur.com/a/SNKOy

  11. I don't know why would you want that, but a spring buffer like FG-Airsoft's or Team GBB's might be a good alternative for it. Trying to achieve it with the recoil spring only will require a complex irregular spring, if possible at all. 

    I'm planning on trying those eventually, I just want to avoid any unnecessary impactor force being transferred to the rear trunnion considering I thinned it quite a bit. The "wall" portion the recoil spring guide block sits into is around 2mm thick now. Not super bad considering the steel is quite durable (took me quite a few hours to take it down that far), but I want to avoid causing any damage to it. 

     

    Might be a non-issue, though still something I'd rather not have happen.

  12. My gun came with a broken nozzle where the strips the bb from the mag, though I got it and four mags for less than $100 so I can't really complain. I'm not super keen on aluminum nozzles, though I might check it out eventually, depends on how well it looks. Hopefully we can sway them to produce more parts, especially a valve knocker. If not, the "WE" steel parts may fit well with it, I'm not sure yet.

    Anyways, an update on my build. 

    Wii tech parts haven't arrived, so I haven't done much internally.


    I ordered an Ergo grip which fit wonderfully. The screw it came with was the same threading as the stock screw, though the grip still wobbles a bit because I don't have any of those support pins in place.


    TWS haven't produce many of their Gen 3 fore ends, so I'm waiting for them to restock. I did manage to get their Gen 3 dust cover however. The dust cover, even with it's adjustment piece was too short, which unfortunately means that the WE AK bodies are AEG spec, or close to it. Instead of giving up, I took to filing at the rear trunnion, taking off just about 5mm. Gun still functions, though the dust cover has a bit of up and down play on the recoil spring guide bloc. Luckily it came with a custom guide block, as well as a more traditional wire style spring guide. I'm considering getting a front portion, and seeing how well it works compared to the WE style guide. I'm unfortunately stuck with a gap, noticeable on the very front of the receiver, and especially when the selector is put on safe. A friend suggested putting on a real selector, which could possibly close the noticeable gap a bit more. Only other thing is that I've got a bit of cleanup work to do on the receiver where I filed it, though that's a non-issue.

    Also, does anyone have any recoil spring suggestions? I'd like to grab a stronger spring which is weak enough to allow standard blowback, though I'd also like it to be strong enough to avoid it from hitting the rear of the trunnion.

    http://imgur.com/a/SNKOy
     

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.